r1me / tapexum Goto Github PK

Hi.

Is there any recommended way to program .hex file to Arduino Pro Micro (Leonardo) ?

I have the issue as below:

https://i.imgur.com/XYd78Y6.png

Should the firmware:
https://github.com/r1me/TapeXUM/tree/main/firmware

work with this module:
https://shopee.pl/Baipestotoy-Pro-Micro-ATmega32U4-5-V-16-MHz-Wymie%C5%84-ATmega328-Arduino-Pro-Mini-i.550891774.12958189188

Is / should be the uC on this module compatibile with this .hex ?

Hi.

I just run the tapeXum for the first time. Everything seems to work correctly.
I take one of my tapes. At first I checked it on my real C64 and Datasette.
Games are loading correctlu, without errors then run succesfully.

So I decided to grab it using TapeXUM.

At fiirst I created the .cap file:

tapread -c64pal kaseta.cap

then i converted it to .tap file:

cap2tap kaseta.cap kaseta.tap

Loaded into Vice .tap file seems to be correct:

But then notheing can be run properly:

Any ideas ?

Could you please investigate my output files then ? Maybe @ your Vice it will work then ?

https://drive.google.com/drive/folders/12xA4-uFq5N9pycovz5vFrBZfL38H6PY9?usp=sharing

Thank you and best regards
Mariusz

Hello

This is a really neat project!
Could you please release the source code of the firmware?
Further I have difficulty finding the code for the firmware this is based on, could you give me a link?

Thanks!

Please publicate some documentation regarding the software.
I can see only some .pas sources, unfortunately I don't practice this language.

Could you please to be so kind and publish somewhere the guide step by step:

• which compiler could be used
• how to compile each application step by step
• how to use it

Generaly short documentation for supplied software could be very usefull.

This project is very very interesting but really poor documented (maybe available just a professional coders).

This project looks to be so great that it could be really too bad to waste it.

Thank you and best regards
Mariusz

Hi :-)

What is behind this crazy idea of use 0.1 uF electrolytic capacitor?
https://i.imgur.com/Gs0jLsC.png
https://i.imgur.com/7Lc5MwK.png

Why didn't you use just standard unpolarized capacitor e.g. 100 nF / 50V ?

Is there seriously any reason to use 0.1 uF electrolytic capacitor?

The BOM lists a 9VDC power supply. The schematic shows 6VDC. Which is the correct supply voltage?