MCU: ARM Cortex-M7 STM32H743VI 480MHz with FDCAN bus
DCDC 5V current output rated at 5A max continuous and 6A max instantaneous
Voltage in: DC12V-DC24V
Logic voltage: DC 3.3V
Heated bed(HB) max current: 10A, heater cartridge(E0, E1) max current: 5.5A
Thermistor circuit is protected to prevent MCU damage from shorted heatbed and heater cartridge connection
Thermistor connection supports Pull up resistance value(1Kohm) setting using jumpers, No more extra module needed for PT1000(Accuracy is much lower than max31865)
Fan port: 3 X CNC(selectable voltage), 2 X always on(PSU voltage), max current: 1A per port
Selectable voltage (24V, 12V, 5V by SKR 3-DC MODE)for CNC fan (Note: The voltages of the 3 * CNC fans are unified, different voltages cannot be set separately for different ports), no more need for external stepdown
Thermistor connection supports Pull up resistance value(2.2Kohm, SKR 3 use 1Kohm, Within our working temperature range, the voltage change scale of 2.2k with PT1000 is more obvious, and the temperature collected under the same ADC accuracy is more accurate than 1K) setting using jumpers, No more extra module needed for PT1000(Accuracy is much lower than max31865)
Logic voltage: Stepper driver signal DC 5V
High and low voltage can be selected for all stepper driver by jumper
We appreciate all of your support to BIGTREETECH! To offer an excellent experience of creation to every makers,We’re devoted to design and produce high-quality and durable accessories!
How to contact:
If you have any technical issue,please don’t hesitate contact us: