nccgroup / asatools Goto Github PK

We should document in tutorial.md how to have ret-sync working. Something along the lines:

The module request has no match in IDA because IDA can’t find any module with the right name gdb is aware of. To work around that, you need to rename your idb in the ret-sync window. By default, it is named “lina” as “[sync] default idb name: lina” points out but on the gdb side it is expecting “asa924-k8.bin|lina” to be the idb name.

You can either rename it manually in the ret-sync window in IDA or just create a “.sync” file in the same folder as “lina” and it will name it for you automatically:

[INTERFACE]
host=192.168.1.100
port=9100

[lina]
name=asa924-k8.bin|lina

in asatools/tutorial.md, subsection

https://github.com/nccgroup/asatools/blob/91b1e946f2eb8288cb956003614222a22d0895c4/tutorial.md#linux-network-setup

The document makes reference to a 'build_linux_bridge.sh', but this isn't provided anywhere in the repo.

A google for it only seems to reference this tutorial document.

my firmware is asav-941-200.qcow2, the version info are shown below:

of course, the 64 bit catches my eyes! I note this on my config all the time.
I enable the snmp, ikev1, ikev2, webvpn on asa by "Configuring a Cisco ASA test environment from ground zero" and "asadbg/config/", thanks a lot. I verified every service works well.



every thing is OK, I'm ready to use the poc. But, nothing happend. Do not crash. Why???