Contact me :
Telegram : https://t.me/naz664
Instagram : https://instagram.com/naz_updates
Email : [email protected]
Script and patches for building PHH-Treble based crDroid GSI
Contact me :
Telegram : https://t.me/naz664
Instagram : https://instagram.com/naz_updates
Email : [email protected]
When mobile data is turned on, i can't access the internet, same with wifi
Tecno KG5P
Mt6765
Today i updates to CrDroid 9.6 and noticed that the sound from bluetooth does not work, I tried all the methods, but I only managed to display the headphones in the selection and on the sound panel
P.S On crdroid 9.5 audio works with pph settings + misc + "use system BT HAL" and with "use alternate way to detect headset"
Crdroid 9.9 always crashing when I try to run some games
Any game at all, it just freezes and reboots
Really uncomfortable
MT6765
Tecno Kg5p
Anytime the screen times out, turning it on again using the power button reproduces the problem, screen freezes,never responds to touches until i reboot
### FAILED APPLYING: /crDroid/patches/trebledroid/platform_bionic/02-Add-new-mechanism-to-fake-vendor-props-on-a-per-proc.patch
### FAILED APPLYING: /crDroid/patches/trebledroid/platform_bionic/03-Rework-property-overriding.patch
### FAILED APPLYING: /crDroid/patches/trebledroid/platform_external_selinux/04-Allow-devices-virtual-block-genfscon-conflict-seen-o.patch
### FAILED APPLYING: /crDroid/patches/trebledroid/platform_frameworks_av/04-APM-Optionally-force-load-audio-policy-for-system-si.patch
### FAILED APPLYING: /crDroid/patches/trebledroid/platform_frameworks_av/06-Try-again-with-trimmed-audio-port-name-i.patch
### FAILED APPLYING: /crDroid/patches/trebledroid/platform_frameworks_av/09-Add-persist.sys.phh.samsung.camera_ids-property-to-a.patch
### FAILED APPLYING: /crDroid/patches/trebledroid/platform_frameworks_av/12-FIH-devices-Fix-Earpiece-audio-output.patch
### FAILED APPLYING: /crDroid/patches/trebledroid/platform_frameworks_av/15-Support-Samsung-R-multi-cams.patch
### FAILED APPLYING: /crDroid/patches/trebledroid/platform_frameworks_av/17-Not-all-sources-in-a-route-are-valid.-Dont-ignore-th.patch
### FAILED APPLYING: /crDroid/patches/trebledroid/platform_frameworks_av/20-Restore-support-for-audio-HAL-V2-from-the-fram.patch
### FAILED APPLYING: /crDroid/patches/trebledroid/platform_frameworks_av/23-Add-a-prop-to-change-Samsung-flash-strength.patch
### FAILED APPLYING: /crDroid/patches/trebledroid/platform_frameworks_base/10-Support-samsung-Pie-and-Q-light-hal.patch
### FAILED APPLYING: /crDroid/patches/trebledroid/platform_frameworks_base/32-Set-old-fingerprint-sensors-to-security-strong.patch
### FAILED APPLYING: /crDroid/patches/trebledroid/platform_frameworks_base/33-Call-Samsungs-ISehSysInputDev-to-report-screen-state-to-touchscreen-driver.patch
### FAILED APPLYING: /crDroid/patches/trebledroid/platform_packages_modules_Bluetooth/07-Add-properties-to-disable-some-features-commands-sta.patch
### FAILED APPLYING: /crDroid/patches/trebledroid/platform_system_core/01-Let-system-override-ro.apex.updatableand-adb-secure.patch
without 07-Add-properties-to-disable-some-features-commands-sta.patch don't build:
packages/modules/Bluetooth/system/gd/hci/controller.cc:456:41: error: use of undeclared identifier 'GetSystemProperty'; did you mean 'os::GetSystemProperty'?
Hello,
I've tried a lot of GSI ROMs, but the crDroid-9.2-arm64_bgN-Unofficial.img.xz image worked without issue on the first attempt.
Everything works fine except for the screen rotation.
Whatever the physical screen orientation is, you got a -90 degree.
I've partially solved the issue by installing Orientation Control on Google Play and enabling the "lie left" option.
At boot (before the app starts) and when system dialog windows are shown on the screen, the orientation is -90.
The same issue happens with other GSI ROMs, too.
I'm available for tests or to provide the information requested.
As opposed to 9.7, the 9.8 "slim" build does no longer include the Google Setup Wizard and as such restoring Drive backups is no longer possible. Was that a conscious decision? The 9.8 change log refers to a fix for Google Restore (maybe the fix for #30), so it seems unlikely that it was removed from the base ROM.
crDroid 9.12 gsi
December security
thank you
Hello, I tried the latest a64 bgN build were the changelog showed fixed webview crashes as of writing but webview is not responsive and all apps dependent on it are broken so please help fix it in the next version probably android 14 i guess
What ever GSI ROM i try i have both of the internal phone mic and bluetooth headset mic ups!!!
This result an horrible echo of my voice when i speak with someone!
This looks like to be a common issue but i can't find a clear explaination of what is happening AND HOW TO FIX THIS!
Please help me! MTK6761 device.
I tried dozen of GSI ROM from A9 to A12= same !!!!
In crDroid v9.5 when dialing any number there is no any sound come from it .
When dialing a person i can't hear the person and he can't hear me .
Same problem in New Android 13 & 14 GSI's .
But it Works In crDroid v9.4 .
So , could you determine the problem ?
Pls fix screenshot utillity on Plus and Telegram: when i try to get screenshot in chat or group its willl cancelled MatLogs.txt ScreenRecord
Doesn´t work with the latest build(crDroid-9.9 v2023.09.22
Latest).
App crashes when pushing the finger on the sensor when setting up the fingerprints.
In this project,it works well.
Can you help fix it?
Thanks a lot!
Hello, is it possible to add two system files that need to be in /system/framework and /system/etc/permissions of the final image, before or during the build process?
Thanks so much!
Fingerprint sensor on Galaxy A50 doesn´t work in 9.1 and 9.2. It only works in 8.13
Everything works
Great job Thanks
Cannot install 9.2.
Can't find google server.
No problem with other Gsi
When I try to add an account through settings it tries to add a google account straight away. There are no options to add an exchange (microsoft) account or any other type of account like I can in most other ROMs. Is this normal? Is there another way to add corporate email accounts to work in google apps like I normally do?
I was messing with my poco m5 and in the 9.5 update it was working 100% in the last update the doze feature and bl hal It wasn't working and yes I also installed it on another device and it got the same error ps: please change the oasp keyboard to Gboard as it was before it's much better
I don't know why, my devices can still connect to the network but they can't access websites or even google accounts, they keep saying "no network connection".
it doesn't work on 9.7 either
please update the ancient os I really like the rom but it has a bug that makes my screen a little bigger than usual and my icons on the left right like the time and etc in the status bar do not appear and also the gsi has not been updated for a long time I really like gsi a lot pls update
Hi, my device have flash this rom. but it keep stuck on the crdroid logo and keep restarting. can you help me? thanks
also my device is a Samsung Galaxy J7 Prime
When going through the Setup Wizard I ran into a problem. It asked me for facial unlocking. The issue which I'm talking about is that it fails. It just asks you for showing your face to the front facing camera, the system scans, it eventually stops at 3/4 of the progress and it fails by returning the error message. And that goes on, and on, and on, and on... that I would even do that for eternity. I couldn't find the skip option, and it made the system being rendered useless, as I couldn't pass any further in the system setup wizard. I don't know if it is my stupidity or just the system's will.
Phone where I was experiencing this issue: Redmi 9A (MT6765)
My phone doesn't triggered to AFC fast charge protocol but PD works, I would like you to add fast charge protocol support QC3.0 and Samsung AFC
Device: Samsung Note 20 Ultra
ROM GSI: CRDROID 9.5
I experience these problems when flashing the "slim" image to a Fairphone 3.
During the setup phase, the included Google Setup Wizard can't connect to WiFi. After entering the password, usually some small status text should appear beneath the SSID, like "Connecting", "Connected" or "Saved". But when I try it, nothing happens, and when I click the Network again, the password prompt appears again.
This can be bypassed by accessing the Settings app via ADB and connecting there. However, mobile data can't be activated until the completion of the setup, and both ADB commands and the toggle don't have any effect (the latter reverting to "Off" after a few seconds). This is why trying to proceed the setup without ADB by clicking "Use mobile data instead" will result in an error message about connection issues.
After I connect to WiFi and return to the Setup Wizard, I can proceed as usual. Close to the end, after having already started the restoration of an online backup, the message "Couldn't Finish Restoring the Backup" appears. After the completion of the setup, it becomes apparent that the only thing that has been restored were the installed apps. Neither app data nor settings like saved networks were restored properly.
I will attempt attaching log files as soon as possible.
Additionally, I have tried to find a way around that by flashing GApps packages that include their own Setup Wizard, but to no avail: Somehow, both the "slim" as well as the "vanilla" image didn't leave enough space on the system partition to allow me to flash more apps. Curiously, I was unable to find the files of the original Setup Wizard in order to delete them to free up space.
After using magisk patched boot image, an error during boot is displayed in android recovery(cannot load android system). Any solution?
The update to version 9.7 (specifically: "crDroid 9.7 (A53-boot) v2023.07.22") has broken the fingerprint reader on my Samsung S22. It was working fine on v9.6 and I think it also had issues on 9.5 but I only flashed that to test the recently fixed bt-audio problem so I didn't pay much attention. Fingerprint also worked fine on the td AOSP GSI that I flashed a few days ago.
All settings relating to the fingerprint sensor have disappeared from the settings-app.
I tried enabling or disabling [Phh Treble settings -> Samsung -> "workaround for broken fingerprint"]. That didn't help.
it would be superior if you can set the time to "unlimited" when showing new notifications on always on display. Until now you can only show this up to 10 seconds in crdroid notifications settings.
Hello, i am using currently the 9.8 a64 bgn update but some apps are refusing to be downloaded or updated in the playstore due to some compatibility issues yet 9.7 version had no such issues
impossible to install
google account entry screen not displayed.
runs in a loop
I had the 9.3 version installed but when installed this one, it remain on boot loop and nothing come up in the phone
For me it is not possible to switch to bluetooth audio source (headset, car) when calling somebody. Bluetooth audio used by apps like Spotify is working fine.
I have installed on OnePlus N100, usually after a period of 24 hour without rebooting the device, it comes lagged, irresponsible and I have to do a hard restart.
First of all, my prayers🤲, love ❤and respect 🦾for those who are working behind this project 🤗And F stock ROM🤮. can't use mid range low or cheap budget phones without ads, sponsors, promotion and bunch of bloatwares F-ing Up phone performance and battery, notification after notification, not optimised at all.
Major Issue on low Cheap Budget phone
Not So Big Deal/Small/Minor Issues
One Request
My Cheap Phone Model:
INFINIX HOT 11 PLAY X688B
4/64
HELIO G35
HERE IS A LINK FOR STOCK ROM: www.firmwarefile.com/infinix-hot-play-x688b
Google setup wizard was misbehaving a bit
Also, when trying to login after screen goes of screen becomes unresponsive
yes I tested 9.7 and yes they fixed my Bluetooth and they put Gboard back on which I liked the most doze feature It's still giving an error and it's not working and I don't know since 9.6 this bug continues
I tried the slim variant but I experienced these bugs; Bluetooth is not working in medietake even when I turn on from phh settings, another thing is debug mode is also not working coz the phone is not detected by a PC. Lastly the crdroid settings show system UI error when I tried to customizable features. Anyway I love 💕 ur work and I request u to fix those few bug's for me and this gsi could be my daily driver.
I've been trying out the vanilla version of crDroid 10 and been loving the features this rom provides.
However, without signature spoofing enabled, microG won't work on it.
Could you please add this feature so I can continue using this gsi?
Hello! I tried Srdroid from 9.8 to 9.10 on Samsung A30s
Constantly on the load logo. How to fix tell me?
I swiped a GSI, and I can make a phone call, but there is no caller ID. The mobile phone is vivo S10.
Using A64 Binder32 GSI
• Google Apps keeps crashing - can't sign in
• No keyboard so I literally cannot type
• No File Manager app so I can't sideload apk
When trying to install a system image, no matter what I do I don't have enough memory for the System partition. I have exactly 3gb and your firmware with ggaps requires more than 3gb. Device: Mi A2 4/64
fastboot delete-logical-partition product ✓
fastboot delete-logical-partition product_a ✓
fastboot delete-logical-partition product_b ✓
fastboot erase system ✓
a64 failed resize partition after:
fastboot flash system system.img (crdroid)
Resizing 'system' FAILED (remote: 'Not enough space to resize partition')
fastboot: error: Command failed
does the next update support lower than 2gb?
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.