Network Flight Recorder

NFR is a lightweight application which processes network traffic using the AlphaSOC Analytics Engine. NFR can monitor log files on disk (e.g. Microsoft DNS debug logs, Bro IDS logs) or run as a network sniffer under Linux to score traffic. Upon processing the data, alerts are presented in either JSON or CEF format for escalation via syslog.

Installation

Download NFR from the releases section. Once downloaded, run NFR as follows:

# nfr --help
Network Flight Recorder (NFR) is an application which captures network traffic
and provides deep analysis and alerting of suspicious events, identifying gaps
in your security controls, highlighting targeted attacks, and policy violations.

Usage:
  nfr [command] [argument]

Available Commands:
  account register       Generate an API key via the licensing server
  account reset [email]  Reset the API key associated with a given email address
  account status         Show the status of your AlphaSOC API key and license
  read [file]            Read network events from a PCAP file on disk
  start                  Start processing network events (inputs defined in config)
  version                Show the NFR binary version
  help                   Provides help and usage instructions

Use "nfr [command] --help" for more information about a given command.

Configuration

NFR expects to find its configuration file in /etc/nfr/config.yml. You can find an example config.yml file in the repository's root directory. The file defines the AlphaSOC Analytics Engine location and configuration, input preferences (e.g. log files to monitor), output preferences, and other variables. If you already have AlphaSOC API key, update the file with your key and place within the /etc/nfr/ directory.

If you are a new user, simply run nfr account register to create the file and generate an API key, e.g.

# nfr account register
Please provide your details to generate an AlphaSOC API key.
A valid email address is required for activation purposes.

By performing this request you agree to our Terms of Service and Privacy Policy
(https://www.alphasoc.com/terms-of-service)

Full Name: Joey Bag O'Donuts
Email: [email protected]

Success! The configuration has been written to /etc/nfr/config.yml
Next, check your email and click the verification link to activate your API key.

Processing events from the network

If you are running NFR under Linux, use the sniffer directive within /etc/nfr/config.yml to specify a network interface to monitor. To monitor interface eth1 you can use the configuration below.

  sniffer:
    enabled: true
    interface: eth1

Processing events from disk

Use the monitor directive within /etc/nfr/config.yml to actively read log files from disk. Bro IDS (Zeek) logs both DNS, IP, and HTTP traffic, whereas Suricata only logs DNS traffic. To monitor both Bro conn.log, dns.log, and http.log output you can use this configuration:

monitor:
  - format: bro
    type: dns
    file: /path/to/dns.log
  - format: bro
    type: ip
    file: /path/to/conn.log
  - format: bro
    type: http
    file: /path/to/http.log

To process Suricata DNS output you would use:

monitor:
  - format: suricata
    type: dns
    file: /path/to/eve.json

Microsoft DNS (format: msdns) and BIND over syslog (format: syslog-named) are also supported at this time. Please contact [email protected] if you have a particular use case and wish to monitor a file format that is not listed here. If you wish to process events from a given PCAP file on disk, please use the read command when running NFR.

Monitoring scope

Use directives within /etc/nfr/scope.yml to define the monitoring scope. You can find an example scope.yml file in the repository's root directory. Network traffic from the IP ranges within scope will be processed by the AlphaSOC Analytics Engine, and domains that are whitelisted (e.g. internal trusted domains) will be ignored. Adjust scope.yml to define the networks and systems that you wish to monitor, and the events to discard, e.g.

groups:
  private_network:
    label: "Private network"
    in_scope:
      - 10.0.0.0/8
      - 192.168.0.0/16
    out_scope:
      - 10.1.0.0/16
      - 10.2.0.254/32
    trusted_domains:
      - "*.example.com"
      - "*.alphasoc.net"
      - "google.com"
  public_network:
    label: "Private network"
    in_scope:
      - 131.1.0.0/16
  my_own_group:
    label: "Custom group"
    in_scope:
      - 131.2.0.0/16
    trusted_domains:
      - "site.net"
      - "*.internal.company.org"

Running NFR

You may run nfr start via tmux or screen under Linux, or set up a service (detailed in the following section). NFR returns alert data in JSON format to stderr. Below an example in which raw the JSON is both stored on disk at /tmp/alerts.json and rendered via jq to make it human-readable in the terminal.

# nfr start 2>&1 >/dev/null | tee /tmp/alerts.json | jq .
{
  "type": "alert",
  "eventType": "dns",
  "flags": [
    "apt",
    "freedns"
  ],
  "groups": [
    {
      "label": "default",
      "desc": "Default"
    }
  ],
  "threats": {
    "c2_communication": {
      "severity": 5,
      "desc": "C2 communication attempt indicating infection",
      "policy": false
    }
  },
  "ts": "2018-09-03T09:39:47Z",
  "srcIp": "10.15.0.4",
  "query": "microsoft775.com",
  "recordType": "A"
}

Running NFR as a service

Under Linux

If you are using a current Linux distribution (e.g. RHEL7, Ubuntu 16), it will have systemd installed. Follow these steps as root to run NFR as a service:

1. Create the NFR configuration directory and copy config.yml and scope.yml into it

mkdir /etc/nfr
cp config.yml /etc/nfr
cp scope.yml /etc/nfr

2. Copy the nfr binary into /usr/local/bin and ensure it's executable

cp nfr /usr/local/bin
chmod a+x /usr/local/bin/nfr

3. Create the NFR service files for systemd

cat > /etc/systemd/system/nfr.service << EOF

[Unit]
Description=AlphaSOC Network Flight Recorder
After=network.target

[Service]
Type=simple
ExecStart=/usr/local/bin/nfr start
Restart=always

[Install]
WantedBy=multi-user.target
EOF

4. Use systemctl to enable NFR, start the service, and review its status

systemctl enable nfr
systemctl start nfr
systemctl status nfr

Once NFR is installed, you can view logs and troubleshoot using journalctl -u nfr.

To stop and remove the service, follow these steps:

systemctl stop nfr
systemctl disable nfr
rm /etc/systemd/system/nfr.service

Under Microsoft Windows

To run NFR as a service under Windows, first install NSSM, and follow the steps below within PowerShell as Administrator.

1. Create the NFR configuration directory and copy config.yml and scope.yml into it

New-Item -ItemType directory -Path $Env:AppData\nfr
Move-Item -Path config.yml -Destination $Env:AppData\nfr
Move-Item -Path scope.yml -Destination $Env:AppData\nfr

2. Use NSSM to install the service, start it, and review status (note: modify the path to nfr.exe as needed)

nssm.exe install nfr C:\path\to\nfr.exe start
nssm.exe start nfr
nssm.exe status nfr

To stop and remove the service, follow these steps:

nssm.exe stop nfr
nssm.exe remove nfr