Code Monkey home page Code Monkey logo

wavegain's Introduction

ReplayGain for wave files, v1.3.2

WaveGain is an application of the ReplayGain algorithms to standard PCM wave
files. Calculated gain adjustments are applied directly to the audio data,
instead of just writing metadata as traditionally done for other formats
like MP3, FLAC and Ogg Vorbis.

The replaygain values can also be added as metadata in a custom RIFF chunk
named 'gain'. This could theoretically allow WAV files to have same lossless
functionality as other formats where audio data is not altered. But since no
current players are aware of this "standard", the metadata is used only by
WaveGain for the "--undo-gain" feature, which is lossy.


About replaygain
-------------------------------------------------------------------------------

Replaygain is a standard that allows compatible players to play audio files with
an adjusted volume gain so they have a consistent perceived loudness.

It is similar in concept to Normalization, but instead of using just the peak
value to calculate the gain, it relies on RMS (sound pressure "power") values
and psychoacoustics models to calculate a gain based on the perceived loudness
of an audio file by a human listener.

Loudness can be averaged either for each individual file, also called "Track" or
"Radio" mode, where every song is adjusted to the same standard loudness; or by
group, also called "Album" mode, where individual "songs" may sound louder or
quieter than others, but each "album" as a whole has the same average loudness
as other albums.

For more information,
http://en.wikipedia.org/wiki/ReplayGain
http://wiki.hydrogenaudio.org/index.php?title=Replaygain
http://wiki.hydrogenaudio.org/index.php?title=ReplayGain_specification


The saga of a Debian package for wavegain:
-------------------------------------------------------------------------------

- Current source code (in .zip format) and windows binaries are published at
	http://www.rarewares.org/others.php
	http://www.rarewares.org/files/others/

- An i386 binary .deb for version 1.2.6 (from 2005) was published at
	http://www.rarewares.org/debian/packages/unstable/index.php

- Later, Linux Mint hosted the source, amd64 and i386 packages for v1.2.8 (2010)
	http://packages.linuxmint.com/pool/import/w/wavegain/

This package is a combination of current upstream source, a proper Debian
packaging improved from the Mint release, and some patches to fix some
(serious) Linux issues.


Install how-to
-------------------------------------------------------------------------------

There are 2 approaches: you can build and install a .deb package, or simply
compile and install from source. For both I assume you are already at the
source directory (which is not the root directory of the cloned repository)

Debian method:
This is OUTDATED, UNMAINTANED and NON-WORKING! Use Traditional Method instead!
$ sudo apt-get install devscripts # if you don't already have debuild
$ debuild -- binary && sudo dpkg --install ../wavegain_*.deb

Traditional method:
$ make && sudo make install # by default installs to /usr/local/bin/wavegain
or
$ make && sudo make install prefix=/usr # to install to /usr/bin/wavegain

Currently, 64-bit binaries build fine but can generate corrupted audio on output
files, so to prevent this by default it builts a 32-bit executable instead,
which runs and works fine on 64-bit architectures. However, multi-arch libraries
and headers might be needed as a pre-requiste for compiling. On Debian/Ubuntu this
can be installed by:

	sudo apt install gcc-multilib


Pre-compiled binaries and old versions
-------------------------------------------------------------------------------
You can find pre-compiled .DEB binariy packages for i386 and amd64, as well
as as some other goodies, like a mega-archive of all previous versions
and a (lame and outdated) html manual in the Downloads section of GitHub:

https://github.com/MestreLion/wavegain/downloads


License and copyright
-------------------------------------------------------------------------------

WaveGain is Copyright (c) 2002-2010 John Edwards <[email protected]>,
a.k.a. John33, and several other co-authors and contributors are mentioned as
Copyright owners in the source files.

Originally released as LGPL-2.1 or later, although some source code simply says
GPL, and some others some says GPL2+. Despite this, the project as a whole
should be regarded as LGPL-2.1+, as per COPYING file. To avoid further confusion
in the future, I suggest source files be standartized with a common header and
re-licensed, preferably as GPL-3 or later (not LGPL).

I claim no copyright over the C source code, including patches I made.

The Debianization and aditional material, like this README and Makefile, is
Copyright (c) 2012 Rodrigo Silva (MestreLion)


Documentation (from wavegain --help)
-------------------------------------------------------------------------------

Copyright (c) 2002-2010 John Edwards <[email protected]>
Additional code by Magnus Holmgren, Gian-Carlo Pascutto, and Tycho

 Usage: wavegain [options] input.wav [...]

 OPTIONS
  -h, --help       Prints this help information.
  -a, --album      Use ReplayGain Audiophile/Album gain setting, or
  -r, --radio      Use ReplayGain Radio/Single Track gain setting(DEFAULT).
  -q, --adc        Apply Album based DC Offset correction.
                   DEFAULT is Track based DC Offset correction.
  -p, --no_offset  Do NOT apply DC Offset correction.
  -c, --calculate  Calculates and prints gain settings, and DC Offsets BUT
                   DOES NOT APPLY THEM - This is the DEFAULT.
  -x, --scale      Writes scale values to stdout in the format: n.nnnnnn
                   In Album mode it only writes the Album Scale value, and
                   in Title mode it only writes the Title Scale values.
                   ONLY works in Calculation mode.
  -y, --apply      Calculates and APPLIES gain settings, and applies
                   DC Offset correction.
  -w, --write      Writes a 'gain' chunk into the Wave Header.
                   Stores the scalefactor applied to the wave data as a
                   double floating point number. Only written when gain
                   is applied. Presence will result in file being skipped
                   if reprocessed.
                   (Unless '--force' or '--undo-gain' are specified.)
      --force      Forces the reprocessing of a file that contains a 'gain'
                   chunk and will result in the new scalefactor overwriting
                   the existing value.
      --undo-gain  Reads the scalefactor in the 'gain' chunk and uses the
                   value to reverse the previously applied gain. This will NOT
                   recreate a bit identical version of the original file, but
                   it will be rescaled to the original level.
  -z, --recursive  Search for files recursively, each folder as an album
  -l, --log        Write log file.(Default filename = WGLog.txt)
  -f, --logfile    Specify log filename. (Assumes -l if present.)
  -n, --noclip     NO Clipping Prevention.
  -d, --dither X   Dither output, where X =
               0   for       dither OFF (default).
               1   for       dither without Noise Shaping.
               2   for       dither with Light Noise Shaping.
               3   for       dither with Medium Noise Shaping.
               4   for       dither with Heavy Noise Shaping.
  -t, --limiter    Apply 6dB Hard Limiter to output.
  -g, --gain X     Apply additional Manual Gain adjustment in decibels, where
             X = any floating point number between -20.0 and +12.0.
                   Clipping Prevention WILL be applied UNLESS '-n' is used.
  -s, --fast       Calculates and prints gain settings - DOES NOT APPLY THEM.
                   NOTE: This method does NOT process all samples, it only
                         processes 200 x 16k chunks of samples. Results will
                         NOT be as accurate as a full analysis but, with most
                         material, will be within +/- 0.5db. Files of 8,192,000
                         real samples, or less, will be analysed in full.
                         DC Offset is neither calculated nor corrected in
                         FAST mode.
  -o, --stdout     Write output file to stdout.
 FORMAT OPTIONS (One option ONLY may be used)
  -b, --bits X     Set output sample format, where X =
             1     for        8 bit unsigned PCM data.
             2     for       16 bit signed PCM data.
             3     for       24 bit signed PCM data.
             4     for       32 bit signed PCM data.
             5     for       32 bit floats.
             6     for       16 bit 'aiff' format.
         NOTE:     By default, the output file will be of the same bitwidth
                   and type as the input file.
 INPUT FILES
  WaveGain input files may be 8, 16, 24 or 32 bit integer, or floating point
  wave files with 1 or 2 channels and a sample rate of 96000Hz, 88200Hz,
  64000Hz, 48000Hz, 44100Hz, 32000Hz, 24000Hz, 22050Hz, 16000Hz, 12000Hz,
  11025Hz or 8000Hz.
  16 bit integer 'aiff' files are also supported.
  Wildcards (?, *) can be used in the filename, or '-' for stdin.


wavegain-1.3.2

wavegain's People

Contributors

mestrelion avatar bwagner avatar xiaoxiongwang avatar

Watchers

James Cloos avatar

Recommend Projects

  • React photo React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo Vue.js

    ๐Ÿ–– Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo Django

    The Web framework for perfectionists with deadlines.

  • D3 photo D3

    Bring data to life with SVG, Canvas and HTML. ๐Ÿ“Š๐Ÿ“ˆ๐ŸŽ‰

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo Microsoft

    Open source projects and samples from Microsoft.

  • Google photo Google

    Google โค๏ธ Open Source for everyone.

  • D3 photo D3

    Data-Driven Documents codes.