Clips for SWD programming/debugging. Easy to modify for your needs.
ย | Name | Comment |
---|---|---|
1 | PCB | Modify if needed |
2 | Pogo pin P50-F1 | For 1.27mm step. Alt: P50-LM2. |
3 | Pogo pin P75-E2 | For 2.54mm step. Alt: P75-E2, P75-LM2. |
4 | Spring | 0.6*6*20mm or 0.7*6*15mm should be ok. |
5 | 2.54mm pins | |
6 | M2 12mm screws | DIN 7985 / ISO 7045. PCB mount. |
7 | M2 14mm screws | DIN 7985 / ISO 7045. Join plastic parts. |
8 | M2 spring lock washes | |
9 | M2 nuts | |
10 | 0.9mm needles | Only for TC2030 clip. Stainless steel wire should be ok too. |
11 | 3d-printed clip parts | See 3dprint folder |
Order plastic parts at jlcpcb, with the PCB-s: https://cart.jlcpcb.com/quote?businessType=tdpGoodsFile. Select SLA process and LEDE 6060 material.
First, mount PCB-s and solder pogo pins. Put top PCB on the table to align all pins and solder from the bottom side.
Then detach PCB-s, mount connector & wash flux off.
Now assemble everything and install spring.
You can order alternate clips at AliExpress, or use those as base for custom PCB-s.