nlimper / mini-ap-v4 Goto Github PK

Hi @nlimper ,

since my AP v4 case had been delivered broken, I want to reprint the case myself. But It seems, that you did not yet share the .stl files for the v4 case yet. I could only find the v3 files.

Would be cool, if you could push them to this repo as well!

Best,
Timo

Bought the access points assembled about two month ago from https://www.tindie.com/products/electronics-by-nic/openepaperlink-mini-ap-v3-zigbee-wifi-gateway

But the display stopped working more than 3 weeks ago, but not had the time to look into it.

After boot there is only backlight on the screen and the LED below it turns green and then starts pulsating. After a while it changes to a solid blue.

I can still access the access on its assigned ip address point but have lost connection to the tags (last seen 628 houte ago)

I then proceded to reset a tag (and gave it a new battery just to be sure) and it got it updating again - so the issue seems to just be the display

I assume that plastic can just be carefully broken apart to verify the inner connections ?