The repository hosts Pastel Chain releases.

It also contains hassle-free guides and scripts for getting started and managing Pastel Chain clients.

Pastel Daemon version: v2.2.1-unk
pasteld Hash (sha256sum pasteld) b352f3075a8b1ecbf7694d66fe82a654fc5ea8a2577b901f9ccb320c27e736bd

Supernode version: v2.2.0
Supernode service Hash (sha256sum supernode-linux-amd64) 9d12b76c8f9ecb04c8557e3447cf2e4f01d50c312f32ec469e6f57213092ee9b

Hermes version: v2.2.0
Hermes service Hash (sha256sum hermes-linux-amd64) 6bd97e7786e64047f6bf6b8a41176950ff36dd29d649c85fe674f17c5a538eec

• All required release files can be found here
• pastelup
• paslel-core
• goNode
• dd-service
• rq-service

The following requirements are required to run the node natively.

The following table shows the recommended hardware requirements for the running node on the mainnet.

• Ubuntu 22.04 Required for running a SuperNode (Note: Full Node and WalletNode clients compatible on MacOS, Windows, and Linux)

NOTE: Install guides for various client types can be found here - https://github.com/pastelnetwork/pastelup

NOTE: Upgrade guides for various client types can be found below.

  # navigate to where pasteld binary is located:
  ./pastel-cli stop
  mv pasteld pasteld-2.0
  mv pastel-cli pastel-cli-2.0
  wget https://download.pastel.network/latest-release/mainnet/pasteld/pastel-linux-amd64.zip
  unzip pastel-linux-amd64.zip
  sudo chmod +x pasteld
  sudo chmod +x pastel-cli
  mv ~/.pastel/blocks ~/.pastel/blocks-2.0
  mv ~/.pastel/chainstate ~/.pastel/chainstate-2.0
  ./pasteld -rescan -reindex -txindex=1

1.a Download pastelup to Wallet host

• https://download.pastel.network/#latest-release/pastelup/ 1.b Update existing pastelup
• ./pastelup-linux-amd64 update pastelup

2. Stop pastel software

./pastelup-darwin-amd64 stop walletnode

2. Run the update command

./pastelup-darwin-amd64 update walletnode

• The above command will update the following applications:
  • pasteld
  • pastel-cli
  • rq-server
  • walletnode

3. Start all services

./pastelup-darwin-amd64 start walletnode

NOTE: SuperNode Update assumes that:

• REMOTE host has:
  • pastel node (pasteld and pastel-cli) running as masternode,
  • wallet with collateral transaction for SN(s)
  • masternode.conf for SN(s)
  • All other services: supernode, rq-service, dd-service, hermes
• OPTIONAL: LOCAL host - the user's computer used for performing upgrade

1.a Download pastelup to LOCAL host (we assume that node doesn't have pastel application installed)

• https://download.pastel.network/#latest-release/pastelup/ 1.b Update existing pastelup
• ./pastelup-linux-amd64 update pastelup

2. Stop pastel software on REMOTE host by running the following command from LOCAL node

./pastelup-darwin-amd64 stop supernode remote --ssh-ip <IP address of REMOTE node> --ssh-user <ssh user of REMOTE node> --ssh-key <path to the key of REMOTE node user>

3. Update REMOTE node by running the following command from LOCAL node:

./pastelup-darwin-amd64 update supernode remote --ssh-ip <IP address of REMOTE node> --ssh-user <ssh user of REMOTE node> --ssh-key <path to the key of REMOTE node user>

• The above command will update the following applications:
  • pasteld
  • pastel-cli
  • rq-server
  • hermes
  • supernode
  • dd-service

4. Start all services by running the following command from LOCAL node:
5. Start Supernode on HOT node: shell ./pastelup-darwin-amd64 start supernode remote --ssh-ip <IP address of HOT node> --ssh-user <ssh user of HOT node> --ssh-key <path to the key of HOT node user>

1.a Download pastelup to REMOTE nodes

• https://download.pastel.network/#latest-release/pastelup/ 1.b Update existing pastelup
• ./pastelup-linux-amd64 update pastelup

2. Stop pastel software on REMOTE host by running the following command from REMOTE node itself:

./pastelup-darwin-amd64 stop supernode

3. Update REMOTE node by running the following command from REMOTE node itself:

./pastelup-darwin-amd64 update supernode

• The above command will update the following applications:
  • pasteld
  • pastel-cli
  • rq-server
  • hermes
  • supernode
  • dd-service

4. Start all services by running the following command from REMOTE node itself:

./pastelup-darwin-amd64 start supernode

NOTE: SuperNode Update assumes that SuperNode is established via a COLD/HOT mode set-up where:

• COLD node has:
  • pastel node (pasteld and pastel-cli) set as simple node (not as masternode),
  • wallet with collateral transaction for SN(s) that ran on HOT node(s)
  • masternode.conf for SN(s) that ran on HOT node(s)
• HOT node has:
  • pastel node (pasteld and pastel-cli) running as masternode
  • All other services: supernode, rq-service, dd-service, hermes
• OPTIONAL: LOCAL host - the user's computer used for performing upgrade, this CAN be the COLD node

1.a Download pastelup to LOCAL node (we assume that node doesn't have pastel application installed)

• https://download.pastel.network/#latest-release/pastelup/ 1.b Update existing pastelup
• ./pastelup-linux-amd64 update pastelup

2. Stop pastel software on COLD node by running the following command from LOCAL node

./pastelup-darwin-amd64 stop node remote --ssh-ip <IP address of LOCAL node> --ssh-user <ssh user of LOCAL node> --ssh-key <path to the key of LOCAL node user>

3. Update COLD node by running the following command from LOCAL node

./pastelup-darwin-amd64 update node remote --ssh-ip <IP address of HOT node> --ssh-user <ssh user of HOT node> --ssh-key <path to the key of HOT node user>

• The above command will update the following applications:
  • pasteld
  • pastel-cli

4. Stop pastel software on HOT host by running the following command from LOCAL node

./pastelup-darwin-amd64 stop supernode remote --ssh-ip <IP address of HOT node> --ssh-user <ssh user of HOT node> --ssh-key <path to the key of HOT node user>

3. Update HOT node by running the following command from LOCAL node:

./pastelup-darwin-amd64 update supernode remote --ssh-ip <IP address of HOT node> --ssh-user <ssh user of HOT node> --ssh-key <path to the key of HOT node user>

• The above command will update the following applications:
  • pasteld
  • pastel-cli
  • rq-server
  • hermes
  • supernode
  • dd-service

4. Start all services by running the following command from LOCAL node:
5. Start Supernode on HOT node: shell ./pastelup-darwin-amd64 start supernode remote --ssh-ip <IP address of HOT node> --ssh-user <ssh user of HOT node> --ssh-key <path to the key of HOT node user>
6. NOTE: In MOST cases you don't need to start pastel application on COLD node after upgrade!!!

1.a Download pastelup to COLD node

• https://download.pastel.network/#latest-release/pastelup/ 1.b Update existing pastelup
• ./pastelup-linux-amd64 update pastelup

2. Stop pastel software on COLD node by running the following command from COLD node itself:

./pastelup-darwin-amd64 stop node

3. Update COLD itself node by running the following command from COLD node itself:

./pastelup-darwin-amd64 update node

• The above command will update the following applications:
  • pasteld
  • pastel-cli

4. Stop pastel software on HOT host by running the following command from COLD node

./pastelup-darwin-amd64 stop supernode remote --ssh-ip <IP address of HOT node> --ssh-user <ssh user of HOT node> --ssh-key <path to the key of HOT node user>

5. Update HOT node by running the following command from COLD node:

./pastelup-darwin-amd64 update supernode remote --ssh-ip <IP address of HOT node> --ssh-user <ssh user of HOT node> --ssh-key <path to the key of HOT node user>

• The above command will update the following applications:
  • pasteld
  • pastel-cli
  • rq-server
  • hermes
  • supernode
  • dd-service

6. Start all services by running the following command from COLD node:
7. Start Supernode on HOT node: shell ./pastelup-darwin-amd64 start supernode remote --ssh-ip <IP address of HOT node> --ssh-user <ssh user of HOT node> --ssh-key <path to the key of HOT node user>
8. NOTE: In MOST cases you don't need to start pastel application on COLD node after upgrade!!!

1.a Download pastelup to COLD and HOT nodes

• https://download.pastel.network/#latest-release/pastelup/ 1.b Update existing pastelup
• ./pastelup-linux-amd64 update pastelup

2. Stop pastel software on COLD node by running the following command from COLD node itself:

./pastelup-darwin-amd64 stop node

3. Update COLD node by running the following command from COLD node itself:

./pastelup-darwin-amd64 update node

• The above command will update the following applications:
  • pasteld
  • pastel-cli

2. Stop pastel software on HOT host by running the following command from HOT node itself:

./pastelup-darwin-amd64 stop supernode

3. Update HOT node by running the following command from HOT node itself:

./pastelup-darwin-amd64 update supernode

• The above command will update the following applications:
  • pasteld
  • pastel-cli
  • rq-server
  • hermes
  • supernode
  • dd-service

4. Start all services by running the following command:
5. Start Supernode on HOT node: shell ./pastelup-darwin-amd64 start supernode
6. NOTE: In MOST cases you don't need to start pastel application on COLD node after upgrade!!!