for Any GPU NVIDIA / AMD / Intel

for NVIDIA GPU 8Gb VRAM or more

---

English | Русский

ReActor Force for Stable Diffusion

The Fast and Simple FaceSwap Extension with a lot of improvements and without NSFW filter (uncensored, use it on your own responsibility)

Support This Project

ReActor is an extension for Stable Diffusion WebUI that allows a very easy and accurate face-replacement (face swap) in images. Based on SD WebUI ReActor.

Donate to This Project

Automatic1111 | Vladmandic SD.Next | Google Colab SD WebUI

If you use AUTOMATIC1111 web-ui:

1. (For Windows Users):

• Install Visual Studio 2022 (Community version, for example - you need this step to build some of dependencies): https://visualstudio.microsoft.com/downloads/
• OR only VS C++ Build Tools (if you don't need the whole Visual Studio) and select "Desktop Development with C++" under "Workloads -> Desktop & Mobile": https://visualstudio.microsoft.com/visual-cpp-build-tools/
• OR if you don't want to install VS or VS C++ BT - follow this steps (sec. VIII)

2. In web-ui, go to the "Extensions" tab and use this URL https://github.com/Gourieff/sd-webui-reactor-force in the "Install from URL" tab and click "Install"
3. Please, wait for several minutes until the installation process will be finished
4. Check the last message in your SD-WebUI Console:

• If you see the message "--- PLEASE, RESTART the Server! ---" - so, do it, stop the Server (CTRL+C or CMD+C) and start it again - or just go to the "Installed" tab (if you have any other Roop-based extension enabled - disable it, otherwise this extension won't work), click "Apply and restart UI"
• If you see the message "Done!", just go to the "Installed" tab (if you have any other Roop-based extension enabled - disable it, otherwise this extension won't work), click "Apply and restart UI" - or you can just simply reload the UI

5. Enjoy!

If you use SD.Next:

1. Close (stop) your SD WebUI Server if it's running
2. (For Windows Users) See the 1st step for Automatic1111 (if you followed this steps (sec. VIII) instead - go to the Step 5)
3. Go to (Windows)automatic\venv\Scripts or (MacOS/Linux)automatic/venv/bin, run Terminal or Console (cmd) for that folder and type activate
4. Run pip install insightface==0.7.3
5. Run SD.Next, go to the "Extensions" tab and use this URL https://github.com/Gourieff/sd-webui-reactor-force in the "Install from URL" tab and click "Install"
6. Please, wait for several minutes until the installation process will be finished
7. Check the last message in your SD.Next Console:

• If you see the message "--- PLEASE, RESTART the Server! ---" - so, do it, stop the Server (CTRL+C or CMD+C) and start it again - or just go to the "Installed" tab (if you have any other Roop-based extension enabled - disable it, otherwise this extension won't work), click "Restart the UI"

8. Stop SD.Next, go to the automatic\extensions\sd-webui-reactor-force directory - if you see there models\insightface folder with the file inswapper_128.onnx, just move the file to the automatic\models\insightface folder
9. Run your SD.Next WebUI and enjoy!

If you use Cagliostro Colab UI:

1. In active WebUI, go to the "Extensions" tab and use this URL https://github.com/Gourieff/sd-webui-reactor-force in the "Install from URL" tab and click "Install"
2. Please, wait for several minutes until the installation process will be finished
3. When you see the message "--- PLEASE, RESTART the Server! ---" (in your Colab Notebook Start UI section "Start Cagliostro Colab UI") - just go to the "Installed" tab and click "Apply and restart UI" (if you have any other Roop-based extension enabled - disable it before restart, otherwise this extension won't work)
4. Enjoy!

• Very fast and accurate face replacement (face swap) in images
• Multiple faces support
• Gender detection
• Ability to save original images (made before swapping)
• Face restoration of a swapped face
• Upscaling of a resulting image
• Ability to set the Postprocessing order
• 100% compatibility with different SD WebUIs: Automatic1111, SD.Next, Cagliostro Colab UI
• Super fast performance with NVIDIA GPU (for other platforms please use another version of ReActor)
• API support: both SD WebUI built-in and external (via POST/GET requests)
• ComfyUI support
• Console log level control
• NSFW filter free (this extension is aimed at highly developed intellectual people, not at perverts; our society must be oriented on its way towards the highest standards, not the lowest - this is the essence of development and evolution; so, my position is - that mature-minded people are clever enough to understand for themselves what is good and what is bad and take full responsibility for personal actions; for others - no "filters" will help until they do understand how Universe works)

Using this software you are agree with disclaimer

1. Under "ReActor Force" drop-down menu, import an image containing a face;
2. Turn on the "Enable" checkbox;
3. That's it, now the generated result will have the face you selected.

ReActor detects faces in images in the following order:
left->right, top->bottom

And if you need to specify faces, you can set indexes for source and input images.

Index of the first detected face is 0.

You can set indexes in the order you need.
E.g.: 0,1,2 (for Source); 1,0,2 (for Input).
This means: the second Input face (index = 1) will be swapped by the first Source face (index = 0) and so on.

You can specify the gender to detect in images.
ReActor will swap a face only if it meets the given condition.

Use the "Restore Face" option. You can also try the "Upscaler" option or for more finer control, use an upscaler from the "Extras" tab. You can also set the postproduction order (from 0.1.0 version):

The old logic was the opposite (Upscale -> then Restore), resulting in worse face quality (and big texture differences) after upscaling.

Select the face numbers you wish to swap using the "Comma separated face number(s)" option for swap-source and result images. You can use different index order.

This means NSFW filter detected that your image is NSFW.

You can choose to activate the swap on the source image or on the generated image, or on both using the checkboxes. Activating on source image allows you to start from a given base and apply the diffusion process to it.

ReActor works with Inpainting - but only the masked part will be swapped.
Please use with the "Only masked" option for "Inpaint area" if you enabled "Upscaler". Otherwise use the upscale option via the Extras tab or via the Script loader (below the screen) with "SD upscale" or "Ultimate SD upscale".

You can use ReActor with the built-in Webui API or via an external API.

Please follow this page for the detailed instruction.

Please, check the path where "inswapper_128.onnx" model is stored. It must be inside the folder stable-diffusion-webui\models\insightface. Move the model there if it's stored in a different directory.

(for Mac M1/M2 users) If you get errors when trying to install Insightface - please read Gourieff/sd-webui-reactor#42 and use another version of ReActor

(for Windows Users) If you have VS C++ Build Tools or MS VS 2022 installed but still have a problem, then try the next step:

1. Close (stop) your SD WebUI Server and start it again

(for Any OS Users) If the problem still there, then do the following:

1. Close (stop) your SD WebUI Server if it's running
2. Go to (Windows)venv\Lib\site-packages folder or (MacOS/Linux)venv/lib/python3.10/site-packages
3. If you see any folders with names start from ~ (e.g. "~rotobuf") - delete them
4. Go to (Windows)venv\Scripts or (MacOS/Linux)venv/bin
5. Run Terminal or Console (cmd) for that folder and type activate
6. Update your pip at first: pip install -U pip
7. Then one-by-one:
   • pip install insightface==0.7.3
   • pip install onnx
   • pip install onnxruntime-gpu==1.15.1
   • pip install opencv-python
   • pip install tqdm
8. Type deactivate, you can close your Terminal or Console and start your SD WebUI, ReActor should start OK - if not, welcome to the Issues section.

First of all - you need to disable any other Roop-based extensions:

• Go to 'Extensions -> Installed' tab and uncheck any Roop-based extensions except this one
• Click 'Apply and restart UI'

You need to disable the "SD-CN-Animation" extension (or perhaps some another that causes the conflict)

This error may occur if there's smth wrong with the model file inswapper_128.onnx

Try to download it manually from here and put it to the stable-diffusion-webui\models\insightface replacing existing one

1. Close (stop) your SD WebUI Server if it's running
2. Go to the (Windows)venv\Lib\site-packages or (MacOS/Linux)venv/lib/python3.10/site-packages and see if there are any folders with names start from "~" (for example "~rotobuf"), delete them
3. Go to the "google" folder (inside the "site-packages") and delete any folders there with names start from "~"
4. Go to the (Windows)venv\Scripts or (MacOS/Linux)venv/bin run Terminal or Console (cmd) there and type activate
5. Then:

• python -m pip install -U pip
• pip uninstall protobuf
• pip install protobuf>=3.20.3

If this method doesn't help - there is some other extension that has a wrong version of protobuf dependence and SD WebUI installs it on a startup requirements check

1. Close (stop) your SD WebUI Server if it's running
2. Download and put prebuilt Insightface package into the stable-diffusion-webui (or SD.Next) root folder (where you have "webui-user.bat" file)
3. From stable-diffusion-webui (or SD.Next) root folder run CMD and .\venv\Scripts\activate
4. Then update your PIP: python -m pip install -U pip
5. Then install Insightface: pip install insightface-0.7.3-cp310-cp310-win_amd64.whl
6. Enjoy!

A good and quick way to check for Extensions updates: https://github.com/Gourieff/sd-webui-extensions-updater

You can use ReActor with ComfyUI.
For the installation instruction follow the ReActor Node repo

This software is meant to be a productive contribution to the rapidly growing AI-generated media industry. It will help artists with tasks such as animating a custom character or using the character as a model for clothing etc.

The developers of this software are aware of its possible unethical applicaitons and are committed to take preventative measures against them. We will continue to develop this project in the positive direction while adhering to law and ethics.

Users of this software are expected to use this software responsibly while abiding the local law. If face of a real person is being used, users are suggested to get consent from the concerned person and clearly mention that it is a deepfake when posting content online. Developers and Contributors of this software are not responsible for actions of end-users.

By using this extension you are agree not to create any content that:

• violates any laws;
• causes any harm to a person or persons;
• propogates (spreads) any information (both public or personal) or images (both public or personal) which could be meant for harm;
• spreads misinformation;
• targets vulnerable groups of people.