nickn17 / evdash Goto Github PK
View Code? Open in Web Editor NEWEV dashboard - software for small dev boards connected to the car via obd2 BLE4 or CAN bus.
Home Page: https://discord.gg/cNJsSE2NXe
License: MIT License
EV dashboard - software for small dev boards connected to the car via obd2 BLE4 or CAN bus.
Home Page: https://discord.gg/cNJsSE2NXe
License: MIT License
I have a Kona 2020 64kw and to be able to select this vehicule, I need to chose the Kona 2020 39kw. When I choose the 64kw version, the select button do nothing.
Personal experience shows IONIQ 5 is not identifying when charging, reports in Discord suggest same exists for EV6.
Posting this to track this as an issue and open discussion for potential remedy.
Quick triage of the issue myself using data from https://github.com/Esprit1st/Hyundai-Ioniq-5-Torque-Pro-PIDs suggests that there are atleast 3 data points for charging:
000_HV_Charging,Charging,0x220101,{j:7},0,1,,7E4
000_Normal Charge Port,AC Plug,0x220101,{j:5},0,1,,7E4
000_Rapid Charge Port,CCS Plug,0x220101,{j:6},0,1,,7E4
My limited CAN hacking might be to blame here, but this data, suggests that bits 5 and 6 are used for identifying AC (5) and DC (6) Charging.
Referring to the following code snippet
evDash/src/CarHyundaiIoniq5.cpp
Lines 415 to 424 in 0f283cc
It appears that this may be correctly identified, but it is polling 220105 instead of 220101.
Unfortunately my previous attempts to compile this code have failed, limiting my testing ability, so presently I can only post issue for review.
This calculation seems to be inaccurate on the pure models.
Line 315 in ad4c152
Also, batModuleTempCount is 16 and cellCount is 96 on the pure model.
Basically vw just removed one battery module from the 58/62kwh version.
I can go to the Units menu to change tire pressure, but it's always keeping BAR.
I use the last version publish March 28, 2021.
Nezobrazuje sa mi aktualny tlak a teplota v pneumatikach. Mam poslednu verziu z decembra v2.2.0 2020-12-12, ostatne funkciu idu OK.
BLuet. mam tebou odporucany, Auto je to iste co mas ty :-)
Dakujem Lubos za tvoju reakciu.
Este jeden navrh na vylepsenie mam, doplnit k grafom o nabyjani informaciu od ktorej teploty plati ktory graf.
Prikladam moj navrh umiestnenia informacie.(teploty som si presne nepamatal su iba orientacne)
It would be nice to have the version number somewhere, maybe on the middle button, like top right or bottom right, or maybe even separate menu that also contains release notes, or both.
My M5Stack with v2.2.0 2020-12-12 works without problem with BLE, until I activate sdcard. When I activate sdcard, the BLE keeps connecting and no connect.
Video with the problem -> https://www.youtube.com/watch?v=bywRsBJp_Xc
It is posible to read out SOC and SOH from a VW E-golf
In Canada i don't une BAR for tire pressure. Is it possible to add an option to display tire in psi.
Is it possible to add Kona EV in vehicule list.
Touch screen is not working using the last version compiled with Visual Code and platformio
Can someone tell me which is the latest Tag running on TTGO T4? The current Master is too big to get flashed. After removal 2 car vendors (I only need ID3) from Source I can flash but after flash with ttgo build target I only have a red display and serial console works. The ttgo build target only build when set a pin for GSM modem.
Maybe the GSM Modem can be made optional by compiler flag? I tried to remove all occurrences with own compiler flags, but without deep knowledge of code I always run into crash loops after flashing
I know that ttgo is no longer supported but I only search for a simple solution to show the battery temperature of my car somehow and the ttgo I already have in my hobby box. I tried to build older Tags but these doesn’t work as well.
thanks for any hint.
MEB cars have constant meter flaw, instrumentation shows +3km/h in comparison to GPS with all speeds.
Do we want to collect the number shown in the instruments or the real value?
Line 327 in 5f851ea
Just installed Evdash, but the version number says 1.8.3b? Should it not be 2.2.0?
Hi! I am trying to connect to my Viecar dongle, but after selecting it from the list the m5stack reboots and scans BLE again, is this because I dont have the battery on the m5stack? or because my dongle is not supported?
Unknown Service
UUID: 49535343-fe7d-4ae5-8fa9-9fafd205e455
PRIMARY SERVICE
Unknown Characteristic
UUID: 49535343-6daa-4d02-abf6-19569aca69fe Properties: READ, WRITE
Unknown Characteristic
UUID: 49535343-aca3-481c-91ec-d85e28a60318
Properties: NOTIFY, WRITE
Descriptors:
Client Characteristic Configuration UUID: 0x2902
Minor issue. 2020 e-Niro
So open driver door (on the right) and the yellow indicator appears on the left of the device.
Not sure if this RHD/LHD info is even available from the car. If not, maybe a flag/preference under Settings could work
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.