pulsartronic / lorawangatewaysc Goto Github PK

For some reason, my RFM initialises for 1 second and the goes to Stoped but then doesn't come out of stoped.
Also my Wifi settings don't save. i have to re-enter and connect each time there is a power cycle.

I can not change sf, it always stands on 7.? If I change it via the web page, the text changes to bold, if you press save, the text usually changes back to normal. It does not for SF and TX power.?

Some ideas.?

I can receive package on SF7, but would like to go on SF10. :)

Thanks for you. this is only gateway, do you have the client node code?

Hi

I have 2 gateways, one that uses the ESP8266 library v3.0.2 and another using v2.7.4 and none of them are able to connect.
The RFM is initialized and WiFi is up and running.

I have created 2 gateways using the console (https://eu1.cloud.thethings.network/console/gateways) and I am 100% sure that the ID's are correct. The port is not changed so it should be ok (1700).
The status is continuously "Disconnected" for both.

I see no error output in the "Wan Server connection console log" so I have no idea about what is wrong.
The gateways are seeing packages and seems to forward them.

Best regards, Brian

Hi, please correct this->wifi->client->settings.password to this->wifi->client->settings.pass otherwise your code won't compile. It's a small issue but wanted to report that.

Thanks!

Found this error when complie.
C:\Users\sx\Documents\Arduino2\libraries\arduinoWebSockets-master\src\WebSocketsClient.cpp: In member function 'void WebSocketsClient::loop()':
C:\Users\sx\Documents\Arduino2\libraries\arduinoWebSockets-master\src\WebSocketsClient.cpp:172:30: error: 'class BearSSL::WiFiClientSecure' has no member named 'setCACert'
172 | _client.ssl->setCACert((const uint8_t *)_CA_cert, strlen(_CA_cert) + 1);
| ^~~~~~~~~
C:\Users\sx\Documents\Arduino2\libraries\arduinoWebSockets-master\src\WebSocketsClient.cpp: In member function 'void WebSocketsClient::connectedCb()':
C:\Users\sx\Documents\Arduino2\libraries\arduinoWebSockets-master\src\WebSocketsClient.cpp:759:26: error: 'class BearSSL::WiFiClientSecure' has no member named 'verify'
759 | if(!_client.ssl->verify(_fingerprint.c_str(), _host.c_str())) {

I have successfully compiled and uploaded the code to WeMos d1 board.
I have got this on serial monitor.
Starting WAN system ... OK
Strating LoRa module : OK
After connecting to the access point I have tried to access the web interface on http://192.168.4.1/ (by default) found from the writeup and it not woked.
I have tried to getaway Ip on ipconfig I got empty field on default gateway.
I don't know to continue please help me.

I get an error while compiling. It says that NetworkNode.h no such file or directory. I can't find anything like this in the built in libraries nor during an online search. Could you identify the library please?

I try to compile the code, according to this guide
https://www.hackster.io/pulsartronic/lorawan-gateway-esp8266-rfm95-arduino-4914a8

There is an exit error when I compile it.
Using library WAN in folder: C:\Users\user\Documents\Arduino\LoRaWANGatewaySC-master\libraries\WAN (legacy) Using library DataStructure in folder: C:\Users\user\Documents\Arduino\LoRaWANGatewaySC-master\libraries\DataStructure (legacy) Using library Hash at version 1.0 in folder: C:\Users\user\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.7.1\libraries\Hash exit status 1 Error compiling for board LOLIN(WEMOS) D1 R2 & mini.

I use Arduino IDE 1.8.10

Any suggestion ?

Regards