This application provides display and control of Android devices connected on USB (or over TCP/IP). It does not require any root access. It works on GNU/Linux, Windows and macOS.
It focuses on:
- lightness (native, displays only the device screen)
- performance (30~60fps)
- quality (1920×1080 or above)
- low latency (35~70ms)
- low startup time (~1 second to display the first image)
- non-intrusiveness (nothing is left installed on the device)
The Android device requires at least API 21 (Android 5.0).
Make sure you enabled adb debugging on your device(s).
On some devices, you also need to enable an additional option to control it using keyboard and mouse.
- Linux:
apt install scrcpy
- Windows: download
- macOS:
brew install scrcpy
Build from sources: BUILD (simplified process)
On Debian (testing and sid for now) and Ubuntu (20.04):
apt install scrcpy
A Snap package is available: scrcpy
.
For Fedora, a COPR package is available: scrcpy
.
For Arch Linux, an AUR package is available: scrcpy
.
For Gentoo, an Ebuild is available: scrcpy/
.
You could also build the app manually (simplified process).
For Windows, for simplicity, a prebuilt archive with all the dependencies
(including adb
) is available:
scrcpy-win64-v1.19.zip
(SHA-256: 383d6483f25ac0092d4bb9fef6c967351ecd50fc248e0c82932db97d6d32f11b)
It is also available in Chocolatey:
choco install scrcpy
choco install adb # if you don't have it yet
And in Scoop:
scoop install scrcpy
scoop install adb # if you don't have it yet
You can also build the app manually.
The application is available in Homebrew. Just install it:
brew install scrcpy
You need adb
, accessible from your PATH
. If you don't have it yet:
brew install android-platform-tools
It's also available in MacPorts, which sets up adb for you:
sudo port install scrcpy
You can also build the app manually.
Plug an Android device, and execute:
scrcpy
It accepts command-line arguments, listed by:
scrcpy --help
Sometimes, it is useful to mirror an Android device at a lower definition to increase performance.
To limit both the width and height to some value (e.g. 1024):
scrcpy --max-size 1024
scrcpy -m 1024 # short version
The other dimension is computed to that the device aspect ratio is preserved. That way, a device in 1920×1080 will be mirrored at 1024×576.
The default bit-rate is 8 Mbps. To change the video bitrate (e.g. to 2 Mbps):
scrcpy --bit-rate 2M
scrcpy -b 2M # short version
The capture frame rate can be limited:
scrcpy --max-fps 15
This is officially supported since Android 10, but may work on earlier versions.
The device screen may be cropped to mirror only part of the screen.
This is useful for example to mirror only one eye of the Oculus Go:
scrcpy --crop 1224:1440:0:0 # 1224x1440 at offset (0,0)
If --max-size
is also specified, resizing is applied after cropping.
To lock the orientation of the mirroring:
scrcpy --lock-video-orientation # initial (current) orientation
scrcpy --lock-video-orientation=0 # natural orientation
scrcpy --lock-video-orientation=1 # 90° counterclockwise
scrcpy --lock-video-orientation=2 # 180°
scrcpy --lock-video-orientation=3 # 90° clockwise
This affects recording orientation.
The window may also be rotated independently.
Some devices have more than one encoder, and some of them may cause issues or crash. It is possible to select a different encoder:
scrcpy --encoder OMX.qcom.video.encoder.avc
To list the available encoders, you could pass an invalid encoder name, the error will give the available encoders:
scrcpy --encoder _
It is possible to record the screen while mirroring:
scrcpy --record file.mp4
scrcpy -r file.mkv
To disable mirroring while recording:
scrcpy --no-display --record file.mp4
scrcpy -Nr file.mkv
# interrupt recording with Ctrl+C
"Skipped frames" are recorded, even if they are not displayed in real time (for performance reasons). Frames are timestamped on the device, so packet delay variation does not impact the recorded file.
On Linux, it is possible to send the video stream to a v4l2 loopback device, so that the Android device can be opened like a webcam by any v4l2-capable tool.
The module v4l2loopback
must be installed:
sudo apt install v4l2loopback-dkms
To create a v4l2 device:
sudo modprobe v4l2loopback
This will create a new video device in /dev/videoN
, where N
is an integer
(more options are available
to create several devices or devices with specific IDs).
To list the enabled devices:
# requires v4l-utils package
v4l2-ctl --list-devices
# simple but might be sufficient
ls /dev/video*
To start scrcpy using a v4l2 sink:
scrcpy --v4l2-sink=/dev/videoN
scrcpy --v4l2-sink=/dev/videoN --no-display # disable mirroring window
scrcpy --v4l2-sink=/dev/videoN -N # short version
(replace N
by the device ID, check with ls /dev/video*
)
Once enabled, you can open your video stream with a v4l2-capable tool:
ffplay -i /dev/videoN
vlc v4l2:///dev/videoN # VLC might add some buffering delay
For example, you could capture the video within OBS.
It is possible to add buffering. This increases latency but reduces jitter (see #2464).
The option is available for display buffering:
scrcpy --display-buffer=50 # add 50 ms buffering for display
and V4L2 sink:
scrcpy --v4l2-buffer=500 # add 500 ms buffering for v4l2 sink
Scrcpy uses adb
to communicate with the device, and adb
can connect to a
device over TCP/IP:
-
Connect the device to the same Wi-Fi as your computer.
-
Get your device IP address, in Settings → About phone → Status, or by executing this command:
adb shell ip route | awk '{print $9}'
-
Enable adb over TCP/IP on your device:
adb tcpip 5555
. -
Unplug your device.
-
Connect to your device:
adb connect DEVICE_IP:5555
(replaceDEVICE_IP
). -
Run
scrcpy
as usual.
It may be useful to decrease the bit-rate and the definition:
scrcpy --bit-rate 2M --max-size 800
scrcpy -b2M -m800 # short version
If several devices are listed in adb devices
, you must specify the serial:
scrcpy --serial 0123456789abcdef
scrcpy -s 0123456789abcdef # short version
If the device is connected over TCP/IP:
scrcpy --serial 192.168.0.1:5555
scrcpy -s 192.168.0.1:5555 # short version
You can start several instances of scrcpy for several devices.
You could use AutoAdb:
autoadb scrcpy -s '{}'
To connect to a remote device, it is possible to connect a local adb
client to
a remote adb
server (provided they use the same version of the adb
protocol):
adb kill-server # kill the local adb server on 5037
ssh -CN -L5037:localhost:5037 -R27183:localhost:27183 your_remote_computer
# keep this open
From another terminal:
scrcpy
To avoid enabling remote port forwarding, you could force a forward connection
instead (notice the -L
instead of -R
):
adb kill-server # kill the local adb server on 5037
ssh -CN -L5037:localhost:5037 -L27183:localhost:27183 your_remote_computer
# keep this open
From another terminal:
scrcpy --force-adb-forward
Like for wireless connections, it may be useful to reduce quality:
scrcpy -b2M -m800 --max-fps 15
By default, the window title is the device model. It can be changed:
scrcpy --window-title 'My device'
The initial window position and size may be specified:
scrcpy --window-x 100 --window-y 100 --window-width 800 --window-height 600
To disable window decorations:
scrcpy --window-borderless
To keep the scrcpy window always on top:
scrcpy --always-on-top
The app may be started directly in fullscreen:
scrcpy --fullscreen
scrcpy -f # short version
Fullscreen can then be toggled dynamically with MOD+f.
The window may be rotated:
scrcpy --rotation 1
Possibles values are:
0
: no rotation1
: 90 degrees counterclockwise2
: 180 degrees3
: 90 degrees clockwise
The rotation can also be changed dynamically with MOD+← (left) and MOD+→ (right).
Note that scrcpy manages 3 different rotations:
- MOD+r requests the device to switch between portrait and landscape (the current running app may refuse, if it does not support the requested orientation).
--lock-video-orientation
changes the mirroring orientation (the orientation of the video sent from the device to the computer). This affects the recording.--rotation
(or MOD+←/MOD+→) rotates only the window content. This affects only the display, not the recording.
To disable controls (everything which can interact with the device: input keys, mouse events, drag&drop files):
scrcpy --no-control
scrcpy -n
If several displays are available, it is possible to select the display to mirror:
scrcpy --display 1
The list of display ids can be retrieved by:
adb shell dumpsys display # search "mDisplayId=" in the output
The secondary display may only be controlled if the device runs at least Android 10 (otherwise it is mirrored in read-only).
To prevent the device to sleep after some delay when the device is plugged in:
scrcpy --stay-awake
scrcpy -w
The initial state is restored when scrcpy is closed.
It is possible to turn the device screen off while mirroring on start with a command-line option:
scrcpy --turn-screen-off
scrcpy -S
Or by pressing MOD+o at any time.
To turn it back on, press MOD+Shift+o.
On Android, the POWER
button always turns the screen on. For convenience, if
POWER
is sent via scrcpy (via right-click or MOD+p), it
will force to turn the screen off after a small delay (on a best effort basis).
The physical POWER
button will still cause the screen to be turned on.
It can also be useful to prevent the device from sleeping:
scrcpy --turn-screen-off --stay-awake
scrcpy -Sw
For presentations, it may be useful to show physical touches (on the physical device).
Android provides this feature in Developers options.
Scrcpy provides an option to enable this feature on start and restore the initial value on exit:
scrcpy --show-touches
scrcpy -t
Note that it only shows physical touches (with the finger on the device).
By default, scrcpy does not prevent the screensaver to run on the computer.
To disable it:
scrcpy --disable-screensaver
Press MOD+r to switch between portrait and landscape modes.
Note that it rotates only if the application in foreground supports the requested orientation.
Any time the Android clipboard changes, it is automatically synchronized to the computer clipboard.
Any Ctrl shortcut is forwarded to the device. In particular:
- Ctrl+c typically copies
- Ctrl+x typically cuts
- Ctrl+v typically pastes (after computer-to-device clipboard synchronization)
This typically works as you expect.
The actual behavior depends on the active application though. For example, Termux sends SIGINT on Ctrl+c instead, and K-9 Mail composes a new message.
To copy, cut and paste in such cases (but only supported on Android >= 7):
- MOD+c injects
COPY
- MOD+x injects
CUT
- MOD+v injects
PASTE
(after computer-to-device clipboard synchronization)
In addition, MOD+Shift+v allows to inject the computer clipboard text as a sequence of key events. This is useful when the component does not accept text pasting (for example in Termux), but it can break non-ASCII content.
WARNING: Pasting the computer clipboard to the device (either via Ctrl+v or MOD+v) copies the content into the device clipboard. As a consequence, any Android application could read its content. You should avoid to paste sensitive content (like passwords) that way.
Some devices do not behave as expected when setting the device clipboard
programmatically. An option --legacy-paste
is provided to change the behavior
of Ctrl+v and MOD+v so that they
also inject the computer clipboard text as a sequence of key events (the same
way as MOD+Shift+v).
To simulate "pinch-to-zoom": Ctrl+click-and-move.
More precisely, hold Ctrl while pressing the left-click button. Until the left-click button is released, all mouse movements scale and rotate the content (if supported by the app) relative to the center of the screen.
Concretely, scrcpy generates additional touch events from a "virtual finger" at a location inverted through the center of the screen.
There are two kinds of events generated when typing text:
- key events, signaling that a key is pressed or released;
- text events, signaling that a text has been entered.
By default, letters are injected using key events, so that the keyboard behaves as expected in games (typically for WASD keys).
But this may cause issues. If you encounter such a problem, you can avoid it by:
scrcpy --prefer-text
(but this will break keyboard behavior in games)
By default, holding a key down generates repeated key events. This can cause performance problems in some games, where these events are useless anyway.
To avoid forwarding repeated key events:
scrcpy --no-key-repeat
By default, right-click triggers BACK (or POWER on) and middle-click triggers HOME. To disable these shortcuts and forward the clicks to the device instead:
scrcpy --forward-all-clicks
To install an APK, drag & drop an APK file (ending with .apk
) to the scrcpy
window.
There is no visual feedback, a log is printed to the console.
To push a file to /sdcard/Download/
on the device, drag & drop a (non-APK)
file to the scrcpy window.
There is no visual feedback, a log is printed to the console.
The target directory can be changed on start:
scrcpy --push-target=/sdcard/Movies/
Audio is not forwarded by scrcpy. Use sndcpy.
Also see issue #14.
In the following list, MOD is the shortcut modifier. By default, it's (left) Alt or (left) Super.
It can be changed using --shortcut-mod
. Possible keys are lctrl
, rctrl
,
lalt
, ralt
, lsuper
and rsuper
. For example:
# use RCtrl for shortcuts
scrcpy --shortcut-mod=rctrl
# use either LCtrl+LAlt or LSuper for shortcuts
scrcpy --shortcut-mod=lctrl+lalt,lsuper
Super is typically the Windows or Cmd key.
Action | Shortcut |
---|---|
Switch fullscreen mode | MOD+f |
Rotate display left | MOD+← (left) |
Rotate display right | MOD+→ (right) |
Resize window to 1:1 (pixel-perfect) | MOD+g |
Resize window to remove black borders | MOD+w | Double-left-click¹ |
Click on HOME |
MOD+h | Middle-click |
Click on BACK |
MOD+b | Right-click² |
Click on APP_SWITCH |
MOD+s | 4th-click³ |
Click on MENU (unlock screen) |
MOD+m |
Click on VOLUME_UP |
MOD+↑ (up) |
Click on VOLUME_DOWN |
MOD+↓ (down) |
Click on POWER |
MOD+p |
Power on | Right-click² |
Turn device screen off (keep mirroring) | MOD+o |
Turn device screen on | MOD+Shift+o |
Rotate device screen | MOD+r |
Expand notification panel | MOD+n | 5th-click³ |
Expand settings panel | MOD+n+n | Double-5th-click³ |
Collapse panels | MOD+Shift+n |
Copy to clipboard⁴ | MOD+c |
Cut to clipboard⁴ | MOD+x |
Synchronize clipboards and paste⁴ | MOD+v |
Inject computer clipboard text | MOD+Shift+v |
Enable/disable FPS counter (on stdout) | MOD+i |
Pinch-to-zoom | Ctrl+click-and-move |
¹Double-click on black borders to remove them.
²Right-click turns the screen on if it was off, presses BACK otherwise.
³4th and 5th mouse buttons, if your mouse has them.
⁴Only on Android >= 7.
Shortcuts with repeated keys are executted by releasing and pressing the key a second time. For example, to execute "Expand settings panel":
- Press and keep pressing MOD.
- Then double-press n.
- Finally, release MOD.
All Ctrl+key shortcuts are forwarded to the device, so they are handled by the active application.
To use a specific adb binary, configure its path in the environment variable
ADB
:
ADB=/path/to/adb scrcpy
To override the path of the scrcpy-server
file, configure its path in
SCRCPY_SERVER_PATH
.
A colleague challenged me to find a name as unpronounceable as gnirehtet.
strcpy
copies a string; scrcpy
copies a screen.
See BUILD.
See the FAQ.
Read the developers page.
Copyright (C) 2018 Genymobile
Copyright (C) 2018-2021 Romain Vimont
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
This README is available in other languages:
- Indonesian (Indonesia,
id
) - v1.16 - Italiano (Italiano,
it
) - v1.19 - 日本語 (Japanese,
jp
) - v1.17 - 한국어 (Korean,
ko
) - v1.11 - português brasileiro (Brazilian Portuguese,
pt-BR
) - v1.17 - Español (Spanish,
sp
) - v1.17 - 简体中文 (Simplified Chinese,
zh-Hans
) - v1.17 - 繁體中文 (Traditional Chinese,
zh-Hant
) - v1.15 - Turkish (Turkish,
tr
) - v1.18
Only this README file is guaranteed to be up-to-date.