1. I found only pre-built droplets on DigitalOcean and a lot of instructions about setting up Pi-hole and WireGuard, but I do not want to configure everything each time with so many settings. Ansible is an easy method to write some "setup notes" one time, and DigitalOcean has traffic limits on droplets.
2. When I use ad-blocker DNS, my phone stays cool and works for a full day (now it works 24 hours without charging) It is truly the best method to increase battery lifetime. But, if all p2p connections disabled, battery lifetime increased to 47 hours with my using cases, it is fantastic.
3. I dislike spyware.

Look at screenshot. 80% requests it is spyware!

Prerequirements:

1. Remote host with ssh access (tested DigitalOcean and Amazon VPS) It is enough to have 512MB of RAM, 1 CPU core, and 5GB of disk space.
2. Ubintu 22.04 on remote host (tested only with Ubuntu 22.04)

Install steps:

0. Get EC2 instance on aws.amazon.com or Droplet on digitalocean.com or other VPS on any hoster
1. On LOCAL computer Install latest version of ansible

sudo apt-add-repository ppa:ansible/ansible
sudo apt-get update
sudo apt-get install ansible

2. Edit group_vars/vpn.example. It is file with main settings. And rename it to vpn If you do not have ssh keys, you must set group_vars/vpn->autogenerate_ssh_key: true
3. Edit inventory.example file to add IP of your remote hosts to install VPN+Pihole, in this file possible to set ssh access params. And rename it to inventory
4. If need edit data.yml to set whitelists, blocklists and autoresolve urls. Autoresolve urls enable p2p traffic for resolved IPs. By default added Google services and Telegram.
5. Execute command on LOCAL computer (in dir with deploy.yml file)

ansible-playbook --ask-become-pass ./deploy.yml

If you do not need some actions just use tags. Available tags: [user_creation,vpn_installation,docker_installation,pi_hole_installation,adblock_add,adblock_remove,disable_ubuntu_user]. But it not tested. example command:

ansible-playbook --ask-become-pass ./deploy.yml --tags adblock_add 

7. insert REMOTE sudo password to prompt. At first run it is default for Ubuntu empty sudo password, next runs it is password from group_vars/vpn->user_password
8. After installation will be created dir clients in playbook dir. It is configuration files for clients and QR codes to scan from phone for connectiong to VPN.
9. At the end of instalation adblock lists from data.yml will be loaded or removed. It is possible to run adblock_add adblock_remove tags separately if need at any time.

ansible-playbook ./deploy.yml --tags adblock_add,adblock_remove

10. At last step will be disabled login with ubuntu default user for Ubuntu. Next logins possible only with group_vars/vpn->user_to_add user name. So at first run inventory host description was

....3.eu-north-1.compute.amazonaws.com:22 ansible_ssh_user=ubuntu ansible_ssh_private_key_file=../../ubuntu.pem

at next runs after first success run it will be

....3.eu-north-1.compute.amazonaws.com:22 ansible_ssh_user={{ from  common_vars.yml->user_to_add }} ansible_ssh_private_key_file=../../key.pem

11. You do not need to doing something on remote host at all ;)
12. Playbook is not fully idempotent, but you can run it multiple times, but every time you will get new clients configs for connection to VPN. If you got any errors, just run it again. It is playbook for personal use, so we can just generate X configs for all our devices one time.

0. If group_vars/vpn->autogenerate_ssh_key: true on localhost will be generated ssh keypair to path group_vars/vpn->path_and_filename_of_private_ssh_key_on_localhost. Existing keys never be replaced.
1. Default ubuntu user with name ubuntu on remote host will be disabled and registered user with name group_vars/vpn->user_to_add. For the user on remote host will be registered new generated public key or existing public key from path group_vars/vpn->path_and_filename_of_private_ssh_key_on_localhost+.pub
2. Docker is installed on the remote host.
3. Pi-hole DNS is installed on the remote host. Added whitelists.
4. All requests to port 53 inside the VPN will be redirected to the Pi-hole DNS, even if some spyware attempts to make a direct request to 8.8.8.8 or other.
5. Zram is installed if install_zram: true. It is a good method to expand VPS RAM on the remote host. But you must have linux kernel with zram module. As example https://liquorix.net/#install
6. WireGuard is installed on the remote host.
7. Client configuration files are generated on the localhost. Will be generate two type of files:

• (not tested) Only DNS requests VPN. So, only DNS requests from client will be send to VPN, other traffic will be direct. This configs will be placed to ./clients/111-42.eu-north-1.compute.amazonaws.com/etc/wireguard/clients/wg0/dns
• All traffic over VPN. This in ./clients/111-42.eu-north-1.compute.amazonaws.com/etc/wireguard/clients/wg0/full

9. (not tested) If default group_vars/vpn->wireguard_listen_port port is blocked all traffic from ports group_vars/vpn->fallback_wireguard_listen_ports will be redirected to group_vars/vpn->wireguard_listen_port
10. All unknown p2p TCP traffic not recognized by Pi-Hole (and autoresolve from data.yml) to all p2p tcp and udp ports will be disabled (by settings below) and totaly all logged. Some spyware apps use direct requests. After I found this hidden traffic, battery lifetime significantly increased. Use group_vars/vpn->(allow_only_p2p_tcp_ports||allow_only_p2p_udp_ports) to set only allowed ports or group_vars/vpn->(restricted_p2p_tcp_ports||restricted_p2p_udp_ports) to restrict only ports from lists and allow other.

1. Install wireguard client to phone
2. Scan QR code of any client from client dir (config_*.qr.txt files it is QR codes) and connect to VPN
3. Open http://pi.hole/admin in browser (access only from VPN, password from group_vars/vpn->pi_hole_admin_password)

Command to install wireguard

sudo apt-get install wireguard

Command for import client configuration from file to NetworkManager:

nmcli connection import type wireguard file ./client_4.conf

Command to connect:

nmcli connection up client_4

Command to disconnect:

nmcli connection down client_4

Command to delete connection:

nmcli connection delete client_4

1. If you have problems with freezes tasks try to comment inventory->ssh_connection options. It is slower but may resolve some problems.
2. Do not forget to open ports 22 (SSH), 51820 (default VPNs) on providers firewall
3. Sometimes the playbook can end up in an inconsistent state. For example, when systemd-resolved is stopped but the new DNS is not properly set, it might be necessary to recreate the VPS.
4. If you still have freezes it may be trait of low memory on remote VPS host, try to restart VPS or add memory :)
5. For iptables debuging use on client and server sides:

• iptables -t raw -A OUTPUT -p udp -j TRACE
• iptables -t raw -A PREROUTING -p udp -j TRACE
• xtables-monitor --trace

6. If some apps do not work: remove all blocked p2p ports group_vars/vpn->allow all p2p traffic example and replay playbook. It is just for test. You can find some blocked applications and investigate better solution.

If you want to, you can identify additional ports used by spyware on your phone:

1. Connect to VPS by SSH
2. sudo su
3. cat /var/log/syslog |grep p2p|grep -o "PROTO.*DPT=[0-9]*"|sort|uniq

The above command will help you identify and list the unique ports and protocols that might be associated with spyware activity.