The "batch"-button will run the segmentation on all images in the folder of the currently opened image. Use imagej_roi_converter_batch.py to convert the results to ImageJ rois.
A generalist algorithm for cell and nucleus segmentation.
This code was written by Carsen Stringer and Marius Pachitariu. To learn about Cellpose, read the paper or watch the talk. For support, please open an issue.
If you want to improve Cellpose for yourself and for everyone else, please consider contributing manual segmentations for a few of your images via the built-in GUI interface (see instructions below).
Pytorch is now the default deep neural network software for cellpose. Mxnet will still be supported. To install mxnet (CPU), run pip install mxnet-mkl
. To use mxnet in a notebook, declare torch=False
when creating a model, e.g. model = models.Cellpose(torch=False)
. To use mxnet on the command line, add the flag --mxnet
, e.g. python -m cellpose --dir ~/images/ --mxnet
. The pytorch implementation is 20% faster than the mxnet implementation when running on the GPU and 20% slower when running on the CPU.
Dynamics are computed using bilinear interpolation by default instead of nearest neighbor interpolation. Set interp=False
in model.eval
to turn off. The bilinear interpolation will be slightly slower on the CPU, but it is faster than nearest neighbor if using torch and the GPU is enabled.
You can quickly try out Cellpose on the website first (some features disabled).
You can also run Cellpose in google colab with a GPU -> . This is recommended if you have issues with MKL or run speed on your local computer (and are running 3D volumes). Colab does not allow you to run the GUI, but you can save
*_seg.npy
files in colab that you can download and open in the GUI.
Executable file: You can download an executable file for Windows 10 or for Mac OS (High Sierra or greater) that were made using PyInstaller on Intel processors (MKL acceleration works, but no GPU support). Note in both cases it will take a few seconds to open.
- The Mac OS file will download as
cellpose_mac
ORcellpose_mac.dms
. You will need to make it into an executable file and run it through the terminal:
- Open a terminal and run
cd ~/Downloads/
. - Run
chmod 777 cellpose_mac
ORchmod 777 cellpose_mac.dms
to make the file executable. - Run
./cellpose_mac
OR./cellpose_mac.dms
to open the cellpose GUI. Messages from cellpose will be printed in the terminal. - You can also run using the command line interface, e.g. as
./cellpose_mac --dir ~/Pictures/ --chan 2 --save_png
.
- The Windows 10 file is an exe and you can click on it to run the GUI. You can also run using the command line interface, e.g. as
cellpose.exe --dir Pictures/ --chan 2 --save_png
Detailed documentation at www.cellpose.org/docs.
Linux, Windows and Mac OS are supported for running the code. For running the graphical interface you will need a Mac OS later than Yosemite. At least 8GB of RAM is required to run the software. 16GB-32GB may be required for larger images and 3D volumes. The software has been heavily tested on Windows 10 and Ubuntu 18.04 and less well-tested on Mac OS. Please open an issue if you have problems with installation.
This process should take less than 5 minutes.
- Install an Anaconda distribution of Python -- Choose Python 3.7 and your operating system. Note you might need to use an anaconda prompt if you did not add anaconda to the path.
- Download the
environment.yml
file from the repository. You can do this by cloning the repository, or copy-pasting the text from the file into a text document on your local computer. - Open an anaconda prompt / command prompt with
conda
for python 3 in the path - Change directories to where the
environment.yml
is and runconda env create -f environment.yml
- To activate this new environment, run
conda activate cellpose
- You should see
(cellpose)
on the left side of the terminal line. Now runpython -m cellpose
and you're all set.
To upgrade cellpose (package here), run the following in the environment:
pip install cellpose --upgrade
If you have an older cellpose
environment you can remove it with conda env remove -n cellpose
before creating a new one.
Note you will always have to run conda activate cellpose before you run cellpose. If you want to run jupyter notebooks in this environment, then also conda install jupyter
and pip install matplotlib
.
If you're feeling adventurous you can also try to install cellpose from your base environment using the command
pip install cellpose[gui]
If you have issues with installation, see the docs for more details, and then if the suggestions fail, open an issue.
If you plan on running many images, you may want to install a GPU version of torch (if it isn't already installed).
Before installing the GPU version, remove the CPU version:
pip uninstall torch
Follow the instructions here to determine what version to install. The Anaconda install is recommended along with CUDA version 10.2. For instance this command will install the 10.2 version on Linux and Windows (note the torchvision
and torchaudio
commands are removed because cellpose doesn't require them):
conda install pytorch cudatoolkit=10.2 -c pytorch
When upgrading GPU Cellpose in the future, you will want to ignore dependencies (to ensure that the pip version of torch does not install):
pip install --no-deps cellpose --upgrade
Follow steps from above to install the dependencies. In the github repository, run pip install -e .
and the github version will be installed. If you want to go back to the pip version of cellpose, then say pip install cellpose
.
The quickest way to start is to open the GUI from a command line terminal. You might need to open an anaconda prompt if you did not add anaconda to the path:
python -m cellpose
The first time cellpose runs it downloads the latest available trained model weights from the website.
You can now drag and drop any images (*.tif, *.png, *.jpg, *.gif) into the GUI and run Cellpose, and/or manually segment them. When the GUI is processing, you will see the progress bar fill up and during this time you cannot click on anything in the GUI. For more information about what the GUI is doing you can look at the terminal/prompt you opened the GUI with. For example data, see website or this google drive folder. For best accuracy and runtime performance, resize images so cells are less than 100 pixels across.
- Download the google drive folder and unzip it. These are a subset of the test images from the paper.
- Start the GUI with
python -m cellpose
. - Drag an image from the folder into the GUI.
- Set the model (in demo all are
cyto
) and the channel you want to segment (in demo all aregreen
). Optionally set the second channel if you are segmentingcyto
and have an available nucleus channel. - Click the
calibrate
button to estimate the size of the objects in the image. Alternatively you can set thecell diameter
by hand and press ENTER. You will see the size you set as a red disk at the bottom left of the image. - Click the
run segmentation
button. If MASKS ON is checked, you should see masks drawn on the image. - Now you can click the LEFT/RIGHT arrow keys to move through the folder and segment another image.
On the demo images each of these steps should run in less than a few seconds on a standard laptop or desktop (with mkl working).
For multi-channel, multi-Z tiff's, the expected format is Z x channels x Ly x Lx.
We are very excited about receiving community contributions to the training data and re-training the cytoplasm model to make it better. Please follow these guidelines:
- Run cellpose on your data to see how well it does. Try varying the diameter, which can change results a little.
- If there are relatively few mistakes, it won't help much to contribute labelled data.
- If there are consistent mistakes, your data is likely very different from anything in the training set, and you should expect major improvements from contributing even just a few manually segmented images.
- For images that you contribute, the cells should be at least 10 pixels in diameter, and there should be at least several dozens of cells per image, ideally ~100. If your images are too small, consider combining multiple images into a single big one and then manually segmenting that. If they are too big, consider splitting them into smaller crops.
- For the manual segmentation, please try to outline the boundaries of the cell, so that everything (membrane, cytoplasm, nucleus) is inside the boundaries. Do not just outline the cytoplasm and exclude the membrane, because that would be inconsistent with our own labelling and we wouldn't be able to use that.
- Do not use the results of the algorithm in any way to do contributed manual segmentations. This can reinforce a vicious circle of mistakes, and compromise the dataset for further algorithm development.
If you are having problems with the nucleus model, please open an issue before contributing data. Nucleus images are generally much less diverse, and we think the current training dataset already covers a very large set of modalities.
The GUI serves two main functions:
- Running the segmentation algorithm.
- Manually labelling data.
There is a help window in the GUI that provides more instructions and a page in the documentation here. Also, if you hover over certain words in the GUI, their definitions are revealed as tooltips. Here is a summary of their functions:
See run_cellpose.ipynb.
Run python -m cellpose
and specify parameters as below. For instance to run on a folder with images where cytoplasm is green and nucleus is blue and save the output as a png:
python -m cellpose --dir ~/images_cyto/test/ --pretrained_model cyto --chan 2 --chan2 3 --save_png
You can specify the diameter for all the images or set to 0 if you want the algorithm to estimate it on an image by image basis. Here is how to run on nuclear data (grayscale) where the diameter is automatically estimated:
python -m cellpose --dir ~/images_nuclei/test/ --pretrained_model nuclei --diameter 0. --save_png
See the docs for more info.
You can check if cellpose is running the MKL version (if you are using the CPU not the GPU) by adding the flag --check_mkl
. If you are not using MKL cellpose will be much slower. Here are Cellpose run times divided into the time it takes to run the deep neural network (DNN) and the time for postprocessing (gradient tracking, segmentation, quality control etc.). The DNN runtime is shown using either a GPU (Nvidia GTX 1080Ti) or a CPU (Intel 10-core 7900X), with or without network ensembling (4net vs 1net). The postprocessing runtime is similar regardless of ensembling or CPU/GPU version. Runtime is shown for different image sizes, all with a cell diameter of 30 pixels (the average from our training set).
256 pix | 512 pix | 1024 pix | |
---|---|---|---|
DNN (1net, GPU) | 0.054 s | 0.12 s | 0.31 s |
DNN (1net, CPU) | 0.30 s | 0.65 s | 2.4 s |
DNN (4net, GPU) | 0.23 s | 0.41 s | 1.3 s |
DNN (4net, CPU) | 1.3 s | 2.5 s | 9.1 s |
Postprocessing (CPU) | 0.32 s | 1.2 s | 6.1 s |
See the docs for info.
cellpose relies on the following excellent packages (which are automatically installed with conda/pip if missing):