# Most Get-* cmdlets implement a -Strict parameter which applies strict name checking. Where possible, the default is to perform wildcard lookups on submitted parameters.

Store-B1CSPAPIKey -APIKey "longapikeystringgoeshere" -Persist
  Stores API Key for BloxOne within environment variables. Using -Persist will persist those credentials for that user on that machine.

Get-B1CSPAPIKey
  Retrieves the stored API Key for ibPS to communicate with the BloxOne Cloud

Get-B1CSPUrl
  Retrieves the currently set CSP URL for ibPS to communicate with the BloxOne Cloud

Set-B1CSPUrl -Region EU
  Updates the CSP URL to a new region

Get-B1AuditLog -Limit "25" -Offset "0" -Username "[email protected]" -Method "POST" -Action "Create" -ClientIP "1.2.3.4" -ResponseCode "200"
  Retrieves a listing of all audit logs, optionally limiting the number of results by using an offset or the various filters.

Get-B1ServiceLog -OnPremHost "bloxoneddihost1.mydomain.corp" -Container "DNS" -Start (Get-Date).AddHours(-2)
  Retrieves service related logs. Container options include DNS, DHCP, NTP, DFP, Host, Kube & NetworkMonitor.

Get-B1SecurityLog -Limit "25" -Offset "0" -Username "[email protected]" -App "nginx" -Type "nginx.access" -Domain "prod.mydomain.corp"
  Retrieves CSP security logs, optionally limiting the number of results by using an offset or the various filters.

Get-B1DNSLog -Source "10.177.18.35" -Query "google.com" -Type "A" -Response "216.58.201.110" -Start (Get-Date).AddHours(-6) -End (Get-Date) -Limit 100 -Offset 0
  Retrieves all DNS logs from BloxOneDDI with various filter options.

Get-B1DNSEvent -Start (Get-Date).AddDays(-7) -AppName iCloud -FeedName Public_DOH -ThreatIndicator mask.icloud.com -Response NXDOMAIN
  Retrieves DNS queries which have triggered an event based on a security policy

Get-B1DFPLog -Source "10.177.18.35" -Query "google.com" -Type "A" -Response "216.58.201.110" -Start (Get-Date).AddHours(-6) -End (Get-Date) -Limit 100 -Offset 0
  Retrieves all DNS Forwarding Proxy logs from BloxOneDDI with various filter options.
  
Get-B1DHCPLog -Hostname "dhcpclient.mydomain.corp" -State "Assignments" -IP "10.10.10.100" -Protocol "IPv4 Address" -DHCPServer "bloxoneddihost1.mydomain.corp" -Start (Get-Date).AddHours(-24) -End (Get-Date) -Limit 100 -Offset 0
  Retrieves all DHCP logs from BloxOneDDI with various filter options.

Get-B1Space -Name "Global"
  Retrieves a listing of all BloxOne Spaces or a single result when using -Name

Get-B1AddressBlock -Subnet "10.10.100.0/12" -Space "Global"
  Retrieves a listing of all BloxOne Address Blocks, optionally filtering by Subnet and Space.

Get-B1AddressBlockNextAvailable -ParentAddressBlock 10.0.0.0/8 -Space Global -SubnetCIDRSize 24 -SubnetCount 5
  Retrieves X number of next available address blocks for creation

Get-B1Subnet -Subnet "10.10.100.0"
  Retrieves a listing of all BloxOne Subnets or a single result when using -Subnet. The subnet should be used without the CIDR suffix.

Get-B1Range -StartAddress "10.10.100.200" -EndAddress "10.10.100.250"
  Retrieves a listing of all DHCP Ranges, optionally filtering by using the -StartAddress or -EndAddress parameter.
  
Get-B1Address -Address "10.0.0.1" -Reserved -Fixed
  Retrieves a list of addresses from IPAM, optionally filtering by -Address or the -Reserved & -Fixed flags.

Get-B1HAGroup -Name "MyHAGroup"
  Retrieves a listing of all DHCP HA Groups, or a single result when using the optional -Name parameter.
  
Get-B1Host -Name "bloxoneddihost1.mydomain.corp" -IP "10.10.10.10" -OPHID "OnPremHostID" -Space "Global" -Limit "100" -Status "degraded" -Detailed
  Retrieves a listing of all registered On-Prem hosts within BloxOne, optionally filtering by using the -Name or -IP parameters. A bespoke switch exists (-BreakOnError) which breaks out of the script upon errors.
  Using -Detailed returns service health information and allows returning more than 101 results, which is configurable via the -Limit parameter.
  
Get-B1BootstrapConfig -Name "bloxoneddihost1.mydomain.corp"
  Retrieves On Prem Host bootstrap config (Network/NTP/etc.)

Get-B1DNSConfigProfile -Name "Edge Profile"
  Retrieves a lsiting of all DNS Configuration Profiles, optionally filtering by using the -Name parameter.

Get-B1DHCPConfigProfile -Name "Edge Profile"
  Retrieves a lsiting of all DHCP Configuration Profiles, optionally filtering by using the -Name parameter.

Get-B1DHCPHost -Name "bloxoneddihost1.mydomain.corp" -IP "10.10.10.10"
  Retrieves a listing of all BloxOne appliances with DHCP Enabled, optionally filtering by using the -Name or -IP parameters.

Get-B1DNSHost -Name "bloxoneddihost1.mydomain.corp" -IP "10.10.10.10"
  Retrieves a listing of all BloxOne appliances with DNS Enabled, optionally filtering by using the -Name or -IP parameters.

Get-B1Tag -Name "siteCode"
  Retrieves a listing of all BloxOne Tags, optionally filtering by using the -Name parameter.

Get-B1DNSView -Name "Global"
  Retrieves a listing of all BloxOne DNS Views, optionally filtering by using the -Name parameter.

Get-B1DNSACL -Name "Secure_Subnets"
  Retrieves a listing of all BloxOne DNS ACLs, optionally filtering by using the -Name parameter.

Get-B1ForwardZone -FQDN "prod.mydomain.corp"
  Retrieves a listing of all BloxOne Forward DNS Zones, optionally filtering by using the -FQDN parameter.

Get-B1AuthoritativeZone -FQDN "prod.mydomain.corp"
  Retrieves a listing of all BloxOne Authorative DNS Zones, optionally filtering by using the -FQDN parameter.

Get-B1DelegatedZone -FQDN "prod.mydomain.corp"
  Retrieves a listing of all BloxOne Delegated DNS Zones, optionally filtering by using the -FQDN parameter.

Get-B1DHCPOptionCode -Name "routers"
  Retrieves a listing of all DHCP option codes, optionally filtering by using the -Name parameter.

Get-B1DHCPOptionGroup -Name "Printers Group"
  Retrieves a listing of all DHCP option groups, optionally filtering by using the -Name parameter.

Get-B1DHCPOptionSpace -Name "Printers Space"
  Retrieves a listing of all DHCP option spaces, optionally filtering by using the -Name parameter.

Get-B1DHCPGlobalConfig
  Gets the Global DHCP configuration of BloxOneDDI

Get-B1Record -Type A -Name "ns2" -rdata "10.10" -Zone "prod" | ft name_in_zone,absolute_zone_name,dns_rdata,ttl,type
  Retrieves a listing of all DNS records, optionally filtering by -Type and -rdata parameters.
  
Get-B1FixedAddress -IP 10.10.100.12
  Retrieves a list of DHCP Fixed Addresses
  
Get-B1AuthoritativeNSG -Name "Data Centre"
  Retrieves a listing of all Authorative Name Server Groups, optionally filtering by the -Name parameter.
  
Get-B1ForwardNSG -Name "Azure Wire IP"
  Retrieves a listing of all Forward Name Server Groups, optionally filtering by the -Name parameter.

Get-B1DHCPLease -Address "10.10.50.222" -MACAddress "01:02:ab:cd:ef:34:56" -Hostname "workstation1.prod.mydomain.corp" -Space "Global"
  Retrieves a listing of all DHCP Leases, optionally filtering by Address/MAC/Hostname/etc.

Get-B1DNSUsage -Address "10.10.50.222" -Space "Global"
  A useful command to return any records associated with a particular IP.

Get-B1DFP -Name "My DFP" -Strict
  Query a list of DNS Forwarding Proxies and its resolver configuration
  
Get-B1HealthCheck -ApplicationHealth
  Retrieves health for on-prem hosts
  
Get-B1Applications
  Retrieves a list of supported service types

Get-B1APIKey -Name "servicekeyname" -CreatedBy "[email protected]"
  Retrieves a list of API Keys configured within the BloxOne Cloud

Get-B1UserAPIKey
  Retrieves a list of interactive API Keys configured for your user within the BloxOne Cloud

Get-B1Service -Name "dns_bloxoneddihost1.mydomain.corp"
  Retrieves a list of deployed BloxOneDDI Services
  
Start-B1Service -Name "dns_bloxoneddihost1.mydomain.corp"
  Starts a BloxOneDDI Service

Stop-B1Service -Name "dns_bloxoneddihost1.mydomain.corp"
  Stops a BloxOneDDI Service
  
Get-B1GlobalNTPConfig
  Gets the global NTP Configuration defined within BloxOneDDI
  
Get-B1NTPServiceConfiguration
  Retrieves the NTP Configuration for an NTP Service
  
Get-B1TopMetrics -TopQueries DFP -TopCount 50 -Start (Get-Date).AddDays(-1)
  Query top metric templates. -TopQueries can be used with the -QueryType parameter and -TopClients can be used with the -TopClientLogType parameter.

Get-B1TDTideFeeds
  Query a list of TIDE Feeds (Custom RPZ)

Get-B1TDTideInfoRank -Domain "amazonaws.com" -Strict
  Queries the InfoRank list

Get-B1TDTideThreatClass -id "Bot"
  Queries a list of TIDE Threat Classes

Get-B1TDTideThreatClassDefaultTTL
  Queries the default TTL of TIDE Threat Classes

Get-B1TDTideThreatCounts
  Queries a list of threat counts, optionally choosing -Historical

Get-B1TDTideThreatEnrichment -Type Mandiant -Indicator "amazon.com"
  Queries the TIDE Threat Enrichment API

Get-B1TDTideThreatProperty -Name "CamelCase" -ThreatLevel 100
  Queries a list of threat properties from the TIDE API

Get-B1TDTideThreats -Hostname eicar.co
  Queries a list of threats from the TIDE API

Get-B1TDTideDataProfile -Name "My Profile"
  Query a list of TIDE Data Profiles with the option to filter by Name
  
Get-B1TDLookalikeDomains -Domain microsoft.com
  Query a list of lookalike domains (API Endpoint: /lookalike_domains)
  
Get-B1TDLookalikes -Domain google.com -Reason "phishing"
  Query a list of lookalike domains (API Endpoint: /lookalikes)

Get-B1TDLookalikeTargets
  Query a list of lookalike target domains (Global Lookalike Target List)

Get-B1TDLookalikeTargetCandidates
  Query a list of lookalike target candidates (Global Lookalike Candidates List)

Get-B1TDContentCategory
  Query a list of content categories from BloxOne Threat Defense

Get-B1TDPoPRegion
  Query a list of BloxOne Threat Defense Points of Presence

Get-B1TDSecurityPolicy -Name "My Policy" -Strict
  Query a list of security policies from BloxOne Threat Defense

Get-B1TDSecurityPolicyRules -PolicyID 123456
  Query a list of security policy rules from BloxOne Threat Defense

Get-B1TDThreatFeeds
  Query a list of threat feeds from BloxOne Threat Defense

Get-B1TDDossierSupportedFeedback
  Query a list of supported feedback types for Dossier

Get-B1TDDossierSupportedSources -Target ip
  Query a list of supported sources for Dossier

Get-B1TDDossierSupportedTargets -Source mandiant
  Query a list of supported indicator types for Dossier

Get-B1TDDossierLookup -job_id 01234567-c123-4567-8912a-123456abcdef -Results
  Query a Dossier lookup job

Start-B1TDDossierLookup -Type host -Value eicar.co
  Starts a Dossier lookup job

New-B1TDTideDataProfile -Name "My Profile" -Description "My TIDE Data Profile" -RPZFeed "my-rpz-feed" -DefaultTTL $false
  Creates a new TIDE Data Profile

New-B1Service -Name "dns_bloxoneddihost1.mydomain.corp" -Host "bloxoneddihost1.mydomain.corp" -NTP -DNS -DHCP
  Deploys a new BloxOneDDI Service

New-B1AuthoritativeZone -FQDN "prod.mydomain.corp" -View "Global" -DNSHosts "bloxoneddihost1.mydomain.corp","bloxoneddihost2.mydomain.corp" -Description "Prod Zone"
  Creates a new Authorative DNS Zone within BloxOne.
  
New-B1ForwardZone -FQDN "prod.mydomain.corp" -View "Global" -Forwarders "10.10.10.20","10.20.10.20" -DNSHosts "bloxoneddihost1.mydomain.corp","bloxoneddihost2.mydomain.corp" -Description "Prod Zone"
  Creates a new Forward DNS Zone within BloxOne.

New-B1Subnet -Subnet "10.10.100.0" -CIDR "24" -Space "Global" -Name "Prod Subnet" -HAGroup "MyHAGroup" -Description "Prod Subnet" -DHCPOptions @(@{"type"="option";"option_code"=(Get-B1DHCPOptionCode -Name "routers").id;"option_value"="10.10.100.1";})
  Creates a new subnet within BloxOne, with the option of attaching it to a DHCP HA Group and specifying one or more DHCP options to be applied at a subnet level. -DHCPOptions accepts an array and option codes can be found using the Get-B1DHCPOptionCode Cmdlet.

New-B1AddressBlock -Subnet "10.30.0.0" -CIDR "20" -Space "Global" -Name "Test" -Description "Test Subnet" -DHCPOptions @(@{"type"="option";"option_code"=(Get-B1DHCPOptionCode -Name "domain-name-servers").id;"option_value"="10.30.2.10,10.30.2.11";})
  Creates a new Address Block within BloxOne, with the option of specifying one or more DHCP options to be applied at a Address Block level. -DHCPOptions accepts an array and option codes can be found using the Get-B1DHCPOptionCode Cmdlet.

New-B1HAGroup -Name "MyHAGroup" -Space "Global" -Mode "active-passive" -PrimaryNode "bloxoneddihost1.mydomain.corp" -SecondaryNode "bloxoneddihost2.mydomain.corp" -Description "DHCP HA Group"
  Creates a new DHCP HA Group within BloxOne. Modes can include "active-active" or "active-passive". In Active/Passive, the -SecondaryNode parameter becomes the passive node.

New-B1Host -Name -Name "bloxoneddihost3.mydomain.corp" -Space "Global" -Description "Infra Node A"
  Creates a host within BloxOne.

New-B1Range -Name "Client Range" -StartAddress "10.250.20.20" -EndAddress "10.250.20.100" -Space "Global" -Description "Range for Client IPs"
  Creates a new DHCP range within a configured subnet. The appropriate subnet is identified by the Start/End addresses used.

New-B1AddressReservation -Address "10.0.0.1" -Name "MyReservedHost" -Description "My Reserved Host" -Space "Global"
  Creates an IP Reservation within IPAM. This is not a DHCP Reservation, see fixed addresses for that.
  
New-B1DHCPConfigProfile -Name "Profile Name" -Description "Profile Description" -DHCPOptions @() -DDNSZones "prod.mydomain.corp","100.10.in-addr.arpa"
  Creates a new DHCP Config Profile, optionally specifying DHCP Options & permitted DDNS Zones.

New-B1Record -Type "A" -Name "myrecord" -Zone "prod.mydomain.corp" -rdata "10.1.1.10" -TTL "60" -CreatePTR $false -Description "My Server"
  Creates a new DNS record. Use the -TTL parameter to override the TTL of the parent DNS Zone and -CreatePTR can be set to $false if you don't want PTRs automatically creating.
  
New-B1FixedAddress -IP "10.10.1.10" -Name "New fixed address" -Description "Description for new fixed address" -MatchType mac -MatchValue "ab:cd:ef:ab:cd:12" -Space Global -Tags @{"environment"="production"}
  Retrieves a list of DHCP Fixed Addresses

New-B1APIKey -Name "serviceapikey" -Type Service -UserName "svc-account-name"
  Creates a new API Key in the BloxOne Cloud and returns the key

Remove-B1Record -Type "A" -Name "myrecord" -Zone "prod.mydomain.corp"
  Removes a DNS record.
  
Remove-B1FixedAddress -IP 10.12.2.200 -Space Global
  Removes a fixed address

Remove-B1AuthoritativeZone -FQDN "mysubzone.mycompany.corp" -View "default"
  Removes an authoritative dns zone
  
Remove-B1ForwardZone -FQDN "myforwardzone.mycompany.corp" -View "default"
  Removes a forward dns zone

Remove-B1AddressReservation -Subnet "10.0.0.1" -CIDR "24" -Space "Global"
  Removes an IP Reservation from IPAM. This is not a DHCP Reservation, see fixed addresses for that.

Remove-B1AddressBlock -Subnet "10.0.0.1" -CIDR "24" -Space "Global"
  Removes an Address Block from IPAM.

Remove-B1Subnet -Subnet 10.0.0.1 -CIDR 24 -Space "Global"
  Removes a Subnet from IPAM.

Remove-B1Host -Name "bloxoneddihost1.mydomain.corp"
  Removes a host from within BloxOne.

Revoke-B1DNSConfigProfile -Hosts "bloxoneddihost1.mydomain.corp","bloxoneddihost2.mydomain.corp"
  Used to remove DNS Configuration Profiles from BloxOne hosts. The -Hosts parameter accepts a PSObject for long lists.

Revoke-B1DHCPConfigProfile -Hosts "bloxoneddihost1.mydomain.corp","bloxoneddihost2.mydomain.corp"
  Used to remove DHCP Configuration Profiles from BloxOne hosts. The -Hosts parameter accepts a PSObject for long lists.
  
Remove-B1Range -Start "10.250.20.20" -End "10.250.20.100"
  Used to remove a DHCP Range
  
Remove-B1Service -Name "dns_bloxoneddihost1.mydomain.corp" -Strict
  Used to remove a BloxOneDDI Service

Remove-B1TDSecurityPolicy -Name "My Policy"
  Used to remove BloxOne Threat Defense Security Policies

Remove-B1TDNetworkList
  Used to remove Network Lists from BloxOne Threat Defense

Set-B1Host -Name "bloxoneddihost1.mydomain.corp" -IP "10.10.20.11" -TimeZone "Europe/London" -Space "Global"
  Newly registered devices are given a random name which is updated when using the -IP and -Name parameters together. -IP is used to reference the object, -Name is used as the updated DNS Name. TimeZone and Space can also be configured using this cmdlet.

Set-B1AddressBlock -Subnet "10.10.100.0" -Name "MySupernet" -Space "Global" -Description "Comment for description" -DHCPOptions @(@{"type"="option";"option_code"=(Get-B1DHCPOptionCode -Name "domain-name-servers").id;"option_value"="10.10.10.10,10.10.10.11";})
  Used to update settings on an existing Address Block.

Set-B1Subnet -Subnet "10.10.10.0" -Name "MySubnet" -Space "Global" -Description "Comment for description" -DHCPOptions @(@{"type"="option";"option_code"=(Get-B1DHCPOptionCode -Name "router").id;"option_value"="10.10.10.1";})
  Used to update settings on an existing BloxOne Subnet.
  
Set-B1Range -StartAddress 10.250.20.20 -EndAddress 10.250.20.100 -Description -Tags @{"siteCOde"="12345"}
  Used to update settings associated with a DHCP Range

Set-B1Record -Type "A" -Name "test" -Zone "app1.prod.mydomain.corp" -rdata "10.10.100.225" -TTL "60" -Description "My App"
  Used to update the configuration of an existing DNS record.
  
Set-B1FixedAddress -IP "10.10.1.10" -Name "Updated name" -Description "Updated comment" -MatchType mac -MatchValue "12:23:45:ab:cd:12" -Space Global -Tags @{"environment"="test"}
  Used to update an existing fixed address.

Set-B1ForwardZone -FQDN "azurecr.io" -View "default" -Forwarders "10.10.10.10","10.20.20.20" -DNSHosts "bloxoneddihost1.mydomain.corp","bloxoneddihost2.mydomain.corp"
  Used to set DNS Forwarders / Hosts on an existing Forward Zone. -DNSServerGroups can optionally be used to apply a server group, but this will overwrite any existing Forwarders or DNS Hosts. (Generally desirable as they would be in the Group!)

Set-B1AuthoritativeZone -FQDN "prod.mydomain.corp" -View "default" -DNSHosts "bloxoneddihost1.prod.mydomain.corp","bloxoneddihost2.prod.mydomain.corp" -AuthNSGs "Data Centre" -Description "Production DNS Zone"
  Used to change the configuration of an existing Authoritative DNS Zone.

Set-B1ForwardNSG -Name "InfoBlox DTC" -AddHosts -Hosts "bloxoneddihost1.mydomain.corp","bloxoneddihost2.mydomain.corp"
  Used to change the configuration of an existing Forward Name Server Group. Primary use case is for adding/removing hosts from the group using -AddHosts or -RemoveHosts respectively.

Set-B1NTPServiceConfiguration -Name "ntp_bloxoneddihost1.mydomain.corp" -UseGlobalNTPConfig
  Used to set the NTP configuration for a particular service
  
Set-B1DHCPConfigProfile -AddDDNSZones -DDNSZones "prod.mydomain.corp","100.10.in-addr.arpa" -DNSView "default"
  Used for setting global DHCP configuration. Primarily for Adding/Removing internal DDNS Zones. -RemoveDDNSZones can be used to remove zones instead.

Set-B1DHCPGlobalConfig -AddDDNSZones -DDNSZones "prod.mydomain.corp","dev.mydomain.corp" -DNSView "default"
  Used for setting global DHCP configuration. Primarily for Adding/Removing internal DDNS Zones. -RemoveDDNSZones can be used to remove zones instead.

Set-B1TideDataProfile -Name "My Profile" -Description "My TIDE Data Profile" -RPZFeed "my-rpz-feed" -DefaultTTL $false -State "Activated"
  Updates an existing TIDE Data Profile. The -State parameter can be used to enable/disable the profile.

Set-B1APIKey -Name "mykey" -Type "interactive" -User "[email protected]" -State "Disabled"
  Used to update an existing API Key, such as enabling/disabling it.
	
Enable-B1OnPremHostApplication -Name "bloxoneddihost1.mydomain.corp" -DNS -DHCP -NTP
  Allows you to enable BloxOne On-Prem Host Applications using the DNS/DHCP/NTP switches

Disable-B1OnPremHostApplication -Name "bloxoneddihost1.mydomain.corp" -DNS -DHCP -NTP
  Allows you to Disable BloxOne On-Prem Host Applications using the DNS/DHCP/NTP switches
  
Grant-B1DNSConfigProfile -Name "Edge Profile" -Hosts "bloxoneddihost1.mydomain.corp","bloxoneddihost2.mydomain.corp"
  Used to add DNS Configuration Profiles to BloxOne hosts. The -Hosts parameter accepts a PSObject for long lists.

Grant-B1DHCPConfigProfile -Name "Edge Profile" -Hosts "bloxoneddihost1.mydomain.corp","bloxoneddihost2.mydomain.corp"
  Used to add DHCP Configuration Profiles to BloxOne hosts. The -Hosts parameter accepts a PSObject for long lists.
  
Set-B1DNSHost -Name "bloxoneddihost1.mydomain.corp" -DNSConfigProfile "Data Centre" -DNSName "bloxoneddihost1.mydomain.corp"
  Used to configure the DNS Config Profile and Critically the DNS Server Name.

Start-B1Export -Name "Backup" -Description "Backup of all CSP data" -DNSConfig -DNSData -IPAMData -KeyData -ThreatDefense -Bootstrap -OnPremHosts -Redirects -Tags
  Used to start a configuration export job. Can optionally also use -BackupAll instead of specifying all parameters.

Get-B1Export -data_ref "BloxOne Backup-1ed34a08-6806-4c17-9f94-6645521c0e23.json" -filepath "C:\temp\configuration.json"
  Used to save a configuration export job to disk. data_ref can be found by running Get-B1BulkOperation

Get-B1BulkOperation -id "1ed34a08-6806-4c17-9f94-6645521c0e23"
  Used to list all export/import operations, optionally filtering by id.
  
Search-B1 -Query "search term"
  Used to perform a global search of the BloxOneDDI Cloud Services Portal
  
Reboot-B1Host -OnPremHost "bloxoneddihost1.mydomain.corp" -NoWarning
  Used to reboot a BloxOneDDI Host

Deploy-B1Appliance -Name "bloxoneddihost1.mydomain.corp" -IP "10.10.100.10" -Netmask "255.255.255.0" -Gateway "10.10.100.1" -DNSServers "10.30.10.10,10.30.10.10" -NTPServers "time.mydomain.corp" -DNSSuffix "prod.mydomain.corp" -JoinToken "JoinTokenGoesHere" -OVAPath .\BloxOne_OnPrem_VMWare_v3.1.0-4.3.10.ova -vCenter "vcenter.mydomain.corp" -Cluster "CLUSTER-001" -Datastore "DATASTORE-001" -PortGroup "PORTGROUP" -PortGroupType "VDS"
  Used to deploy the BloxOne Virtual Appliance. Requires VMware PowerCLI to be installed. All parameters are mandatory. -PortGroupType can be Standard or VDS.

Store-NIOSCredentials -Credentials ${$CredentialObject} -Persist
  Stores NIOS Credentials encrypted, can be run without -Credentials parameter for it to prompt instead. The optional -Persist parameter will persist the credentials for that user on that machine. This requires a restart of the powershell session before credentials can be used.

Get-NIOSCredentials
  Retrieves stored NIOS Credentials

Set-NIOSConfiguration -Server gridmaster.domain.corp -APIVersion 2.10
  Used to set the Grid Master FQDN and/or API Version, optionally persisting using -Persist. The default API Version for WAPI is 2.12.
  This is useful to save having to enter the server address every time.

Get-NIOSConfiguration
  Retrieves stored NIOS Configuration, if available.

Get-NIOSAuthoritativeZone -Server gridmaster.domain.corp -View External -FQDN my-dns.zone
  Retrieves a list of authoritative zones from NIOS

Get-NIOSForwardZone -Server gridmaster.domain.corp -View External -FQDN my-dns.zone
  Retrieves a list of forward zones from NIOS

Get-NIOSDelegatedZone -Server gridmaster.domain.corp -View External -FQDN my-dns.zone
  Retrieves a list of delegated zones from NIOS

New-NIOSDelegatedZone -Server gridmaster.domain.corp -FQDN delegated.my-dns.zone -Hosts @(@{"address"="1.2.3.4";"name"="bloxoneddihost1.dev.mydomain.corp";},@{"address"="2.3.4.5";"name"="bloxoneddihost2.dev.mydomain.corp";}) -View External
  Used to create a new delegated zone within NIOS

Copy-NIOSSubzoneToBloxOne -Server gridmaster.domain.corp -Subzone my-dns.zone -NIOSView External -B1View my-b1dnsview -CreateZones -AuthNSGs "Core DNS Group" -Confirm:$false
  Used to copy/migrate Authoritative Subzones from NIOS to BloxOneDDI

Get-ibPSVersion
  Gets the ibPS Module Version