Question: Does the VRCompositor Window need to be open for the rendering to continue? about openvr-opentrack HOT 7 CLOSED

Yes, It worked!!

You should probably add this to the documentation. Although you only have to click one time in the window, from then on, it works fine!

from openvr-opentrack.

Hello, if the picture does not keep up with the image in VR, then either the debug mode is enabled, or the GPU performance is not enough.

from openvr-opentrack.

I don't think you got the message right, it's my fault. I will try to get a video recorded about this as soon as possible. Currently having some issues with a PlayStation Move camera.

from openvr-opentrack.

Alright, so I've got footage of the problem. The first part is The problem I have, and second part (after the black screen) is the driver functioning perfectly (dont mind the performance issues, my pc doesn't handle recording very well). The problem happens when the VRCompositor window isn't focused.

I have attached a video.

from openvr-opentrack.

Is DebugMode turned off in the config file?
I see that the bar is red, it means that the GPU is not recovering from the load.
What video card do you have? Maybe you should lower renderWidth, renderHeight, to 720 by 720 or lower.

from openvr-opentrack.

I would say the most important part of the video is the first part (before the black screen). I have never had any performance problem. I have a GTX 1060 3GB. And yes, debug mode is turned off.

EDIT: Here's the steamvr performance test results.

from openvr-opentrack.

https://github.com/r57zone/OpenVR-OpenTrack/releases/download/1.0/SteamVR.OpenTrack.UDP.1.0.zip
Try a driver with UDP support, change Output to UDP and change its address to 127.0.0.1, will that help?

from openvr-opentrack.