Project description
Lab description
demo description
Building blocks description
Instructions to prepare the setup
Clone this repository
Install Docker
Instanciate a Gitlab docker container
Configure Gitlab
Install SaltStack
Install master
Install Minion
Install requirements for SaltStack Junos proxy
Install the junos syslog engine dependencies
Configure your setup
Configure SaltStack master
Configure SaltStack minion
Configure SaltStack pillars
Configure SaltStack proxy
Configure SaltStack files server
Configure SaltStack junos syslog engine
Configure SaltStack reactor
Configure Junos devices to send commit messages to salt master
Familiarize yourself with this setup
Run the demo
At each junos commit, SaltStack automatically collects the new junos configuration file and archives it to a git server
This is a relatively simple demo. For a more advanced, robust, scalable, distributed and automated equivalent demo, please visit the repository https://github.com/ksator/automation_summit_Q3_2018
Building blocks:
- Junos (one vMX)
- Ubuntu (one host) with:
- SaltStack
- Docker
- Gitlab
hostname | Management IP address | Management interface | Operating system | Version |
---|---|---|---|---|
ubuntu | 100.123.35.1 | eth0 | ubuntu | 16.04 |
vMX-1 | 100.123.1.1 | me0 | Junos | 17.4R1-S2.2 |
At each junos commit, SaltStack automatically collects the new junos configuration file and archives it to a git server:
- When a Junos commit is completed, the Junos device send a syslog message
UI_COMMIT_COMPLETED
. - The junos device is configured to send this syslog message to SaltStack.
- Each time SaltStack receives this syslog message, SaltStack automatically collects the new junos configuration file from the Junos device that sent this commit syslog message, and SaltStack automatically archives the new Junos configuration file to a git server
Here's a more detailled description of this demo
- There is one single Junos device
- The hostname is
vMX-1
- It is configured to send the syslog message
UI_COMMIT_COMPLETED
to SaltStack when a commit is completed
- This demo uses these SaltStack components: A master, a minion, a proxy, the junos_syslog engine.
- All in one SaltStack setup: all the above components runs on the same Ubuntu host.
- The Salt master listens to syslog messages sent by junos devices
- The Salt master generates a ZMQ messages to the event bus when a junos syslog message is received. The ZMQ message has a tag and data. The data structure is a dictionary, which contains information about the event.
- The Salt reactor binds sls files to event tags. The reactor has a list of event tags to be matched, and each event tag has a list of reactor SLS files to be run. So these sls files define the SaltStack reactions.
- The sls reactor file used in this content does the following: it parses the data from the ZMQ message to extract the network device name. It then ask to the proxy that manages the device to execute an sls file.
- The sls file executed by the proxy collects the new junos configuration and archives the collected data to a git server
- This SaltStack setup uses the gitlab server for external pillars (variables)
- This SaltStack setup uses the gitlab server as a remote file server (templates, sls files, ...).
- The Junos configuration is automatically saved on the Gitlab server
- There is one single Ubuntu host
- It has SaltStack installed: all the SaltStack components described above are installed on the same Ubuntu host.
- It has Docker installed. Gitlab is a container instanciated on this host.
- Clone this repository
- Install Docker
- Instanciate a Gitlab docker container
- Configure Gitlab
- Install SaltStack
- Configure SaltStack
- Configure Junos
$ sudo -s
# cd
# git clone https://github.com/ksator/automated_junos_configuration_backup_on_git_with_syslog_saltstack.git
# ls automated_junos_configuration_backup_on_git_with_syslog_saltstack
Check if Docker is already installed
$ docker --version
If it was not already installed, install it:
$ sudo apt-get update
$ sudo apt-get install \
apt-transport-https \
ca-certificates \
curl \
software-properties-common
$ curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -
$ sudo add-apt-repository \
"deb [arch=amd64] https://download.docker.com/linux/ubuntu \
$(lsb_release -cs) \
stable"
$ sudo apt-get update
$ sudo apt-get install docker-ce
$ sudo docker run hello-world
$ sudo groupadd docker
$ sudo usermod -aG docker $USER
Exit the ssh session and open an new ssh session and run these commands to verify you installed Docker properly:
$ docker run hello-world
Hello from Docker!
This message shows that your installation appears to be working correctly.
To generate this message, Docker took the following steps:
1. The Docker client contacted the Docker daemon.
2. The Docker daemon pulled the "hello-world" image from the Docker Hub.
(amd64)
3. The Docker daemon created a new container from that image which runs the
executable that produces the output you are currently reading.
4. The Docker daemon streamed that output to the Docker client, which sent it
to your terminal.
To try something more ambitious, you can run an Ubuntu container with:
$ docker run -it ubuntu bash
Share images, automate workflows, and more with a free Docker ID:
https://hub.docker.com/
For more examples and ideas, visit:
https://docs.docker.com/engine/userguide/
$ docker --version
Docker version 18.03.1-ce, build 9ee9f40
There is a Gitlab docker image available https://hub.docker.com/r/gitlab/gitlab-ce/
Check if you already have it locally:
$ docker images
if not, pull the image:
$ docker pull gitlab/gitlab-ce
Verify:
$ docker images
REPOSITORY TAG IMAGE ID CREATED SIZE
gitlab/gitlab-ce latest 504ada597edc 6 days ago 1.46GB
$ docker run -d --name gitlab -p 3022:22 -p 9080:80 gitlab/gitlab-ce
Verify:
$ docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
eca5b63dcf99 gitlab/gitlab-ce "/assets/wrapper" 26 hours ago Up 26 hours (healthy) 443/tcp, 0.0.0.0:3022->22/tcp, 0.0.0.0:9080->80/tcp gitlab
Wait for Gitlab container status to be healthy
.
It takes about 2 mns.
$ watch -n 10 'docker ps'
Access Gitlab GUI with a browser http://100.123.35.1:9080
Gitlab user is root
Create a password password
Sign in with root
and password
Create the group organization
(Public)
Create these new projects in the group organization
network_parameters
(Public, add Readme)network_model
(Public, add Readme)configuration_backup
(Public, add Readme)
the repository network_parameters
is used for SaltStack external pillars
the repository network_model
is used as an external files server for SaltStack
the repository configuration_backup
is used to backup Junos configuration files
The Ubuntu host will inteact with the Gitlab server.
$ sudo -s
# ssh-keygen -f /root/.ssh/id_rsa -t rsa -N ''
# ls /root/.ssh/
id_rsa id_rsa.pub
Copy the public key:
# more /root/.ssh/id_rsa.pub
Access Gitlab GUI, and add the public key to User Settings
> SSH Keys
$ sudo -s
# touch /root/.ssh/config
# ls /root/.ssh/
config id_rsa id_rsa.pub
# vi /root/.ssh/config
# more /root/.ssh/config
Host 100.123.35.1
Port 3022
Host *
Port 22
$ sudo -s
# git config --global user.email "[email protected]"
# git config --global user.name "Your Name"
Clone all the repositories:
$ sudo -s
# git clone [email protected]:organization/network_parameters.git
# git clone [email protected]:organization/network_model.git
# git clone [email protected]:organization/configuration_backup.git
# ls
# cd network_parameters
# git remote -v
# git branch
# ls
# vi README.md
# git status
# git diff README.md
# git add README.md
# git status
# git commit -m 'first commit'
# git log --oneline
# git log
# git push origin master
# cd
- Install master
- Install minion
- Install requirements for SaltStack Junos proxy
- Install requirements for SaltStack Junos_syslog engine
Check if SaltStack master is already installed
$ sudo -s
# salt --version
# salt-master --version
if SaltStack master was not already installed, then install it:
$ sudo -s
# wget -O - https://repo.saltstack.com/apt/ubuntu/16.04/amd64/archive/2018.3.2/SALTSTACK-GPG-KEY.pub | sudo apt-key add -
Add deb http://repo.saltstack.com/apt/ubuntu/16.04/amd64/archive/2018.3.2 xenial main
in the file /etc/apt/sources.list.d/saltstack.list
# touch /etc/apt/sources.list.d/saltstack.list
# nano /etc/apt/sources.list.d/saltstack.list
# more /etc/apt/sources.list.d/saltstack.list
deb http://repo.saltstack.com/apt/ubuntu/16.04/amd64/archive/2018.3.2 xenial main
# sudo apt-get update
# sudo apt-get install salt-master
Verify you installed properly SaltStack master
# salt --version
salt 2018.3.2 (Oxygen)
# salt-master --version
salt-master 2018.3.2 (Oxygen)
Check if SaltStack minion is already installed on the ubuntu host minion1
# salt-minion --version
if SaltStack minion was not already installed, then install it:
$ sudo -s
# wget -O - https://repo.saltstack.com/apt/ubuntu/16.04/amd64/archive/2018.3.2/SALTSTACK-GPG-KEY.pub | sudo apt-key add -
Add deb http://repo.saltstack.com/apt/ubuntu/16.04/amd64/archive/2018.3.2 xenial main
in the file /etc/apt/sources.list.d/saltstack.list
# touch /etc/apt/sources.list.d/saltstack.list
# nano /etc/apt/sources.list.d/saltstack.list
# more /etc/apt/sources.list.d/saltstack.list
deb http://repo.saltstack.com/apt/ubuntu/16.04/amd64/archive/2018.3.2 xenial main
# sudo apt-get update
$ sudo apt-get install salt-minion
And verify if salt-minion was installed properly installation
# salt-minion --version
salt-minion 2018.3.2 (Oxygen)
The Salt Junos proxy has some requirements (junos-eznc
python library and other dependencies).
# apt-get install python-pip
# pip list
# apt-get --auto-remove --yes remove python-openssl
# pip install pyOpenSSL junos-eznc jxmlease jsnapy
# pip list | grep "pyOpenSSL\|junos-eznc\|jxmlease\|jsnapy"
Verify you can use junos-eznc
# python
Python 2.7.12 (default, Dec 4 2017, 14:50:18)
[GCC 5.4.0 20160609] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> from jnpr.junos import Device
>>> dev=Device(host='100.123.1.1', user="jcluser", password="Juniper!1")
>>> dev.open()
Device(100.123.1.1)
>>> dev.facts['version']
'17.4R1-S2.2'
>>> dev.close()
>>> exit()
Engines are executed in a separate process that is monitored by Salt. If a Salt engine stops, it is restarted automatically.
Engines can run on both master and minion. To start an engine, you need to specify engine information in master/minion config file depending on where you want to run the engine. Once the engine configuration is added, start the master and minion normally. The engine should start along with the salt master/minion.
Junos_syslog engine listens to syslog messages from Junos devices, extracts event information and generates and pusblishes messages on SaltStack 0MQ bus.
# pip install pyparsing twisted
# pip list | grep "pyparsing\|Twisted"
- Configure SaltStack master
- Configure SaltStack minion
- Configure SaltStack pillars
- Configure SaltStack proxy
- Configure SaltStack files server
- Configure SaltStack junos syslog engine
- Configure SaltStack reactor
- Configure Junos
Copy the SaltStack master configuration file in the file /etc/salt/master
# cp automated_junos_configuration_backup_on_git_with_syslog_saltstack/master /etc/salt/master
So:
- the Salt master is listening junos syslog messages on port 516. For each junos syslog message received, it generates an equivalent ZMQ message and publish it to the event bus
- external pillars (variables) are in the gitlab repository
organization/network_parameters
(master branch) - Salt uses the gitlab repository
organization/network_model
as a remote file server.
# service salt-master restart
To see the Salt processes:
# ps -ef | grep salt
To check the status, you can run these commands:
# systemctl status salt-master.service
# service salt-master status
# more /var/log/salt/master
# tail -f /var/log/salt/master
Copy the minion configuration file in the file /etc/salt/minion
# cp automated_junos_configuration_backup_on_git_with_syslog_saltstack/minion /etc/salt/minion
# service salt-minion restart
To see the Salt processes:
# ps -ef | grep salt
To check the status:
# systemctl status salt-minion.service
# service salt-minion status
You need to accept the minions/proxies public keys on the master.
To list all public keys:
# salt-key -L
To accept a specified public key:
# salt-key -a minion1 -y
Or, to accept all pending keys:
# salt-key -A -y
Run this command to make sure the minion is up and responding to the master. This is not an ICMP ping.
# salt minion1 test.ping
Run this additionnal test
# salt "minion1" cmd.run "pwd"
Pillars are variables (for templates, sls files ...).
They are defined in sls files, with a yaml data structure.
There is a top
file.
The top.sls
file map minions to sls (pillars) files.
Refer to the master configuration file to know the location for pillars.
Run these commands to copy pillars files at the root of the repository network_parameters
# cp automated_junos_configuration_backup_on_git_with_syslog_saltstack/pillars/* network_parameters/
# ls network_parameters/
# cd network_parameters
# git status
# git add .
# git status
# git commit -m "add pillars"
# git push origin master
# cd
$ sudo -s
# salt-run pillar.show_pillar
# salt-run pillar.show_pillar vMX-1
Copy the proxy configuration file in the file /etc/salt/proxy
# cp automated_junos_configuration_backup_on_git_with_syslog_saltstack/proxy /etc/salt/proxy
You need one salt proxy process per Junos device.
to start the proxy as a daemon for the device vMX-1
, run this command
# sudo salt-proxy -d --proxyid=vMX-1
The proxy daemon vMX-1
manages the network device vMX-1
.
you can run this command to start it with a debug log level:
# sudo salt-proxy -l debug --proxyid=vMX-1
To see the SaltStack processes, run this command:
# ps -ef | grep salt
You need to accept the minions/proxies public keys on the master.
To list all public keys:
# salt-key -L
To accept a specified public key:
# salt-key -a vMX-1 -y
Or, to accept all pending keys:
# salt-key -A -y
Run this command to make sure the proxy is up and responding to the master. This is not an ICMP ping.
# salt 'vMX*' test.ping
Grains are information collected from minions/proxies.
List the grains:
# salt vMX-1 grains.ls
Get the value of the grain nodename
to know where the proxy daemon vMX-1
is running:
# salt vMX-1 grains.item nodename
Verify if the host that runs the proxy daemon has the dependencies for Junos modules (junos-eznc
python library and other dependencies):
# salt minion1 cmd.run "pip list | grep junos"
Run this additionnal test. It is an execution module. The master asks to the proxy vMX-1
to use an execution module
# salt 'vMX*' junos.cli "show version"
Salt runs a files server to deliver files to minions and proxies.
The master configuration file indicates the location for the files server.
We are using an external files server (repository network_model
).
The files server has Junos configuration templates and SaltStack state files.
Run these commands to copy these Junos templates at the root of the repository network_model
.
# cp automated_junos_configuration_backup_on_git_with_syslog_saltstack/templates/* network_model/
# cd network_model/
# git add .
# git commit -m "add junos templates"
# git push origin master
# cd
Salt establishes a client-server model to bring infrastructure components in line with a given policy (salt state modules, in salt state sls files. kind of Ansible playbooks).
run these commands to copy these states files at the root of the repository network_model
# cp automated_junos_configuration_backup_on_git_with_syslog_saltstack/states/* network_model/
# cd network_model/
# git add *
# git commit -m "add states files"
# git push origin master
# cd
Engines are executed in a separate process that is monitored by Salt. If a Salt engine stops, it is restarted automatically.
Engines can run on both master and minion. To start an engine, you need to specify engine information in master/minion config file depending on where you want to run the engine. Once the engine configuration is added, start the master and minion normally. The engine should start along with the salt master/minion.
Junos_syslog engine listens to syslog messages from Junos devices, extracts event information and generates and pusblishes messages on SaltStack 0MQ bus.
We already added the junos syslog engine configuration in the master configuration file so the junos device should send their syslog messages to the master ip address on port 516.
# more /etc/salt/master
The reactor binds sls files to event tags. The reactor has a list of event tags to be matched, and each event tag has a list of reactor SLS files to be run. So these sls files define the SaltStack reactions.
To map some events to reactor sls files, copy the reactor configuration file to /etc/salt/master.d/reactor.conf
# cp automated_junos_configuration_backup_on_git_with_syslog_saltstack/reactor.conf /etc/salt/master.d/
# more /etc/salt/master.d/reactor.conf
This reactor binds jnpr/syslog/*/UI_COMMIT_COMPLETED
to /srv/reactor/automate_show_commands.sls
# service salt-master restart
# salt-run reactor.list
create a /srv/reactor/
directory
# mkdir /srv/reactor/
and copy these sls reactor files to the directory /srv/reactor/
# cp automated_junos_configuration_backup_on_git_with_syslog_saltstack/reactor/* /srv/reactor/
# ls /srv/reactor/
# more /srv/reactor/automate_show_commands.sls
The reactor automate_show_commands.sls parses the data from the ZMQ message that has the tags jnpr/syslog/*/UI_COMMIT_COMPLETED
and extracts the network device name and asks to the proxy that manages the device that send this syslog message to apply the state file collect_data_and_archive_to_git.sls
The state file collect_data_and_archive_to_git.sls executed by the proxy is located in the network_model
repository.
It collects show commands and archives the data collected to a git server.
# more network_model/collect_data_and_archive_to_git.sls
The list of junos commands to collect is maintained with the variable backup_configuration
the variable backup_configuration
is defined in the pillar backup_configuration.sls
Pillars are in the repository network_parameters
# more network_parameters/backup_configuration.sls
Run this command.
The master will ask to the proxy vMX-1
to execute the collect_data_and_archive_to_git.sls
state file.
salt vMX-1 state.apply collect_data_and_archive_to_git
The data collected by the proxy vMX-1
is archived in the repository configuration_backup
Access Gitlab GUI with a browser http://100.123.35.1:9080/organization/configuration_backup
The Salt master is listening junos syslog messages on port 516.
The pillar production.sls defines the variable syslog_host
.
the variable syslog_host
is the ip address of the salt master.
This variable is used by the state file syslog.sls to render the template syslog.conf
(to generate Junos configuration).
the state file syslog.sls then loads the generated configuration to Junos devices
# more network_parameters/production.sls
# more network_model/syslog.conf
# more network_model/syslog.sls
To get the value of the variable syslog_host
, run this command:
# salt 'vMX-1' pillar.item syslog_host
To execute the state file syslog.sls, run this command:
# salt 'vMX*' state.apply syslog
To verify, run these commands:
# salt vMX-1 junos.cli "show system commit"
# salt vMX-1 junos.cli "show configuration | compare rollback 1"
# salt vMX-1 junos.cli "show configuration system syslog host 100.123.35.1"
# salt vMX-1 junos.cli "show configuration system syslog host 100.123.35.1 | display set"
Most of the below commands are using the Git execution module.
So the master is asking to the minion to execute these modules.
# salt minion1 git.clone /tmp/local_copy [email protected]:organization/configuration_backup.git identity="/root/.ssh/id_rsa"
# salt minion1 cmd.run "ls /tmp/local_copy"
# salt minion1 git.config_set user.email [email protected] cwd=/tmp/local_copy
# salt minion1 git.config_set user.name ksator cwd=/tmp/local_copy
# salt minion1 git.config_get user.name cwd=/tmp/local_copy
# salt minion1 git.pull /tmp/local_copy
# salt minion1 file.touch "/tmp/local_copy/test.txt"
# salt minion1 file.write "/tmp/local_copy/test.txt" "hello from SaltStack using git execution module"
# salt minion1 cmd.run "more /tmp/local_copy/test.txt"
# salt minion1 git.status /tmp/local_copy
# salt minion1 git.add /tmp/local_copy /tmp/local_copy/test.txt
# salt minion1 git.status /tmp/local_copy
# salt minion1 git.commit /tmp/local_copy 'The commit message'
# salt minion1 git.status /tmp/local_copy
# salt minion1 git.push /tmp/local_copy origin master identity="/root/.ssh/id_rsa"
The above commands pushed the file test.txt
to this repository configuration_backup
of the gitlab organization organization
The state files collect_show_commands_example_1.sls and collect_show_commands_example_2.sls use a diff syntax but they are equivalents.
# more network_model/collect_show_commands_example_1.sls
Run this command. The master asks to the proxy vMX-1
to execute the sls file collect_show_commands_example_1.sls.
# salt vMX-1 state.apply collect_show_commands_example_1
# ls /tmp/show_chassis_hardware.txt
# ls /tmp/show_version.txt
# more network_model/collect_show_commands_example_2.sls
Run this command. The master asks to the proxy vMX-1
to execute the sls file collect_show_commands_example_2.sls.
# salt vMX-1 state.apply collect_show_commands_example_2
# ls /tmp/show_chassis_hardware.txt
# ls /tmp/show_version.txt
The state file collect_data_and_archive_to_git.sls collectes data from junos devices (show commands) and archive the data collected on a git server
# more network_model/collect_data_and_archive_to_git.sls
The pillar backup_configuration.sls is used by the state file collect_data_and_archive_to_git.sls.
It has the list of show commands we want SaltStack to collect.
# more network_parameters/backup_configuration.sls
The Salt master is listening junos syslog messages on port 516.
Run this command to see the syslog messages sent by junos devices on port 516.
# tcpdump -i eth0 port 516 -vv
Salt provides a runner that displays events in real-time as they are received on the Salt master.
to watch the 0MQ event bus, run this command
# salt-run state.event pretty=True
jcluser@vMX-1# set system login message "welcome to this demo"
jcluser@vMX-1# commit and-quit
The junos device sent a syslog message UI_COMMIT_COMPLETED
to SaltStack.
SaltStack rans show commands on this device to collect the new junos configuration and other details and archived the data collected on a git server.
The data collected by the proxy vMX-1
is archived in the repository configuration_backup
Access Gitlab GUI with a browser http://100.123.35.1:9080/organization/configuration_backup