I upgraded a palmetto based system to the latest version of petitboot from an old 2014 version. The system doesn't see the kboot.conf style FAT partiions as valid boot devices any longer. Is this something that isn't enabled by default or is this a bug of some kind?
[ 0.000000] dt-cpu-ftrs: setup for ISA 2070
[ 0.000000] dt-cpu-ftrs: not enabling: transactional-memory (disabled or unsupported by kernel)
[ 0.000000] dt-cpu-ftrs: not enabling: subcore (unknown and unsupported by kernel)
[ 0.000000] dt-cpu-ftrs: final cpu/mmu features = 0x000000ef8f5db1a7 0x3c006001
[ 0.000000] hash-mmu: Page sizes from device-tree:
[ 0.000000] hash-mmu: base_shift=12: shift=12, sllp=0x0000, avpnm=0x00000000, tlbiel=1, penc=0
[ 0.000000] hash-mmu: base_shift=12: shift=16, sllp=0x0000, avpnm=0x00000000, tlbiel=1, penc=7
[ 0.000000] hash-mmu: base_shift=12: shift=24, sllp=0x0000, avpnm=0x00000000, tlbiel=1, penc=56
[ 0.000000] hash-mmu: base_shift=16: shift=16, sllp=0x0110, avpnm=0x00000000, tlbiel=1, penc=1
[ 0.000000] hash-mmu: base_shift=16: shift=24, sllp=0x0110, avpnm=0x00000000, tlbiel=1, penc=8
[ 0.000000] hash-mmu: base_shift=20: shift=20, sllp=0x0130, avpnm=0x00000000, tlbiel=0, penc=2
[ 0.000000] hash-mmu: base_shift=24: shift=24, sllp=0x0100, avpnm=0x00000001, tlbiel=0, penc=0
[ 0.000000] hash-mmu: base_shift=34: shift=34, sllp=0x0120, avpnm=0x000007ff, tlbiel=0, penc=3
[ 0.000000] Page orders: linear mapping = 24, virtual = 16, io = 16, vmemmap = 24
[ 0.000000] Using 1TB segments
[ 0.000000] hash-mmu: Initializing hash mmu with SLB
[ 0.000000] Linux version 4.18.6-openpower1 (jenkins@hudson) (gcc version 6.4.0 (Buildroot 2018.05.2-00114-g1822255eab)) #2 SMP Fri Oct 5 11:48:17 UTC 2018
[ 0.000000] OPAL: Found non-mapped LPC bus on chip 0
[ 0.000000] Using PowerNV machine description
[ 0.000000] bootconsole [udbg0] enabled
[ 0.000000] CPU maps initialized for 8 threads per core
[ 0.000000] (thread shift is 3)
[ 0.000000] Allocated 3200 bytes for 32 pacas
[ 0.000000] -----------------------------------------------------
[ 0.000000] ppc64_pft_size = 0x0
[ 0.000000] phys_mem_size = 0x400000000
[ 0.000000] dcache_bsize = 0x80
[ 0.000000] icache_bsize = 0x80
[ 0.000000] cpu_features = 0x000000ef8f5db1a7
[ 0.000000] possible = 0x0000ffefcf5fb1a7
[ 0.000000] always = 0x00000003800081a1
[ 0.000000] cpu_user_features = 0xdc0065c2 0xae000000
[ 0.000000] mmu_features = 0x7c006001
[ 0.000000] firmware_features = 0x0000000010000000
[ 0.000000] htab_address = 0x(ptrval)
[ 0.000000] htab_hash_mask = 0x1ffff
[ 0.000000] -----------------------------------------------------
[ 0.000000] numa: NODE_DATA [mem 0x3ff522700-0x3ff52bfff]
[ 0.000000] rfi-flush: ori type flush available
[ 0.000000] rfi-flush: patched 7 locations (ori type flush)
[ 0.000000] barrier-nospec: using ORI speculation barrier
[ 0.000000] barrier-nospec: patched 391 locations
[ 0.000000] stf-barrier: hwsync barrier available
[ 0.000000] stf-barrier: patched 60 entry locations (hwsync barrier)
[ 0.000000] stf-barrier: patched 7 exit locations (hwsync barrier)
[ 0.000000] Initializing IODA2 PHB (/pciex@3fffe40000000)
[ 0.000000] PCI host bridge /pciex@3fffe40000000 (primary) ranges:
[ 0.000000] MEM 0x00003fe000000000..0x00003fe07ffeffff -> 0x0000000080000000
[ 0.000000] MEM 0x0000200000000000..0x000020ffffffffff -> 0x0000200000000000 (M64 #0..15)
[ 0.000000] Using M64 #15 as default window
[ 0.000000] 256 (255) PE's M32: 0x80000000 [segment=0x800000]
[ 0.000000] M64: 0x10000000000 [segment=0x100000000]
[ 0.000000] Allocated bitmap for 2040 MSIs (base IRQ 0x800)
[ 0.000000] Initializing IODA2 PHB (/pciex@3fffe40100000)
[ 0.000000] PCI host bridge /pciex@3fffe40100000 ranges:
[ 0.000000] MEM 0x00003fe080000000..0x00003fe0fffeffff -> 0x0000000080000000
[ 0.000000] MEM 0x0000210000000000..0x000021ffffffffff -> 0x0000210000000000 (M64 #0..15)
[ 0.000000] Using M64 #15 as default window
[ 0.000000] 256 (255) PE's M32: 0x80000000 [segment=0x800000]
[ 0.000000] M64: 0x10000000000 [segment=0x100000000]
[ 0.000000] Allocated bitmap for 2040 MSIs (base IRQ 0x1000)
[ 0.000000] Initializing IODA2 PHB (/pciex@3fffe40200000)
[ 0.000000] PCI host bridge /pciex@3fffe40200000 ranges:
[ 0.000000] MEM 0x00003fe100000000..0x00003fe17ffeffff -> 0x0000000080000000
[ 0.000000] MEM 0x0000220000000000..0x000022ffffffffff -> 0x0000220000000000 (M64 #0..15)
[ 0.000000] Using M64 #15 as default window
[ 0.000000] 256 (255) PE's M32: 0x80000000 [segment=0x800000]
[ 0.000000] M64: 0x10000000000 [segment=0x100000000]
[ 0.000000] Allocated bitmap for 2040 MSIs (base IRQ 0x1800)
[ 0.000000] OPAL nvram setup, 589824 bytes
[ 0.000000] Top of RAM: 0x400000000, Total RAM: 0x400000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x00000003ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x00000003ffffffff]
[ 0.000
[ 0.000000] percpu: Embedded 2 pages/cpu @(ptrval) s75928 r0 d55144 u131072
[ 0.000000] pcpu-alloc: s75928 r0 d55144 u131072 alloc=1*1048576
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 261920
[ 0.000000] Policy zone: DMA
[ 0.000000] Kernel command line: console=tty0 console=hvc0 ipr.fast_reboot=1 quiet
[ 0.000000] Memory: 16651648K/16777216K available (4544K kernel code, 960K rwdata, 1344K rodata, 11200K init, 1606K bss, 125568K reserved, 0K cma-reserved)
[ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x34/0x4a0 with crng_init=0
[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU event tracing is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=2048 to nr_cpu_ids=32.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
[ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
[ 0.000000] ICS OPAL backend registered
[ 0.000000] time_init: decrementer frequency = 512.000000 MHz
[ 0.000000] time_init: processor frequency = 4024.000000 MHz
[ 0.000004] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x761537d007, max_idle_ns: 440795202126 ns
[ 0.000007] clocksource: timebase mult[1f40000] shift[24] registered
[ 0.000010] clockevent: decrementer mult[83126e98] shift[32] cpu[8]
[ 0.000284] Console: colour dummy device 80x25
[ 0.000291] console [tty0] enabled
[ 0.000294] console [hvc0] enabled
[ 0.000296] bootconsole [udbg0] disabled
[ 0.000357] pid_max: default: 32768 minimum: 301
[ 0.002036] Dentry cache hash table entries: 2097152 (order: 8, 16777216 bytes)
[ 0.002942] Inode-cache hash table entries: 1048576 (order: 7, 8388608 bytes)
[ 0.003007] Mount-cache hash table entries: 32768 (order: 2, 262144 bytes)
[ 0.003037] Mountpoint-cache hash table entries: 32768 (order: 2, 262144 bytes)
[ 0.003785] EEH: PowerNV platform initialized
[ 0.003789] POWER8 performance monitor hardware support registered
[ 0.003836] Hierarchical SRCU implementation.
[ 0.004323] smp: Bringing up secondary CPUs ...
[ 0.024172] smp: Brought up 1 node, 32 CPUs
[ 0.024175]
[ 0.035914] NET: Registered protocol family 16
[ 0.036062] EEH: No capable adapters found
[ 0.036934] cpuidle: using governor menu
[ 0.165791] PCI: Probing PCI hardware
[ 0.165894] PCI host bridge to bus 0000:00
[ 0.165904] pci_bus 0000:00: root bus resource [mem 0x3fe000000000-0x3fe07ffeffff] (bus address [0x80000000-0xfffeffff])
[ 0.165911] pci_bus 0000:00: root bus resource [mem 0x200000000000-0x20fdffffffff 64bit pref]
[ 0.165917] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.165924] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.165977] pci 0000:00:00.0: [1014:03dc] type 01 class 0x060400
[ 0.166200] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.172802] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.172861] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.172914] PCI host bridge to bus 0001:00
[ 0.172923] pci_bus 0001:00: root bus resource [mem 0x3fe080000000-0x3fe0fffeffff] (bus address [0x80000000-0xfffeffff])
[ 0.172929] pci_bus 0001:00: root bus resource [mem 0x210000000000-0x21fdffffffff 64bit pref]
[ 0.172934] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.172940] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.172979] pci 0001:00:00.0: [1014:03dc] type 01 class 0x060400
[ 0.173190] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.176632] pci 0001:01:00.0: [10b5:8718] type 01 class 0x060400
[ 0.176713] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x0003ffff]
[ 0.176990] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.180323] pci 0001:00:00.0: PCI bridge to [bus 01-07]
[ 0.180640] pci 0001:02:01.0: [10b5:8718] type 01 class 0x060400
[ 0.180995] pci 0001:02:01.0: PME# supported from D0 D3hot D3cold
[ 0.181259] pci 0001:02:02.0: [10b5:8718] type 01 class 0x060400
[ 0.181617] pci 0001:02:02.0: PME# supported from D0 D3hot D3cold
[ 0.181881] pci 0001:02:03.0: [10b5:8718] type 01 class 0x060400
[ 0.182244] pci 0001:02:03.0: PME# supported from D0 D3hot D3cold
[ 0.182511] pci 0001:02:04.0: [10b5:8718] type 01 class 0x060400
[ 0.182870] pci 0001:02:04.0: PME# supported from D0 D3hot D3cold
[ 0.185791] pci 0001:01:00.0: PCI bridge to [bus 02-07]
[ 0.186152] pci 0001:03:00.0: [1a03:1150] type 01 class 0x060400
[ 0.186296] pci 0001:03:00.0: enabling Extended Tags
[ 0.186471] pci 0001:03:00.0: supports D1 D2
[ 0.186476] pci 0001:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.189801] pci 0001:02:01.0: PCI bridge to [bus 03-04]
[ 0.189853] pci 0001:03:00.0: bridge configuration invalid ([bus 04-04]), reconfiguring
[ 0.189977] pci_bus 0001:04: extended config space not accessible
[ 0.190056] pci 0001:04:00.0: [1a03:2000] type 00 class 0x030000
[ 0.190101] pci 0001:04:00.0: reg 0x10: [mem 0x00000000-0x00ffffff]
[ 0.190123] pci 0001:04:00.0: reg 0x14: [mem 0x00000000-0x0001ffff]
[ 0.190145] pci 0001:04:00.0: reg 0x18: [io 0x0000-0x007f]
[ 0.190331] pci 0001:04:00.0: supports D1 D2
[ 0.190336] pci 0001:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.193645] pci 0001:03:00.0: PCI bridge to [bus 04]
[ 0.193698] pci_bus 0001:04: busn_res: [bus 04] end is updated to 04
[ 0.193861] pci 0001:05:00.0: [104c:8241] type 00 class 0x0c0330
[ 0.193931] pci 0001:05:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit]
[ 0.193964] pci 0001:05:00.0: reg 0x18: [mem 0x00000000-0x00001fff 64bit]
[ 0.194046] pci 0001:05:00.0: BAR2 [mem size 0x00002000 64bit]: requesting alignment to 0x10000
[ 0.194187] pci 0001:05:00.0: supports D1 D2
[ 0.194192] pci 0001:05:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.197511] pci 0001:02:02.0: PCI bridge to [bus 05]
[ 0.197720] pci 0001:06:00.0: [14e4:1656] type 00 class 0x020000
[ 0.197799] pci 0001:06:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit pref]
[ 0.197833] pci 0001:06:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit pref]
[ 0.197866] pci 0001:06:00.0: reg 0x20: [mem 0x00000000-0x0000ffff 64bit pref]
[ 0.198120] pci 0001:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.198339] pci 0001:06:00.1: [14e4:1656] type 00 class 0x020000
[ 0.198419] pci 0001:06:00.1: reg 0x10: [mem 0x00000000-0x0000ffff 64bit pref]
[ 0.198453] pci 0001:06:00.1: reg 0x18: [mem 0x00000000-0x0000ffff 64bit pref]
[ 0.198486] pci 0001:06:00.1: reg 0x20: [mem 0x00000000-0x0000ffff 64bit pref]
[ 0.198741] pci 0001:06:00.1: PME# supported from D0 D3hot D3cold
[ 0.202021] pci 0001:02:03.0: PCI bridge to [bus 06]
[ 0.202233] pci 0001:07:00.0: [1b4b:9235] type 00 class 0x010601
[ 0.202296] pci 0001:07:00.0: reg 0x10: [io 0x8000-0x8007]
[ 0.202322] pci 0001:07:00.0: reg 0x14: [io 0x8040-0x8043]
[ 0.202347] pci 0001:07:00.0: reg 0x18: [io 0x8100-0x8107]
[ 0.202373] pci 0001:07:00.0: reg 0x1c: [io 0x8140-0x8143]
[ 0.202398] pci 0001:07:00.0: reg 0x20: [io 0x800000-0x80001f]
[ 0.202424] pci 0001:07:00.0: reg 0x24: [mem 0x00900000-0x009007ff]
[ 0.202450] pci 0001:07:00.0: reg 0x30: [mem 0x3fe0d0000000-0x3fe0d000ffff pref]
[ 0.202485] pci 0001:07:00.0: BAR5 [mem size 0x00000800]: requesting alignment to 0x10000
[ 0.202606] pci 0001:07:00.0: PME# supported from D3hot
[ 0.205922] pci 0001:02:04.0: PCI bridge to [bus 07]
[ 0.206055] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 07
[ 0.206113] PCI host bridge to bus 0002:00
[ 0.206121] pci_bus 0002:00: root bus resource [mem 0x3fe100000000-0x3fe17ffeffff] (bus address [0x80000000-0xfffeffff])
[ 0.206127] pci_bus 0002:00: root bus resource [mem 0x220000000000-0x22fdffffffff 64bit pref]
[ 0.206133] pci_bus 0002:00: root bus resource [bus 00-ff]
[ 0.206139] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.206178] pci 0002:00:00.0: [1014:03dc] type 01 class 0x060400
[ 0.206393] pci 0002:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.212983] pci 0002:00:00.0: PCI bridge to [bus 01-ff]
[ 0.213041] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.213076] pci 0000:00 : [PE# fe] Secondary bus 0 associated with PE#fe
[ 0.213457] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.213487] pci_bus 0000:00: resource 4 [mem 0x3fe000000000-0x3fe07ffeffff]
[ 0.213493] pci_bus 0000:00: resource 5 [mem 0x200000000000-0x20fdffffffff 64bit pref]
[ 0.213637] pci 0001:00:00.0: BAR 9: assigned [mem 0x210000000000-0x2100ffffffff 64bit pref]
[ 0.213644] pci 0001:00:00.0: BAR 8: assigned [mem 0x3fe080000000-0x3fe082ffffff]
[ 0.213650] pci 0001:00:00.0: BAR 7: no space for [io size 0x2000]
[ 0.213656] pci 0001:00:00.0: BAR 7: failed to assign [io size 0x2000]
[ 0.213665] pci 0001:01:00.0: BAR 9: assigned [mem 0x210000000000-0x2100ffffffff 64bit pref]
[ 0.213671] pci 0001:01:00.0: BAR 8: assigned [mem 0x3fe080000000-0x3fe0827fffff]
[ 0.213678] pci 0001:01:00.0: BAR 0: assigned [mem 0x3fe082800000-0x3fe08283ffff]
[ 0.213690] pci 0001:01:00.0: BAR 7: no space for [io size 0x2000]
[ 0.213695] pci 0001:01:00.0: BAR 7: failed to assign [io size 0x2000]
[ 0.213705] pci 0001:02:03.0: BAR 9: assigned [mem 0x210000000000-0x2100ffffffff 64bit pref]
[ 0.213712] pci 0001:02:01.0: BAR 8: assigned [mem 0x3fe080000000-0x3fe0817fffff]
[ 0.213718] pci 0001:02:02.0: BAR 8: assigned [mem 0x3fe081800000-0x3fe081ffffff]
[ 0.213725] pci 0001:02:04.0: BAR 8: assigned [mem 0x3fe082000000-0x3fe0827fffff]
[ 0.213730] pci 0001:02:01.0: BAR 7: no space for [io size 0x1000]
[ 0.213736] pci 0001:02:01.0: BAR 7: failed to assign [io size 0x1000]
[ 0.213741] pci 0001:02:04.0: BAR 7: no space for [io size 0x1000]
[ 0.213747] pci 0001:02:04.0: BAR 7: failed to assign [io size 0x1000]
[ 0.213754] pci 0001:03:00.0: BAR 8: assigned [mem 0x3fe080000000-0x3fe0817fffff]
[ 0.213760] pci 0001:03:00.0: BAR 7: no space for [io size 0x1000]
[ 0.213766] pci 0001:03:00.0: BAR 7: failed to assign [io size 0x1000]
[ 0.213774] pci 0001:04:00.0: BAR 0: assigned [mem 0x3fe080000000-0x3fe080ffffff]
[ 0.213787] pci 0001:04:00.0: BAR 1: assigned [mem 0x3fe081000000-0x3fe08101ffff]
[ 0.213799] pci 0001:04:00.0: BAR 2: no space for [io size 0x0080]
[ 0.213804] pci 0001:04:00.0: BAR 2: failed to assign [io size 0x0080]
[ 0.213811] pci 0001:00 : [PE# fe] Secondary bus 0 associated with PE#fe
[ 0.214193] pci 0001:04 : [PE# fd] Secondary bus 4..4 associated with PE#fd
[ 0.214574] pci 0001:04 : [PE# fd] Setting up 32-bit TCE table at 0..80000000
[ 0.227740] IOMMU table initialized, virtual merging enabled
[ 0.227746] pci 0001:04 : [PE# fd] Setting up window#0 0..7fffffff pg=1000
[ 0.227754] pci 0001:04 : [PE# fd] Enabling 64-bit DMA bypass
[ 0.227760] pci 0001:03:00.0: PCI bridge to [bus 04]
[ 0.227774] pci 0001:03:00.0: bridge window [mem 0x3fe080000000-0x3fe0817fffff]
[ 0.227797] pci 0001:03 : [PE# fc] Secondary bus 3 associated with PE#fc
[ 0.228175] pci 0001:02:01.0: PCI bridge to [bus 03-04]
[ 0.228189] pci 0001:02:01.0: bridge window [mem 0x3fe080000000-0x3fe0817fffff]
[ 0.228212] pci 0001:05:00.0: BAR 0: assigned [mem 0x3fe081800000-0x3fe08180ffff 64bit]
[ 0.228240] pci 0001:05:00.0: BAR 2: assigned [mem 0x3fe081810000-0x3fe081811fff 64bit]
[ 0.228269] pci 0001:05 : [PE# fb] Secondary bus 5 associated with PE#fb
[ 0.228649] pci 0001:05 : [PE# fb] Setting up 32-bit TCE table at 0..80000000
[ 0.241787] pci 0001:05 : [PE# fb] Setting up window#0 0..7fffffff pg=1000
[ 0.241793] pci 0001:05 : [PE# fb] Enabling 64-bit DMA bypass
[ 0.241799] pci 0001:02:02.0: PCI bridge to [bus 05]
[ 0.241813] pci 0001:02:02.0: bridge window [mem 0x3fe081800000-0x3fe081ffffff]
[ 0.241838] pci 0001:06:00.0: BAR 0: assigned [mem 0x210000000000-0x21000000ffff 64bit pref]
[ 0.241866] pci 0001:06:00.0: BAR 2: assigned [mem 0x210000010000-0x21000001ffff 64bit pref]
[ 0.241894] pci 0001:06:00.0: BAR 4: assigned [mem 0x210000020000-0x21000002ffff 64bit pref]
[ 0.241921] pci 0001:06:00.1: BAR 0: assigned [mem 0x210000030000-0x21000003ffff 64bit pref]
[ 0.241949] pci 0001:06:00.1: BAR 2: assigned [mem 0x210000040000-0x21000004ffff 64bit pref]
[ 0.241977] pci 0001:06:00.1: BAR 4: assigned [mem 0x210000050000-0x21000005ffff 64bit pref]
[ 0.242015] pci 0001:06 : [PE# 00] Secondary bus 6 associated with PE#0
[ 0.242398] pci 0001:06 : [PE# 00] Setting up 32-bit TCE table at 0..80000000
[ 0.255568] pci 0001:06 : [PE# 00] Setting up window#0 0..7fffffff pg=1000
[ 0.255574] pci 0001:06 : [PE# 00] Enabling 64-bit DMA bypass
[ 0.255580] pci 0001:02:03.0: PCI bridge to [bus 06]
[ 0.255600] pci 0001:02:03.0: bridge window [mem 0x210000000000-0x2100ffffffff 64bit pref]
[ 0.255619] pci 0001:07:00.0: BAR 5: assigned [mem 0x3fe082000000-0x3fe0820007ff]
[ 0.255632] pci 0001:07:00.0: BAR 6: assigned [mem 0x3fe082010000-0x3fe08201ffff pref]
[ 0.255639] pci 0001:07:00.0: BAR 4: no space for [io size 0x0020]
[ 0.255644] pci 0001:07:00.0: BAR 4: failed to assign [io size 0x0020]
[ 0.255650] pci 0001:07:00.0: BAR 0: no space for [io size 0x0008]
[ 0.255656] pci 0001:07:00.0: BAR 0: failed to assign [io size 0x0008]
[ 0.255661] pci 0001:07:00.0: BAR 2: no space for [io size 0x0008]
[ 0.255667] pci 0001:07:00.0: BAR 2: failed to assign [io size 0x0008]
[ 0.255672] pci 0001:07:00.0: BAR 1: no space for [io size 0x0004]
[ 0.255678] pci 0001:07:00.0: BAR 1: failed to assign [io size 0x0004]
[ 0.255683] pci 0001:07:00.0: BAR 3: no space for [io size 0x0004]
[ 0.255689] pci 0001:07:00.0: BAR 3: failed to assign [io size 0x0004]
[ 0.255698] pci 0001:07 : [PE# fa] Secondary bus 7 associated with PE#fa
[ 0.256078] pci 0001:07 : [PE# fa] Setting up 32-bit TCE table at 0..80000000
[ 0.269235] pci 0001:07 : [PE# fa] Settin
[ 0.269240] pci 0001:07 : [PE# fa] Enabling 64-bit DMA bypass
[ 0.269246] pci 0001:02:04.0: PCI bridge to [bus 07]
[ 0.269260] pci 0001:02:04.0: bridge window [mem 0x3fe082000000-0x3fe0827fffff]
[ 0.269285] pci 0001:02 : [PE# f9] Secondary bus 2 associated with PE#f9
[ 0.269665] pci 0001:01:00.0: PCI bridge to [bus 02-07]
[ 0.269678] pci 0001:01:00.0: bridge window [mem 0x3fe080000000-0x3fe0ffefffff]
[ 0.269689] pci 0001:01:00.0: bridge window [mem 0x210000000000-0x21fdfff0ffff 64bit pref]
[ 0.269708] pci 0001:01 : [PE# f8] Secondary bus 1 associated with PE#f8
[ 0.270087] pci 0001:00:00.0: PCI bridge to [bus 01-07]
[ 0.270102] pci 0001:00:00.0: bridge window [mem 0x3fe080000000-0x3fe0ffefffff]
[ 0.270113] pci 0001:00:00.0: bridge window [mem 0x210000000000-0x21fdfff0ffff 64bit pref]
[ 0.270129] pci_bus 0001:00: Some PCI device resources are unassigned, try booting with pci=realloc
[ 0.270137] pci_bus 0001:00: resource 4 [mem 0x3fe080000000-0x3fe0fffeffff]
[ 0.270143] pci_bus 0001:00: resource 5 [mem 0x210000000000-0x21fdffffffff 64bit pref]
[ 0.270149] pci_bus 0001:01: resource 1 [mem 0x3fe080000000-0x3fe0ffefffff]
[ 0.270155] pci_bus 0001:01: resource 2 [mem 0x210000000000-0x21fdfff0ffff 64bit pref]
[ 0.270161] pci_bus 0001:02: resource 1 [mem 0x3fe080000000-0x3fe0ffefffff]
[ 0.270167] pci_bus 0001:02: resource 2 [mem 0x210000000000-0x21fdfff0ffff 64bit pref]
[ 0.270173] pci_bus 0001:03: resource 1 [mem 0x3fe080000000-0x3fe0817fffff]
[ 0.270179] pci_bus 0001:04: resource 1 [mem 0x3fe080000000-0x3fe0817fffff]
[ 0.270185] pci_bus 0001:05: resource 1 [mem 0x3fe081800000-0x3fe081ffffff]
[ 0.270192] pci_bus 0001:06: resource 2 [mem 0x210000000000-0x2100ffffffff 64bit pref]
[ 0.270197] pci_bus 0001:07: resource 1 [mem 0x3fe082000000-0x3fe0827fffff]
[ 0.270227] pci 0002:00 : [PE# fe] Secondary bus 0 associated with PE#fe
[ 0.270604] pci 0002:00:00.0: PCI bridge to [bus 01-ff]
[ 0.270634] pci_bus 0002:00: resource 4 [mem 0x3fe100000000-0x3fe17ffeffff]
[ 0.270640] pci_bus 0002:00: resource 5 [mem 0x220000000000-0x22fdffffffff 64bit pref]
[ 0.271750] PCI: Probing PCI hardware done
[ 0.274301] powernv-rng: Registering arch random hook.
[ 0.276188] pci 0001:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.276191] pci 0001:04:00.0: vgaarb: bridge control possible
[ 0.276195] pci 0001:04:00.0: vgaarb: setting as boot device (VGA legacy resources not available)
[ 0.276195] vgaarb: loaded
[ 0.276264] SCSI subsystem initialized
[ 0.276281] libata version 3.00 loaded.
[ 0.276328] pps_core: LinuxPPS API ver. 1 registered
[ 0.276329] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [email protected]
[ 0.276505] clocksource: Switched to clocksource timebase
[ 0.277537] NET: Registered protocol family 2
[ 0.277650] tcp_listen_portaddr_hash hash table entries: 8192 (order: 1, 131072 bytes)
[ 0.277672] TCP established hash table entries: 131072 (order: 4, 1048576 bytes)
[ 0.277919] TCP bind hash table entries: 65536 (order: 4, 1048576 bytes)
[ 0.278043] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.278077] UDP hash table entries: 8192 (order: 2, 262144 bytes)
[ 0.278110] UDP-Lite hash table entries: 8192 (order: 2, 262144 bytes)
[ 0.278195] NET: Registered protocol family 1
[ 0.278223] pci 0001:00:00.0: enabling device (0145 -> 0147)
[ 0.278228] pci 0001:01:00.0: enabling device (0545 -> 0547)
[ 0.278234] pci 0001:02:02.0: enabling device (0545 -> 0547)
[ 0.278240] pci 0001:05:00.0: enabling device (0140 -> 0142)
[ 0.278267] PCI: CLS 0 bytes, default 128
[ 1.777627] random: fast init done
[ 1.777859] Initialise system trusted keyrings
[ 1.777887] workingset: timestamp_bits=54 max_order=18 bucket_order=0
[ 1.779680] Key type asymmetric registered
[ 1.779681] Asymmetric key parser 'x509' registered
[ 1.779711] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.779713] io scheduler noop registered
[ 1.779752] io scheduler cfq registered (default)
[ 1.779754] io scheduler mq-deadline registered
[ 1.779755] io scheduler kyber registered
[ 1.779972] ipmi message handler version 39.2
[ 1.779974] ipmi device interface
[ 1.779995] ipmi-powernv ibm,opal:ipmi: Unable to map irq from device tree
[ 1.783043] ipmi-powernv ibm,opal:ipmi: Found new BMC (man_id: 0x000000, prod_id: 0xaabb, dev_id: 0x20)
[ 1.852068] IPMI Watchdog: driver initialized
[ 1.860100] hvc0: raw protocol on /ibm,opal/consoles/serial@0 (boot console)
[ 1.860104] hvc0: No interrupts property, using OPAL event
[ 1.860276] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.860461] powernv_rng: Registered powernv hwrng.
[ 1.861770] brd: module loaded
[ 1.862674] loop: module loaded
[ 1.862728] libphy: Fixed MDIO Bus: probed
[ 1.862823] i2c /dev entries driver
[ 1.862836] powernv-cpufreq: cpufreq pstate min 0xffffffbc nominal 0xfffffff7 max 0x0
[ 1.862838] powernv-cpufreq: Workload Optimized Frequency is disabled in the platform
[ 1.863378] powernv_idle_driver registered
[ 1.863626] ipip: IPv4 and MPLS over IPv4 tunneling driver
[ 1.864018] NET: Registered protocol family 10
[ 1.864337] Segment Routing with IPv6
[ 1.864351] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 1.864453] NET: Registered protocol family 17
[ 1.864459] Key type dns_resolver registered
[ 1.864487] drmem: No dynamic reconfiguration memory found
[ 1.864806] Loading compiled-in X.509 certificates
[ 1.869765] Loaded X.509 cert 'Build time autogenerated kernel key: 915799b5ac56586115140435be8a4f6b173ba254'
[ 1.873941] Key type encrypted registered
[ 1.873996] hctosys: unable to open rtc device (rtc0)
[ 1.874959] Freeing unused kernel memory: 11200K
[ 2.172525] udevd[1369]: starting version 3.2.5
[ 2.172737] random: udevd: uninitialized urandom read (16 bytes read)
[ 2.172779] random: udevd: uninitialized urandom read (16 bytes read)
[ 2.172818] random: udevd: uninitialized urandom read (16 bytes read)
[ 2.175921] udevd[1370]: starting eudev-3.2.5
[ 2.198685] PTP clock support registered
[ 2.204344] tg3.c:v3.137 (May 11, 2014)
[ 2.204362] pci 0001:02:03.0: enabling device (0545 -> 0547)
[ 2.204374] tg3 0001:06:00.0: enabling device (0140 -> 0142)
[ 2.204670] ahci 0001:07:00.0: version 3.0
[ 2.204679] pci 0001:02:04.0: enabling device (0545 -> 0547)
[ 2.204687] ahci 0001:07:00.0: enabling device (0141 -> 0143)
[ 2.204762] ahci 0001:07:00.0: Using 64-bit DMA iommu bypass
[ 2.211240] usbcore: registered new interface driver usbfs
[ 2.211260] usbcore: registered new interface driver hub
[ 2.211424] usbcore: registered new device driver usb
[ 2.214894] ahci 0001:07:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 2.214911] ahci 0001:07:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 2.215958] scsi host0: ahci
[ 2.216270] scsi host1: ahci
[ 2.216512] scsi host2: ahci
[ 2.216796] scsi host3: ahci
[ 2.216920] ata1: SATA max UDMA/133 abar m2048@0x3fe082000000 port 0x3fe082000100 irq 505
[ 2.216925] ata2: SATA max UDMA/133 abar m2048@0x3fe082000000 port 0x3fe082000180 irq 505
[ 2.216930] ata3: SATA max UDMA/133 abar m2048@0x3fe082000000 port 0x3fe082000200 irq 505
[ 2.216935] ata4: SATA max UDMA/133 abar m2048@0x3fe082000000 port 0x3fe082000280 irq 505
[ 2.220323] xhci_hcd 0001:05:00.0: xHCI Host Controller
[ 2.220334] xhci_hcd 0001:05:00.0: new USB bus registered, assigned bus number 1
[ 2.220411] xhci_hcd 0001:05:00.0: Using 64-bit DMA iommu bypass
[ 2.220471] xhci_hcd 0001:05:00.0: hcc params 0x0270f06d hci version 0x96 quirks 0x0000000004000000
[ 2.221005] hub 1-0:1.0: USB hub found
[ 2.221022] hub 1-0:1.0: 4 ports detected
[ 2.221196] xhci_hcd 0001:05:00.0: xHCI Host Controller
[ 2.221201] xhci_hcd 0001:05:00.0: new USB bus registered, assigned bus number 2
[ 2.221205] xhci_hcd 0001:05:00.0: Host supports USB 3.0 SuperSpeed
[ 2.221233] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.221370] hub 2-0:1.0: USB hub found
[ 2.221380] hub 2-0:1.0: 4 ports detected
[ 2.226589] rtc-opal opal-rtc: rtc core: registered rtc-opal as rtc0
[ 2.231586] pci 0001:02:01.0: enabling device (0545 -> 0547)
[ 2.231601] pci 0001:03:00.0: enabling device (0145 -> 0147)
[ 2.231610] ast 0001:04:00.0: enabling device (0140 -> 0142)
[ 2.231668] [drm] platform has no IO space, trying MMIO
[ 2.231672] [drm] VGA not enabled on entry, requesting chip POST
[ 2.231682] [drm] Using device-tree for configuration
[ 2.231683] [drm] AST 2400 detected
[ 2.231687] [drm] Analog VGA only
[ 2.231716] [drm] dram MCLK=408 Mhz type=7 bus_width=16 size=01000000
[ 2.231786] [TTM] Zone kernel: Available graphics memory: 8331424 kiB
[ 2.231788] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 2.231789] [TTM] Initializing pool allocator
[ 2.236485] tg3 0001:06:00.0: Using 64-bit DMA iommu bypass
[ 2.236748] tg3 0001:06:00.0 eth0: Tigon3 [partno(BCM95718) rev 5717100] (PCI Express) MAC address a0:42:3f:28:47:69
[ 2.236751] tg3 0001:06:00.0 eth0: attached PHY is 5718C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ 2.236754] tg3 0001:06:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
[ 2.236756] tg3 0001:06:00.0 eth0: dma_rwctrl[00000000] dma_mask[64-bit]
[ 2.237449] tg3 0001:06:00.1: enabling device (0140 -> 0142)
[ 2.261679] at24 0-0052: 256 byte 24c02 EEPROM, writable, 1 bytes/write
[ 2.262115] at24 0-0053: 256 byte 24c02 EEPROM, writable, 1 bytes/write
[ 2.262524] at24 0-0054: 256 byte 24c02 EEPROM, writable, 1 bytes/write
[ 2.262927] at24 0-0055: 256 byte 24c02 EEPROM, writable, 1 bytes/write
[ 2.263030] at24 1-0050: 16384 byte 24c128 EEPROM, writable, 1 bytes/write
[ 2.263132] at24 1-0051: 16384 byte 24c128 EEPROM, writable, 1 bytes/write
[ 2.263236] at24 2-0050: 16384 byte 24c128 EEPROM, writable, 1 bytes/write
[ 2.263335] at24 2-0051: 16384 byte 24c128 EEPROM, writable, 1 bytes/write
[ 2.263508] at24 3-0050: 16384 byte 24c128 EEPROM, writable, 1 bytes/write
[ 2.363447] Console: switching to colour frame buffer device 128x48
[ 2.428138] ast 0001:04:00.0: fb0: astdrmfb frame buffer device
[ 2.433529] tg3 0001:06:00.1: Using 64-bit DMA iommu bypass
[ 2.433693] tg3 0001:06:00.1 eth1: Tigon3 [partno(BCM95718) rev 5717100] (PCI Express) MAC address a0:42:3f:28:47:6a
[ 2.433695] tg3 0001:06:00.1 eth1: attached PHY is 5718C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ 2.433697] tg3 0001:06:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
[ 2.433698] tg3 0001:06:00.1 eth1: dma_rwctrl[00000000] dma_mask[64-bit]
[ 2.434686] tg3 0001:06:00.0 enP1p6s0f0: renamed from eth0
[ 2.476517] [drm] Initialized ast 0.1.0 20120228 for 0001:04:00.0 on minor 0
[ 2.546736] tg3 0001:06:00.1 enP1p6s0f1: renamed from eth1
[ 2.686515] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[ 2.716520] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.716540] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.717724] ata4.00: ATA-9: ST1000NM0033-9ZM173, SN04, max UDMA/133
[ 2.717727] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 2.717777] ata3.00: ATA-9: ST1000NM0033-9ZM173, SN04, max UDMA/133
[ 2.717780] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 2.718848] ata4.00: configured for UDMA/133
[ 2.718901] ata3.00: configured for UDMA/133
[ 2.726523] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.726540] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.727718] ata2.00: ATA-9: ST1000NM0033-9ZM173, SN04, max UDMA/133
[ 2.727720] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 2.727729] ata1.00: ATA-9: ST1000NM0033-9ZM173, SN04, max UDMA/133
[ 2.727732] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 2.728827] ata2.00: configured for UDMA/133
[ 2.728845] ata1.00: configured for UDMA/133
[ 2.728973] scsi 0:0:0:0: Direct-Access ATA ST1000NM0033-9ZM SN04 PQ: 0 ANSI: 5
[ 2.729278] scsi 1:0:0:0: Direct-Access ATA ST1000NM0033-9ZM SN04 PQ: 0 ANSI: 5
[ 2.729606] scsi 2:0:0:0: Direct-Access ATA ST1000NM0033-9ZM SN04 PQ: 0 ANSI: 5
[ 2.729846] scsi 3:0:0:0: Direct-Access ATA ST1000NM0033-9ZM SN04 PQ: 0 ANSI: 5
[ 2.733612] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.733656] scsi 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.733700] scsi 2:0:0:0: Attached scsi generic sg2 type 0
[ 2.733742] scsi 3:0:0:0: Attached scsi generic sg3 type 0
[ 2.737779] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.737804] sd 0:0:0:0: [sda] Write Protect is off
[ 2.737809] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.737851] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.737922] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.737951] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.737958] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.737993] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.738007] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.738019] sd 2:0:0:0: [sdc] Write Protect is off
[ 2.738025] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.738051] sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.738074] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.738076] sd 3:0:0:0: [sdd] Write Protect is off
[ 2.738081] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.738118] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.771521] sda: sda1 sda2 sda3
[ 2.771968] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 2.772745] sdb: sdb1 sdb2 sdb3
[ 2.773134] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[ 2.773519] sdd: sdd1 sdd2 sdd3
[ 2.773902] sd 3:0:0:0: [sdd] Attached SCSI removable disk
[ 2.775473] sdc: sdc1 sdc2 sdc3
[ 2.775883] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[ 2.894112] hub 1-3:1.0: USB hub found
[ 2.894468] hub 1-3:1.0: 5 ports detected
[ 2.994458] IPv6: ADDRCONF(NETDEV_UP): enP1p6s0f0: link is not ready
[ 2.995678] random: crng init done
[ 2.995681] random: 5 urandom warning(s) missed due to ratelimiting
[ 3.236509] usb 1-3.1: new high-speed USB device number 3 using xhci_hcd
[ 3.247393] IPv6: ADDRCONF(NETDEV_UP): enP1p6s0f1: link is not ready
[ 3.259493] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: [email protected]
[ 3.395732] usb-storage 1-3.1:1.0: USB Mass Storage device detected
[ 3.395842] scsi host4: usb-storage 1-3.1:1.0
[ 3.395910] usbcore: registered new interface driver usb-storage
[ 3.443083] device-mapper: table: 254:12: linear: Device lookup failed
[ 3.443086] device-mapper: ioctl: error adding target to table
[ 3.452572] device-mapper: table: 254:12: linear: Device lookup failed
[ 3.452575] device-mapper: ioctl: error adding target to table
[ 3.455631] device-mapper: table: 254:12: linear: Device lookup failed
[ 3.455633] device-mapper: ioctl: error adding target to table
[ 3.458272] device-mapper: table: 254:12: linear: Device lookup failed
[ 3.458273] device-mapper: ioctl: error adding target to table
[ 3.458913] device-mapper: table: 254:12: linear: Device lookup failed
[ 3.458915] device-mapper: ioctl: error adding target to table
[ 3.461475] device-mapper: table: 254:12: linear: Device lookup failed
[ 3.461476] device-mapper: ioctl: error adding target to table
[ 3.463884] device-mapper: table: 254:12: linear: Device lookup failed
[ 3.463885] device-mapper: ioctl: error adding target to table
[ 3.465898] device-mapper: table: 254:12: linear: Device lookup failed
[ 3.465901] device-mapper: ioctl: error adding target to table
[ 3.468475] device-mapper: table: 254:12: linear: Device lookup failed
[ 3.468477] device-mapper: ioctl: error adding target to table
[ 3.471060] device-mapper: table: 254:12: linear: Device lookup failed
[ 3.471062] device-mapper: ioctl: error adding target to table
[ 3.473706] device-mapper: table: 254:12: linear: Device lookup failed
[ 3.473708] device-mapper: ioctl: error adding target to table
[ 3.474379] device-mapper: table: 254:12: linear: Device lookup failed
[ 3.474381] device-mapper: ioctl: error adding target to table
[ 3.526512] usb 1-3.3: new high-speed USB device number 4 using xhci_hcd
[ 3.691246] usb-storage 1-3.3:1.0: USB Mass Storage device detected
[ 3.691341] scsi host5: usb-storage 1-3.3:1.0
[ 3.806503] usb 1-3.4: new low-speed USB device number 5 using xhci_hcd
[ 4.019196] usbcore: registered new interface driver usbhid
[ 4.019198] usbhid: USB HID core driver
[ 4.021170] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0001:00/0001:00:00.0/0001:01:00.0/0001:02:02.0/0001:05:00.0/usb1/1-3/1-3.4/1-3.4:1.0/0003:046B:FF10.0001/input/input0
[ 4.021215] hid-generic 0003:046B:FF10.0001: input: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0001:05:00.0-3.4/input0
[ 4.021330] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0001:00/0001:00:00.0/0001:01:00.0/0001:02:02.0/0001:05:00.0/usb1/1-3/1-3.4/1-3.4:1.1/0003:046B:FF10.0002/input/input1
[ 4.021363] hid-generic 0003:046B:FF10.0002: input: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0001:05:00.0-3.4/input1
[ 4.397492] scsi 4:0:0:0: CD-ROM AMI Virtual CDROM0 1.00 PQ: 0 ANSI: 0 CCS
[ 4.397684] scsi 4:0:0:0: Attached scsi generic sg4 type 5
[ 4.405848] sr 4:0:0:0: [sr0] scsi-1 drive
[ 4.405850] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.405958] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 4.717487] scsi 5:0:0:0: Direct-Access AMI Virtual HDisk0 1.00 PQ: 0 ANSI: 0 CCS
[ 4.718230] scsi 5:0:0:1: Direct-Access AMI Virtual HDisk1 1.00 PQ: 0 ANSI: 0 CCS
[ 4.718433] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 4.718599] sd 5:0:0:1: Attached scsi generic sg6 type 0
[ 4.722100] sd 5:0:0:0: [sde] Attached SCSI removable disk
[ 4.742348] sd 5:0:0:1: [sdf] Attached SCSI removable disk
[ 6.372277] tg3 0001:06:00.0 enP1p6s0f0: Link is up at 1000 Mbps, full duplex
[ 6.372283] tg3 0001:06:00.0 enP1p6s0f0: Flow control is on for TX and on for RX
[ 6.372288] tg3 0001:06:00.0 enP1p6s0f0: EEE is disabled
[ 6.372305] IPv6: ADDRCONF(NETDEV_CHANGE): enP1p6s0f0: link becomes ready
[ 6.641837] tg3 0001:06:00.1 enP1p6s0f1: Link is up at 1000 Mbps, full duplex
[ 6.641844] tg3 0001:06:00.1 enP1p6s0f1: Flow control is on for TX and on for RX
[ 6.641847] tg3 0001:06:00.1 enP1p6s0f1: EEE is disabled
[ 6.641862] IPv6: ADDRCONF(NETDEV_CHANGE): enP1p6s0f1: link becomes ready
[ 185.886513] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 185.888678] ata1.00: configured for UDMA/133
[ 186.386513] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 186.388733] ata2.00: configured for UDMA/133
[ 186.886506] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 186.888718] ata3.00: configured for UDMA/133
[ 187.386507] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 187.388735] ata4.00: configured for UDMA/133
[ 188.113351] IPv6: ADDRCONF(NETDEV_UP): enP1p6s0f0: link is not ready
[ 188.117289] device-mapper: table: 254:12: linear: Device lookup failed
[ 188.117291] device-mapper: ioctl: error adding target to table
[ 188.118333] device-mapper: table: 254:12: linear: Device lookup failed
[ 188.118334] device-mapper: ioctl: error adding target to table
[ 188.121479] device-mapper: table: 254:12: linear: Device lookup failed
[ 188.121481] device-mapper: ioctl: error adding target to table
[ 188.127891] device-mapper: table: 254:12: linear: Device lookup failed
[ 188.127893] device-mapper: ioctl: error adding target to table
[ 188.129097] device-mapper: table: 254:12: linear: Device lookup failed
[ 188.129099] device-mapper: ioctl: error adding target to table
[ 188.132312] device-mapper: table: 254:12: linear: Device lookup failed
[ 188.132315] device-mapper: ioctl: error adding target to table
[ 188.139205] device-mapper: table: 254:12: linear: Device lookup failed
[ 188.139207] device-mapper: ioctl: error adding target to table
[ 188.140072] device-mapper: table: 254:12: linear: Device lookup failed
[ 188.140073] device-mapper: ioctl: error adding target to table
[ 188.142725] device-mapper: table: 254:12: linear: Device lookup failed
[ 188.142727] device-mapper: ioctl: error adding target to table
[ 188.147913] device-mapper: table: 254:12: linear: Device lookup failed
[ 188.147915] device-mapper: ioctl: error adding target to table
[ 188.148643] device-mapper: table: 254:12: linear: Device lookup failed
[ 188.148645] device-mapper: ioctl: error adding target to table
[ 188.151119] device-mapper: table: 254:12: linear: Device lookup failed
[ 188.151120] device-mapper: ioctl: error adding target to table
[ 191.491208] tg3 0001:06:00.0 enP1p6s0f0: Link is up at 1000 Mbps, full duplex
[ 191.491215] tg3 0001:06:00.0 enP1p6s0f0: Flow control is on for TX and on for RX
[ 191.491220] tg3 0001:06:00.0 enP1p6s0f0: EEE is disabled
[ 191.491234] IPv6: ADDRCONF(NETDEV_CHANGE): enP1p6s0f0: link becomes ready
[ 528.206509] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 528.208737] ata1.00: configured for UDMA/133
[ 528.706512] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 528.708705] ata2.00: configured for UDMA/133
[ 529.206507] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 529.208652] ata3.00: configured for UDMA/133
[ 529.706513] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 529.708724] ata4.00: configured for UDMA/133
[ 530.209173] IPv6: ADDRCONF(NETDEV_UP): enP1p6s0f0: link is not ready
[ 530.212955] device-mapper: table: 254:12: linear: Device lookup failed
[ 530.212958] device-mapper: ioctl: error adding target to table
[ 530.214217] device-mapper: table: 254:12: linear: Device lookup failed
[ 530.214220] device-mapper: ioctl: error adding target to table
[ 530.217544] device-mapper: table: 254:12: linear: Device lookup failed
[ 530.217546] device-mapper: ioctl: error adding target to table
[ 530.223007] device-mapper: table: 254:12: linear: Device lookup failed
[ 530.223010] device-mapper: ioctl: error adding target to table
[ 530.223967] device-mapper: table: 254:12: linear: Device lookup failed
[ 530.223968] device-mapper: ioctl: error adding target to table
[ 530.226864] device-mapper: table: 254:12: linear: Device lookup failed
[ 530.226866] device-mapper: ioctl: error adding target to table
[ 530.233091] device-mapper: table: 254:12: linear: Device lookup failed
[ 530.233094] device-mapper: ioctl: error adding target to table
[ 530.234076] device-mapper: table: 254:12: linear: Device lookup failed
[ 530.234078] device-mapper: ioctl: error adding target to table
[ 530.237244] device-mapper: table: 254:12: linear: Device lookup failed
[ 530.237246] device-mapper: ioctl: error adding target to table
[ 530.243572] device-mapper: table: 254:12: linear: Device lookup failed
[ 530.243575] device-mapper: ioctl: error adding target to table
[ 530.244291] device-mapper: table: 254:12: linear: Device lookup failed
[ 530.244292] device-mapper: ioctl: error adding target to table
[ 530.246588] device-mapper: table: 254:12: linear: Device lookup failed
[ 530.246590] device-mapper: ioctl: error adding target to table
[ 533.685341] tg3 0001:06:00.0 enP1p6s0f0: Link is up at 1000 Mbps, full duplex
[ 533.685348] tg3 0001:06:00.0 enP1p6s0f0: Flow control is on for TX and on for RX
[ 533.685354] tg3 0001:06:00.0 enP1p6s0f0: EEE is disabled
[ 533.685369] IPv6: ADDRCONF(NETDEV_CHANGE): enP1p6s0f0: link becomes ready
[ 688.206510] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 688.208725] ata1.00: configured for UDMA/133
[ 688.706514] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 688.708727] ata2.00: configured for UDMA/133
[ 689.206507] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 689.208704] ata3.00: configured for UDMA/133
[ 689.706512] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 689.708730] ata4.00: configured for UDMA/133
[ 690.205949] IPv6: ADDRCONF(NETDEV_UP): enP1p6s0f0: link is not ready
[ 690.210179] device-mapper: table: 254:12: linear: Device lookup failed
[ 690.210182] device-mapper: ioctl: error adding target to table
[ 690.211241] device-mapper: table: 254:12: linear: Device lookup failed
[ 690.211244] device-mapper: ioctl: error adding target to table
[ 690.214641] device-mapper: table: 254:12: linear: Device lookup failed
[ 690.214646] device-mapper: ioctl: error adding target to table
[ 690.222445] device-mapper: table: 254:12: linear: Device lookup failed
[ 690.222448] device-mapper: ioctl: error adding target to table
[ 690.223601] device-mapper: table: 254:12: linear: Device lookup failed
[ 690.223603] device-mapper: ioctl: error adding target to table
[ 690.226803] device-mapper: table: 254:12: linear: Device lookup failed
[ 690.226805] device-mapper: ioctl: error adding target to table
[ 690.233160] device-mapper: table: 254:12: linear: Device lookup failed
[ 690.233162] device-mapper: ioctl: error adding target to table
[ 690.233997] device-mapper: table: 254:12: linear: Device lookup failed
[ 690.233998] device-mapper: ioctl: error adding target to table
[ 690.236478] device-mapper: table: 254:12: linear: Device lookup failed
[ 690.236480] device-mapper: ioctl: error adding target to table
[ 690.243208] device-mapper: table: 254:12: linear: Device lookup failed
[ 690.243210] device-mapper: ioctl: error adding target to table
[ 690.244173] device-mapper: table: 254:12: linear: Device lookup failed
[ 690.244174] device-mapper: ioctl: error adding target to table
[ 690.246669] device-mapper: table: 254:12: linear: Device lookup failed
[ 690.246671] device-mapper: ioctl: error adding target to table
[ 693.682265] tg3 0001:06:00.0 enP1p6s0f0: Link is up at 1000 Mbps, full duplex
[ 693.682272] tg3 0001:06:00.0 enP1p6s0f0: Flow control is on for TX and on for RX
[ 693.682277] tg3 0001:06:00.0 enP1p6s0f0: EEE is disabled