oh2th / com.sensibo Goto Github PK

Can you also add support for the Capability ‘Motion’ for the ‘Device: Sensibo Room Sensor’?
And also the following flows (taken from a motion device from Aeotec):

WHEN:

Motionalarm activated.
Motionalarm inactivated.
AND:

Motionalarm is on.

Is it possible to add a extra THEN card:
set power state to ON or OFF (without turning the unit actually on or off)
Actually it is the power sync option which is also in the APP.

I hope this is possible.....

Thx.

Hello,

I’m using the latest Beta version, sometimes when I turn on the device trough the official app the Sensibo Homey app doesn’t recognize the state of the device.

Here is my diagnostic report code:
6dcea574-d413-40fa-a7e7-d282cff8742b

Thanks,
Idan

are you able to please add an AND flow card for "Temperature below / above"

im trying to setup some morning flows eg at 6am, AND if temperature is below turn on heating

thanks

since a short time the action card ‘climate react on (or off)’ does not work anymore in the flow. All other actions are still fine.

Is your feature request related to a problem? Please describe.
Currently there's no timeline support.

Describe the solution you'd like
On the right side of the device there's timeline option. I'd like to see the (at least On/Off) events.

Describe alternatives you've considered
If possible add more event exp. Heating/Cooling or target temperature changes.

Additional context
This is Athom video about the feature.
https://www.youtube.com/watch?v=v7GTohGzzro

Hello,

Since last update I have a problem with the "Set Timer" card.

When Homey launch the card I have this error :

Can you take a look ?

Thank you

Hello! :-)
Thank you for making this Homey-app!

I was wondering if it was possible to add «fan mode» to the selection of temperature modes in the app?

As many other Norwegians I use my heat pump as a fan to circulate the air when lighting a fire in the fireplace. It is a very good way of distributing the air around the house.

I know Sensibo Air can give my heat pump a signal for fan mode, please see the attached screenshot of the Sensibo app. I don’t have the expertise as you do though, so I don’t know if it is possible.

To have the opportunity of fan mode would be greatly appreciated.

Please reach out if you decide it is a feature that you would like to try implementing, or if I can help you with anything.

Best wishes,
Andy.

API Limit exceeded. Use "Accept-Encoding: gzip" to increase the rate limit.

Sensibo has now released DISPLAY LIGHT. Would be nice to have that implemented in Homey too.

I have a Sensibo Air + Room Sensor but I can´t use the room sensor within Homey. The only option I got is the main unit. Are there any plans for supporting this in the near future?

Thanks,
bnorheim

Hey,

Thanks for an awesome app, could you please add this fan state?

"fanLevel": "medium_high"

Also wonder if you could add this state in a similar way as swing?

"horizontalSwing"
Example -> "horizontalSwing": "fixedLeft"

I can help you and give the different horizontal swings on my unit if you want?

Thanks again

I like being able to see when someone has changed the set temp, but I can't find a way to see when someone changes the mode. It would be nice if this was recorded in the insights graphs or on the log page of the device.

Describe the bug
Since the update to version 1.17.3 this morning around 11:00h my Sensibo Sky is not reporting any temperature changes anymore. The temp changes are visible in the Sensibo app, but since the update the temp hasn't changed in Homey, not even 0,1 degree. Other temp sensors (non-Sensibo) in the same room do report temp changes. Could this be some regression introduced in the new version?

To Reproduce
Steps to reproduce the behavior:
No steps necessary. Even restarting the Sensibo app doesn't change things.

Expected behavior
Temp changes measured by Sensibo and as reported in the official Sensibo app to be displayed in the Homey Sensibo device.

Screenshots
Not applicable

App (please complete the following information):

• Live version
• Installed version: 1.17.3

Desktop (please complete the following information):
Irrelevant

Smartphone (please complete the following information):
Irrelevant

Additional context
None

Describe the bug
New to Homey Pro. Have 3 Sensibo Sky remotes which was easy to install. The issue is with the Temp. will not set and always resets to 86. It makes the Sensibo app change temp to 50 then have to use Sensibo app to adjust temp

To Reproduce
Steps to reproduce the behavior:

1. Set Temp 72 in developer app or in Homey App
2. In Sensibo app Temp gets set to 50
3. Will reset back to 86 in Homey
4. Sensibo does not change back to the original 72 that it was set to

Expected behavior
A clear and concise description of what you expected to happen.

Screenshots
If applicable, add screenshots to help explain your problem.

Always resets to 86

App (please complete the following information):

• Test or Live version: Homey Pro 10.3.4
• Installed version: Sensibo V1.7.5

Desktop (please complete the following information):

• OS: [e.g. iOS]
• Browser [e.g. chrome, safari]
• Version [e.g. 22]

Smartphone (please complete the following information):

• Device: [e.g. iPhone6]
• OS: [e.g. iOS8.1]
• Browser [e.g. stock browser, safari]
• Version [e.g. 22]

Additional context
Add any other context about the problem here.

Hi after install homey sensibo app work fine but 1 smttings not work i can't settings temperature ring. Can you fix this?

Hi the swing mode not working
is it normal or how can fix this?

Have entered correct API.

Not able to add new device. Suggestions?

Hello,

Right now the app is working great under the Flows,
But i want to control the AC manually from Homey device screen, so i will be able also to connect it to Homekit to controll it from siri or Google Assistant.

So, is it possible for you to add those actions to device screen?

Thanks,
Idan

Describe the bug
A clear and concise description of what the bug is.

To Reproduce
Steps to reproduce the behavior:

1. Go to '...'
2. Click on '....'
3. Scroll down to '....'
4. See error

Expected behavior
A clear and concise description of what you expected to happen.

Screenshots
If applicable, add screenshots to help explain your problem.

App (please complete the following information):

• Test or Live version: [e.g. Test]
• Installed version: [e.g. 2.2.2]

Desktop (please complete the following information):

• OS: [e.g. iOS]
• Browser [e.g. chrome, safari]
• Version [e.g. 22]

Smartphone (please complete the following information):

• Device: [e.g. iPhone6]
• OS: [e.g. iOS8.1]
• Browser [e.g. stock browser, safari]
• Version [e.g. 22]

Additional context
Add any other context about the problem here.

Hello
I am a beginner at Homey and need more information on how to proceed after installing the app.

Greetings
Joakim

In the Sensibo iOS app, I am able to set the room sensor (Sensibo Air) as the primary sensor, however, this appears not to be supported in the Homey app for Sensibo, where the "controller" (Sensibo Sky) automatically becomes the primary sensor, regardless of the settings in the Sensibo iOS app.

Is it possible to add a card allowing ON/OFF the air conditioning light.
This is an option available natively in Sensibo:

Thanks !

Hi,

My remote has the "Dry" mode which is present in sensibo app but not in homey app.

See attached pics.

Hope to see it avail in homey app

Thx

Hello

I am missing beeing able to start the fan level "Strong" directly from the Homey app. Funny thing is that this is possible if you are creating a flow. It si also possible directly its the Sensible at in IOS.

Se attached pics

I´m running on a homey 2019 and upgraded the homey to 10.0.9 when this error started to occur.

In a script i´m setting a number of features on my air heating device.

It can work on one feature like setting the temperature and then stop on the next feature when it sets the fan level. If i´m trying it manually and not in a script it behaves in the same way.

I have the latest app version

The behaviour is the same on both my Iphone 13 and Ipad Air.

Can you add support for Monitoring your batteries in Homey Energy – Homey Support for the ‘Device: Sensibo Room Sensor’?
The batteries are 2 x AAA, aka 2 x 1,5V.
So my “batteryVoltage”: 2490 must be 2490/3000=83%.

And also the following flows (taken from battery powered devices from Aeotec):

WHEN:

Battery is greater than %.
Battery is less than %.
Batterylevel change.

Is your feature request related to a problem? Please describe.
I'm always frustrated when [I turn off my AC by accident. It is so easy to do if you, are to fast, navigating in to adjust temp settings]

Describe the solution you'd like
Same as in vitual thermo app.
The possibility to diasble shut off.

Describe alternatives you've considered
None

Additional context
Add any other context or screenshots about the feature request here.

Can you also add two different settings for calibrating ‘temperature’ and ‘humidity’ for the ‘Device: Sensibo Room Sensor’?
In the Sensibo app its only possible to calibrate those values for the device '‘Device: Sensibo Air’, not for the ‘Device: Sensibo Room Sensor’.
I would like to be able to calibrate them with both plus and minus with one decimal.

Describe the bug
Cannot control AC with Sensibo Homey app. Get two different errors since afternoon 14th of April 2024

1. Error setting AC state (403 - Forbidden)
2. Error setting AC State (429 - Too many requests) .. Not 100% sure about the text here, but it was 429 for sure.

App (please complete the following information):
v1.17.5

Desktop (please complete the following information):
Homey Pro 2023

Additional context
Works fine on the Sensibo Android app, here I can controll the AC.
Also many others have the same issue at least here in Norway.
I also tried to make a new api key with https://home.sensibo.com/me/api , but did not make a difference.

Hello,
Thanks for the app for Homey.
Unfortunately this app is not working well with the Homey 2.0.
We can’t turn on/off the device and can’t know the state of the device.

Thanks,
Idan

Every 1-2 days I notice that when I turn on an AC with the Sensibo android app, the sensibo icon in my Homey app does not get updated. The weird thing is that it does not hold for all AC's: a few ACs won't update, but also a few ACs do update.

When I restart your Sensibo app in Homey, the problem is resolved.

The Homey App uses
Mode: "Auto"
Fan: "Strong"
Temp: "20c"

according to the API call:

Not sure if it takes the last known setting.
With the included remote control you can change multiple settings at once. If you not aim your remote to the unit, change FAN, aim your remote to the unit and change SWING, it will configure both with the same 'command'.

Would it be able to give in settings at the 'turn on' card that would allow for multiple settings at once?
The goal is to get the 'beeping' of the device to the minimum.

Many thanks for your efforts already!

Hi,
After creating an API-key in https://home.sensibo.com/me/api I try to add my Sensibo device in Homey - but all I get is the message "The API-key must be configured.". All I can do here is to click "Close". Any suggestions what to do? Thanks!