Comments (15)
X3msnake
commented on June 20, 2024
You are building a better led array?
No dia quinta-feira, 1 de novembro de 2018, esseeayen <
[email protected]> escreveu:
… I found this group and have a similar DLP printer, the wanhao d7, which we
have been upgrading but someone mentioned that some of our upgrades may
also be useful for the Photon. Is there any chance you can take some
pictures and measurements of the space and holes for the reflector for the
UV led?
Thanks!
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub
<#12>, or mute
the thread
<https://github.com/notifications/unsubscribe-auth/AKke-g7d32_14W1T87bWmYKUwD0WRRuTks5uqn4zgaJpZM4YFx_O>
.
--
Com os melhores cumprimentos,
Vinicius Silva
from anycubic-photon-docs.
esseeayen
commented on June 20, 2024
Hopefully! I that's the idea.
from anycubic-photon-docs.
bartwaw
commented on June 20, 2024
i'm thinking about this also. But i will do it on orbeat printer which has same board.
Ordered such pcb
https://www.aliexpress.com/item/free-shipping-1pce-12W-18W-20W-24W-30W-36W-48W-Rectangle-LED-Aluminum-Plate-High-Power/32722702900.html?spm=a2g0s.13010208.99999999.310.19203c00KrRbBi
which will cover whole LCD ( its 145x106 but i think that whole pcb dimension)
and 20 pcs 3W leds 405nm so they should give 60W.
But i will drive them little bit lower to get about 50w.
One thing is missing on chituboards - there is no way to do own mask like in nanodlp.
from anycubic-photon-docs.
X3msnake
commented on June 20, 2024
beware that driving the leds at lower voltage may dift the led wavelenght.
what dimensions do you need?
Photon is much the same as orbeat, hardware wise so i would not be
surprised if the dimenstions are intermutable
bartwaw <[email protected]> escreveu no dia sábado, 3/11/2018 à(s)
15:03:
… i'm thinking about this also. But i will do it on orbeat printer.
Ordered such pcb
https://www.aliexpress.com/item/free-shipping-1pce-12W-18W-20W-24W-30W-36W-48W-Rectangle-LED-Aluminum-Plate-High-Power/32722702900.html?spm=a2g0s.13010208.99999999.310.19203c00KrRbBi
which will cover whole LCD ( its 145x106 but i think that whole pcb
dimension)
and 20 pcs 3W leds 405nm so they should give 60W.
But i will drive them little bit lower to get about 50w.
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#12 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/AKke-oLJnNBdvTu2s4wB7NHrI7naB-Jtks5urbBJgaJpZM4YFx_O>
.
--
Com os melhores cumprimentos,
Vinicius Silva
from anycubic-photon-docs.
esseeayen
commented on June 20, 2024
@bartwaw agreed, this is the reason why we were making one for the Wanhao D7, but we have done a lot of research and not just any "UV led" will do, even if it says 405nm.
@X3msnake i have attached the dimensions i need. It would be amazing if they were the same size 👍
Thanks in advance for your help.
from anycubic-photon-docs.
esseeayen
commented on June 20, 2024
This was our version 1 which didn't work well, but we're onto trying something new!
from anycubic-photon-docs.
bartwaw
commented on June 20, 2024
esseeayen i see that you used 5050 led's.
I've read somewhere that isn't best option.
I think that main problem is that they are almost 180 degrees.
That's why i'm thinking about such leds
best way is to find good leds with 60 degree beam like them:
https://www.aliexpress.com/item/10PCS-Imitation-cree-led-3535-UV-LED-365nm-370nm-380nm-385nm-395nm-400nm-405nm-3W-Purple/32893869506.html?spm=2114.search0104.3.1.62c52a70TXswZq&ws_ab_test=searchweb0_0,searchweb201602_4_10065_10068_319_317_5728817_10696_10084_10083_5729417_10618_10304_10307_10820_10301_10821_5730517_5733317_5733217_10843_5733417_328_10059_10884_5732917_10887_100031_5733117_321_322_10103_5733517_5733617,searchweb201603_55,ppcSwitch_0&algo_expid=fc3b6d59-3471-4239-bab2-ecec3bd98c87-0&algo_pvid=fc3b6d59-3471-4239-bab2-ecec3bd98c87
but i didn't found aluminium PCB's that have dimensions over 120x60
anyway i'm thinking about simillar to this:
https://www.fepshop.com/shop/parts/led/paraled-3rd-party-kit/
from anycubic-photon-docs.
esseeayen
commented on June 20, 2024
@bartwaw 5050 Leds beam spread wasn't the angle that was the issue. It's actually the lumens/watt that is the issue.
We have a solution now, but we are custom making the PCB and everything to make sure it works properly.
I know the people from FEP Shop and they said the paraled is good, but they seem to be no longer available as a DIY part, as well as being >$200!
from anycubic-photon-docs.
bartwaw
commented on June 20, 2024
so what leds will you use ?
from anycubic-photon-docs.
esseeayen
commented on June 20, 2024
1W Cree-style LEDs
ᐧ
…On Sun, 4 Nov 2018 at 21:44, bartwaw ***@***.***> wrote:
so what leds will you use ?
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#12 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/AIKEEkHGwgDNsRurG0EZ23a0iN5NMf_3ks5ursUigaJpZM4YFx_O>
.
from anycubic-photon-docs.
bartwaw
commented on June 20, 2024
any more :) what type
from anycubic-photon-docs.
esseeayen
commented on June 20, 2024
you'll see :)
ᐧ
…On Sun, 4 Nov 2018 at 22:36, bartwaw ***@***.***> wrote:
any more :) what type
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#12 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/AIKEEma3xpjbQ-CZtYrOyPnzpeKgTy85ks5urtFGgaJpZM4YFx_O>
.
from anycubic-photon-docs.
esseeayen
commented on June 20, 2024
If anyone is happy to measure, happy to provide a board for testing (free, but just pay the shipping)
from anycubic-photon-docs.
bartwaw
commented on June 20, 2024
sadly i have Orbeat D100
from anycubic-photon-docs.
madeintaiwan
commented on June 20, 2024
@esseeayen Did you manage to produce upgraded LED units?
from anycubic-photon-docs.
Related Issues (20)
- How to connect wifi? HOT 1
- LCD screen flickering HOT 2
- Printed Circuit Board with a Anycubic Photon HOT 1
- UI personal Mod HOT 2
- LCD screen not functioning HOT 3
- FAQ request - curing HOT 2
- Off-time HOT 4
- Broken link in the FAQ
- Turning off touchscreen HOT 1
- Photon Workshop 2.1.23RC8 - Crashes often but not always when opening scene file HOT 1
- Photon Workshop 2.1.23RC8 - Can't drag windo higher than top boundary of primary monitor HOT 1
- MonoX (Mono-x) raise height after job complete is very low HOT 1
- Is there a way to level without touchscreen? HOT 2
- Downgrade from .19 to .18 issue HOT 1
- RERF files...
- #IWantToHelp - Anycubic Photon Firmware <-> Chitubox slicer setting correlation experiment
- Wrong photon test file link
- USB read issues HOT 5
- Anycubic Photon S UART Serial Connect Support via RP Pi Zero --> Need Support HOT 4
- #HelpMeHelpYouHelpUsAll HOT 2
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from anycubic-photon-docs.