load mpt2sas/mpt3sas failure about rp-ext HOT 1 CLOSED

Is it DS918+ log?
Below is the log of my JUN loader 1.04b 6.2.3 (ext. 0.12.1).
It was confirmed that the driver versions were the same as 09.102.00.

[ 0.000000] Preemptible hierarchical RCU implementation.
[ 2.752541] mptctl: Registered with Fusion MPT base driver
[ 2.752543] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 2.775476] mpt3sas version 09.102.00.00 loaded
[ 2.775604] mpt3sas 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.778305] mpt2sas_cm0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (8006160 kB)
[ 2.833429] mpt2sas_cm0: MSI-X vectors supported: 1, no of cores: 4, max_msix_vectors: -1
[ 2.833478] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 27
[ 2.833480] mpt2sas_cm0: iomem(0x00000000f7940000), mapped(0xffffc90000260000), size(65536)
[ 2.833481] mpt2sas_cm0: ioport(0x000000000000e000), size(256)
[ 2.927287] mpt2sas_cm0: Allocated physical memory: size(7445 kB)
[ 2.927289] mpt2sas_cm0: Current Controller Queue Depth(3307),Max Controller Queue Depth(3432)
[ 2.927290] mpt2sas_cm0: Scatter Gather Elements per IO(128)
[ 2.972833] mpt2sas_cm0: LSISAS2008: FWVersion(20.00.07.00), ChipRevision(0x03), BiosVersion(07.39.02.00)
[ 2.972835] mpt2sas_cm0: Protocol=(
[ 2.973118] mpt2sas_cm0: sending port enable !!
[ 3.125122] Got empty serial number. Generate serial number from product.
[ 4.483107] mpt2sas_cm0: host_add: handle(0x0001), sas_addr(0xyyyyyyyyyyyyyyy), phys(8)
[ 10.364543] mpt2sas_cm0: port enable: SUCCESS
[ 19.619685] mpt2sas_cm0: log_info(0x31120434): originator(PL), code(0x12), sub_code(0x0434)
[ 78.986452] Got empty serial number. Generate serial number from product.
[ 79.003451] Got empty serial number. Generate serial number from product.

from rp-ext.