photonsters / resin-exposure-finder-v2 Goto Github PK

Looking for V2 exposure .CTB for EPAX E6 and E10

Hi

I have a PeoPoly Phenom NOIR and was looking for a version to use. I thought the one you had would work as the resolution was close but evidently not.

The specs I took from Chitubox which were the ones Peopoly gave out on the NOIR are:
Resolution: X=3840 pixel by Y=2160 pixel
Build plate size is 239.76mm*165.24mm
LCD_Mirror

Not sure if that's enough? Please let me know.

I use solidworks and fusion so if I can help out with that or even documentation I would be glad to lend a hand. I am a newb resin guy so this is a bit of a learning curve but I keep seeing the same questions over and over so maybe something from that perspective might help? I also write tech publications for aerospace and medical engineering as part of what I do (bio-med engineer) so bashing out a howto isn't a biggie.

If you don't need any help just want to say thanks for doing this anyway! I did try to PM to offer but brain melted lol

Cheers

Dave
Canada

Would it be possible to get files generated for 10, 25 and 50um that would be compatible with the phrozen sonic 4k see : https://phrozen3d.com/products/sonic-4k-3d-printer-phrozen#description

Standard 5.5" Photon size, 1080x1920 resolution.
https://chitusystems.com/product/fhd-5-5-mono-lcd-for-elegoo-mars-elegoo-mars-pro/

NB: With the standard UC from the Photon OG it may need a slightly higher exposure range than most mono printers.

Can you make a file for the sonic mini 4k?
Resolution: 3840 x 2160

Hello all,
I use the resin exposure finder on a phrozen mini 4k.
Between the different exposure times the light goes completly off.
So the exposure for the longer times are not continously it goes in steps of 0.5s with an off time between the steps.

Can this be fixed so that there is no off time between the steps?

Hi all, I have access to a Phenom Noir and would love to run the resin exposure V2.

Chitubox shows it at 3840 x 2160px Monochrome, which I couldn't see a file for.

We have also upgraded the firmware (v2.9) so it now accepts ".ctb" file format
The previous firmware (v2.8) uses ".cbddlp"

Is any other information required to help?

I'm not asking for extensive docs, but it would be very helpful to have a description of what this does, how it does it, and how to use it.

I got here from a web page describing one file to download and a manual calibration process, but there seems to be more than than here. What is it?

I did not see a Chitubox compatible file for 1620*2560.

Official Link: https://www.creality.com/goods-detail/creality-ld-002h-resin-3d-printer

Hey All!
First of all, thanks a lot for providing this! It's incredibly useful to dial in every resin in very little time with very little resin wasted! This should really be included with every printer from factory.

Unfortunately with my mars pro, the first run went perfectly fine. On the second run though, it seems the settings are not resetting. Prints turn out fine, however take even longer because accerleration is still at minimum. I've tried running the print mode gcode multiple times and restart the printer including turning it off for more than 10 minutes.

Any idea what else I could try?

1620*2560

Hello, would it be possible to add version for CREALITY LD-002H? probably 2-3s with 0.1s steps

Or maybe it would be easier to explain the file format, because I could find it anywhere :(
If I would know the format I could most probably create it myself.

Nothing with a resolution like my printer was listed so I'm sending this per instruction on the page.

As spoken on FB. (Timings caused by greyscale)

ResinXP2-ValidationMatrix_200627-deprecated.stl_PhrozenShuffle4k_01-07-2020.zip
this is the sliced file in Formware with 0.03 layer height.

Your file with zip extension isn`t compatible.
BETA-xp2_CTB_3840-2400__050um_2-20s.zip

I've just tried running the calibration on a mars 2 pro mono and when running the printer says: "The resolution does not match (1440p)". I've been trying to run BETA-xp2_CTB_1440x2560__050um_0.5-5s.zip

7680x4320

With instructions on how to vary PWM?

TIA

Hi could you please add an exposure finder 0.5 to 5s for Elegoo MARS, or highlight which files to use.