robyrew / msi_x570_a-pro_hackintosh_opencore Goto Github PK

You will continue to support?

The last release is not working for me. I have a bunch of errors upon startup. The picture is below (sry for quality)

The only release that I was managed to start was 0.6.9 but this version does not work with the latest macOS.

I used your efi file to install Monterrey, but stuck on the black apple progress bar, please help and guide, thank you!

There is a problem when restarting the computer through the Apple menu it's turning on again after shutdown.
Same motherboard but a different graphics card (5700 XT from Sapphire).

First of all, many thanks @RobyRew for this guide!

Trying to clone your setup, I bought almost identical hardware: same motherboard, Ryzen 5950X (I couldn't get a Ryzen 3950X, they're out of stock, too old probably), 2x 32GB 3200MHz memory; and I re-used a Radeon 570 GPU from my old Intel Hackintosh.

I updated BIOS to the latest version 7C37vHH (2022/05/24), loaded default values, and did these changes:

• Above 4G memory/Crypto Currency mining: Enabled
• DRAM Frequency: DDR4-3200
• Serial(COM) Port: Disabled
• Secure Boot: Disabled
• Resume By USB Device: Enabled
• Boot Order (1st UEFI USB Key, 2nd UEFI Hard Disk)

I created a bootable USB key with your EFI folder cloned and a HFS+ partition with the macOS installer. First OpenCore crashed before displaying the picker. The error messages pointed me to issues in the config.plist, and I could solve them by these changes to config.plist:

• convert UEFI / Drivers / Item0 etc. from type dictionary to type string, just holding the strings HfsPlus.efi and OpenRuntime.efi
• remove UEFI / Quirks / ForceOcWriteFlash

(Later I noticed the reason for these errors is that your commit "Updated to OpenCore 0.7.3" includes config.plist but is missing the OpenCore binaries BOOT / BOOTx64.efi, OC / OpenCore.efi, and OC / Drivers / OpenRuntime.efi and OpenCanopy.efi, so instead of my changes to config.plist one can just update these mentioned OpenCore binaries.)

Then OpenCore booted into the picker, found the USB key partition with the installer, and started it. However, then it freezes with just the Apple logo being displayed on the screen. I found out that I can get some details displayed by adding -v to the NVRAM / Add / 7C436110-AB2A-4BBB-A880-FE41995C9F82 / boot-args string in config.plist. I then see (last lines before freeze):

...
[EB|`B:WFDW] Err(0xE), 0 @ LocHB 71B4903C-14EC-42C4-BDC6-CE1449930E49
[EB|#LOG:DT] 2022-07-07T18:18:38
[EB|#LOG:EXITBS:START] 2022-07-07T18:18:38

To rule out issues with OpenCore version 0.7.2, I also tried the debug build of v0.7.2, and release and debug builds of v0.7.3 and v0.8.2 (latest). Each time I ran into exactly the same error. Doing a Google search for the error displayed, I just found discussions with people guessing it could be a GPU issue. As my GPU ran without any problems in my older Intel Hackintosh, the hardware must be working with OpenCore; so the problem should be something else, or do you think that it's possible that a well supported GPU doesn't work in combination with this motherboard / CPU?

I'm wondering if I'm missing some important BIOS setting. In your guide you just write:

After Updating the BIOS, you need some configuration to working.

Can you please share what changes exactly you made? The easiest way to figure this out would be in advanced view (F7), section Settings\Save & Exit

• Restore Defaults
• Save Changes and Reboot (but decline by choosing "NO")

as the save configuration dialog displays a list of which values it would revert.

I cannot find the appropriate smbios. Can I get a valid serial number for amd ryzen 7 3800x 8-core msi x570 a pro?