bash <(wget -qO- https://raw.githubusercontent.com/jerry048/Dedicated-Seedbox/main/Install.sh) -u <username> -p <password> -c <Cache Size(unit:MiB)> -q -l -b -v -r -3 -x -o
1. -u: username
2. -p: password
3. -c: Cache size for torrent client
4. -q: qBittorrent versions
5. -l: libtorrent versions
6. -b: Install autobrr
7. -v: Install vertex
8. -r: Install autoremove-torrents
9. -3: Enable BBR V3
10.-x: Enable BBRx
11. Customize ports
bash <(wget -qO- https://raw.githubusercontent.com/jerry048/Dedicated-Seedbox/main/Install.sh) -u jerry048 -p 1LDw39VOgors -c 3072 -q 4.3.9 -l v1.2.19 -b -v -r -3
1. username is jerry048
2. password is 1LDw39VOgors
3. Cache size is 3GB
4. Install qBittorrent 4.3.9 - libtorrent-v1.2.19
5. Install autobrr
6. Install vertex
7. Install autoremove-torrents
8. Enable BBR V3
1. OS
1. Debian 10+
2. Ubuntu 20.04+
2. CPU Architecture
1. x86_64
2. ARM64
1. qBittorrent
2. autobrr
3. vertex
4. autoremove-torrents
CPU Optimization
Network Optimization
Kernel Values
Drive Optimization
BBRv3 or BBRx
-
The Cache size should be set to around 1/4 of the machine total available ram. In case you opt for qBittorrent 4.3.x, you need to take account into memory leakage and set it to 1/8.
-
aio_threads default setting is 4 and should be good for HDD. For SSD or even NVMe server, you might consider increase it to 8 or even 16.
- For qBittorrent 4.3.x - 4.6.x you can change it in the advance setting tab.
- For qBittorrent 4.1.x, you can set it in /home/$username/.config/qBittorrent/qBittorrent.conf by adding
Session\AsyncIOThreadsCount=8
under [BitTorrent] section- Please shut down qBittorrent before the editing
- For Deluge, you can install ltconfig and edit through the plugins
- aio_threads=8
-
send_buffer_low_watermark, send_buffer_watermark & send_buffer_watermark_factor can be set to a lower value if you are running on a machine with poor I/O.
- For qBittorrent 4.3.x you can change it in the advance setting tab.
- For qBittorrent 4.1.x, you can set it in /home/$username/.config/qBittorrent/qBittorrent.conf by adding
Session\SendBufferWatermark=5120
,Session\SendBufferLowWatermark=1024
andSession\SendBufferWatermarkFactor=150
under [BitTorrent] section- Please shut down qBittorrent before the editing
- For Deluge, you can install ltconfig and edit through the plugins
- send_buffer_low_watermark=1048576
- send_buffer_watermark=5242880
- send_buffer_watermark_factor=150
-
tick_internal default setting is 100 which can be too high for some weaker CPU. Consider changing it to 250 or 500.
- Sadly there is no way to change this setting in qBittorrent
- For Deluge, you can install ltconfig and edit through the plugins
- tick_interval=250
-
A little bit more fine tunning notes can also be found in /etc/sysctl.conf
-
For file system, I highly recommend using XFS
qBittorrent Install - https://github.com/userdocs/qbittorrent-nox-static
qBittorrent Password Set - https://github.com/KozakaiAya/libqbpasswd & https://amefs.net/archives/2027.html
Deluge Password Set - https://github.com/amefs/quickbox-lite
autoremove-torrents - https://github.com/jerrymakesjelly/autoremove-torrents
BBR Install - https://github.com/KozakaiAya/TCP_BBR