---
# The node type - server or agent
rke2_type: server

# Deploy the control plane in HA mode
rke2_ha_mode: false

# Install and configure Keepalived on Server nodes
# Can be disabled if you are using pre-configured Load Balancer
rke2_ha_mode_keepalived: true

# Install and configure kube-vip LB and VIP for cluster
# rke2_ha_mode_keepalived needs to be false
rke2_ha_mode_kubevip: false

# Kubernetes API and RKE2 registration IP address. The default Address is the IPv4 of the Server/Master node.
# In HA mode choose a static IP which will be set as VIP in keepalived.
# Or if the keepalived is disabled, use IP address of your LB.
rke2_api_ip: "{{ hostvars[groups[rke2_servers_group_name].0]['ansible_default_ipv4']['address'] }}"

# optional option for RKE2 Server to listen on a private IP address on port 9345
# rke2_api_private_ip:

# optional option for kubevip IP subnet
# rke2_api_cidr: 24

# optional option for kubevip
# rke2_interface: eth0

# kubevip load balancer IP range
rke2_loadbalancer_ip_range: {}
#  range-global: 192.168.1.50-192.168.1.100
#  cidr-finance: 192.168.0.220/29,192.168.0.230/29

# Install kubevip cloud provider if rke2_ha_mode_kubevip is true
rke2_kubevip_cloud_provider_enable: true

# Enable kube-vip to watch Services of type LoadBalancer
rke2_kubevip_svc_enable: true

# Specify which image is used for kube-vip container
rke2_kubevip_image: ghcr.io/kube-vip/kube-vip:v0.5.5

# Add additional SANs in k8s API TLS cert
rke2_additional_sans: []

# API Server destination port
rke2_apiserver_dest_port: 6443

# Server nodes taints
rke2_server_node_taints: []
  # - 'CriticalAddonsOnly=true:NoExecute'

# Agent nodes taints
rke2_agent_node_taints: []

# Pre-shared secret token that other server or agent nodes will register with when connecting to the cluster
rke2_token: defaultSecret12345

# RKE2 version
rke2_version: v1.25.3+rke2r1

# URL to RKE2 repository
rke2_channel_url: https://update.rke2.io/v1-release/channels

# URL to RKE2 install bash script
# e.g. rancher chinase mirror http://rancher-mirror.rancher.cn/rke2/install.sh
rke2_install_bash_url: https://get.rke2.io

# Local data directory for RKE2
rke2_data_path: /var/lib/rancher/rke2

# Default URL to fetch artifacts
rke2_artifact_url: https://github.com/rancher/rke2/releases/download/

# Local path to store artifacts
rke2_artifact_path: /rke2/artifact

# Airgap required artifacts
rke2_artifact:
  - sha256sum-{{ rke2_architecture }}.txt
  - rke2.linux-{{ rke2_architecture }}.tar.gz
  - rke2-images.linux-{{ rke2_architecture }}.tar.zst

# Changes the deploy strategy to install based on local artifacts
rke2_airgap_mode: false

# Airgap implementation type - download, copy or exists
# - 'download' will fetch the artifacts on each node,
# - 'copy' will transfer local files in 'rke2_artifact' to the nodes,
# - 'exists' assumes 'rke2_artifact' files are already stored in 'rke2_artifact_path'
rke2_airgap_implementation: download

# Local source path where artifacts are stored
rke2_airgap_copy_sourcepath: local_artifacts

# Tarball images for additional components to be copied from rke2_airgap_copy_sourcepath to the nodes
# (File extensions in the list and on the real files must be retained)
rke2_airgap_copy_additional_tarballs: []

# Destination for airgap additional images tarballs ( see https://docs.rke2.io/install/airgap/#tarball-method )
rke2_tarball_images_path: "{{ rke2_data_path }}/agent/images"

# Architecture to be downloaded, currently there are releases for amd64 and s390x
rke2_architecture: amd64

# Destination directory for RKE2 installation script
rke2_install_script_dir: /var/tmp

# RKE2 channel
rke2_channel: stable

# Do not deploy packaged components and delete any deployed components
# Valid items: rke2-canal, rke2-coredns, rke2-ingress-nginx, rke2-metrics-server
rke2_disable:

# Option to disable kube-proxy
disable_kube_proxy: false

# Path to custom manifests deployed during the RKE2 installation
# It is possible to use Jinja2 templating in the manifests
rke2_custom_manifests:

# Path to static pods deployed during the RKE2 installation
rke2_static_pods:

# Configure custom Containerd Registry
rke2_custom_registry_mirrors: []
  # - name:
  #   endpoint: {}
#   rewrite: '"^rancher/(.*)": "mirrorproject/rancher-images/$1"'

# Configure custom Containerd Registry additional configuration
rke2_custom_registry_configs: []
#   - endpoint:
#     config:

# Path to Container registry config file template
rke2_custom_registry_path: templates/registries.yaml.j2

# Path to RKE2 config file template
rke2_config: templates/config.yaml.j2

# Etcd snapshot source directory
rke2_etcd_snapshot_source_dir: etcd_snapshots

# Etcd snapshot file name.
# When the file name is defined, the etcd will be restored on initial deployment Ansible run.
# The etcd will be restored only during the initial run, so even if you will leave the the file name specified,
# the etcd will remain untouched during the next runs.
# You can either use this or set options in `rke2_etcd_snapshot_s3_options`
rke2_etcd_snapshot_file:

# Etcd snapshot location
rke2_etcd_snapshot_destination_dir: "{{ rke2_data_path }}/server/db/snapshots"

# Etcd snapshot s3 options
# Set either all these values or `rke2_etcd_snapshot_file` and `rke2_etcd_snapshot_source_dir`

# rke2_etcd_snapshot_s3_options:
  # s3_endpoint: "" # required
  # access_key: "" # required
  # secret_key: "" # required
  # bucket: "" # required
  # snapshot_name: "" # required.
  # skip_ssl_verify: false # optional
  # endpoint_ca: "" # optional. Can skip if using defaults
  # region: "" # optional - defaults to us-east-1
  # folder: "" # optional - defaults to top level of bucket
# Override default containerd snapshotter
rke2_snapshooter: overlayfs

# Deploy RKE2 with default CNI canal
rke2_cni: canal

# Validate system configuration against the selected benchmark
# (Supported value is "cis-1.23" or eventually "cis-1.6" if you are running RKE2 prior 1.25)
rke2_cis_profile: ""

# Download Kubernetes config file to the Ansible controller
rke2_download_kubeconf: false

# Name of the Kubernetes config file will be downloaded to the Ansible controller
rke2_download_kubeconf_file_name: rke2.yaml

# Destination directory where the Kubernetes config file will be downloaded to the Ansible controller
rke2_download_kubeconf_path: /tmp

# Default Ansible Inventory Group name for RKE2 cluster
rke2_cluster_group_name: k8s_cluster

# Default Ansible Inventory Group name for RKE2 Servers
rke2_servers_group_name: masters

# Default Ansible Inventory Group name for RKE2 Agents
rke2_agents_group_name: workers

# (Optional) A list of Kubernetes API server flags
# All flags can be found here https://kubernetes.io/docs/reference/command-line-tools-reference/kube-apiserver
# rke2_kube_apiserver_args: []

# (Optional) List of Node labels
# k8s_node_label: []

# (Optional) Additional RKE2 server configuration options
# You could find the flags at https://docs.rke2.io/install/install_options/install_options/#configuring-rke2-server-nodes
# rke2_server_options:
#   - "option: value"

# (Optional) Additional RKE2 agent configuration options
# You could find the flags at https://docs.rke2.io/install/install_options/install_options/#configuring-linux-rke2-agent-nodes
# rke2_agent_options:
#   - "option: value"

# (Optional) Configure Proxy
# All flags can be found here https://github.com/rancher/rke2/blob/master/docs/advanced.md#configuring-an-http-proxy
# rke2_environment_options: []
#   - "option=value"
#   - "HTTP_PROXY=http://your-proxy.example.com:8888"

# (Optional) Customize default kube-controller-manager arguments
# This functionality allows appending the argument if it is not present by default or replacing it if it already exists.
# rke2_kube_controller_manager_arg:
#   - "bind-address=0.0.0.0"

# (Optional) Customize default kube-scheduler arguments
# This functionality allows appending the argument if it is not present by default or replacing it if it already exists.
# rke2_kube_scheduler_arg:
#   - "bind-address=0.0.0.0"

# Cordon, drain the node which is being upgraded. Uncordon the node once the RKE2 upgraded
rke2_drain_node_during_upgrade: false

# Wait for all pods to be ready after rke2-service restart during rolling restart.
rke2_wait_for_all_pods_to_be_ready: false

# Enable debug mode (rke2-service)
rke2_debug: false

- name: Deploy RKE2
  hosts: node
  become: yes
  roles:
     - role: lablabs.rke2

- name: Deploy RKE2
  hosts: all
  become: yes
  roles:
     - role: lablabs.rke2

- name: Deploy RKE2
  hosts: all
  become: yes
  vars:
    rke2_airgap_mode: true
    rke2_airgap_implementation: download
    rke2_cni:
      - multus
      - calico
    rke2_artifact:
      - sha256sum-{{ rke2_architecture }}.txt
      - rke2.linux-{{ rke2_architecture }}.tar.gz
      - rke2-images.linux-{{ rke2_architecture }}.tar.zst
    rke2_airgap_copy_additional_tarballs:
      - rke2-images-multus.linux-{{ rke2_architecture }}
      - rke2-images-calico.linux-{{ rke2_architecture }}
  roles:
     - role: lablabs.rke2

- name: Deploy RKE2
  hosts: all
  become: yes
  vars:
    rke2_ha_mode: true
    rke2_api_ip : 192.168.123.100
    rke2_download_kubeconf: true
    rke2_server_node_taints:
      - 'CriticalAddonsOnly=true:NoExecute'
  roles:
     - role: lablabs.rke2

rke2_token: defaultSecret12345
rke2_agent_token: agentSecret54321

rke2_token: agentSecret54321