Myxa ESC issues about sapog HOT 5 CLOSED

Myxas are not running Sapog. What ESCs do you exactly have?

from sapog.

Mixas

from sapog.

@RomanBapst

from sapog.

This is a video of what it does during the takeoff. Ther throttle only respond in the stabilized mode.
https://www.youtube.com/watch?v=DRjNlU9GyF0

from sapog.

@Avysuarez according to the screenshot posted above, Myxas are configured in the RPM control mode, but the RPM PID controller is not tuned (I see the default settings, which are quite conservative and are not suitable for flying). You should read the quick-start guide you've been referred to earlier; specifically, look at the section Using Myxa in multirotor aircraft. Currently, we recommend using the voltage control mode for multirotors; to use it, set the configuration parameter uavcan.rcm or rcpwm.ctl_mode (depending on which interface you're using now) to 2.

I am closing this ticket because it has no relation to Sapog. If you have any further questions about Myxa, please, consider posting them at forum.zubax.com. Thanks!

from sapog.