• CIC Prefix : BUZZ
• Author : Nenad Filipovic
• Verison : 1.0.0
• Date : Feb 2019.

We provide a library for the BUZZ Click on our LibStock page, as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Library Description

The library covers all the necessary functions to control BUZZ Click board. Library performs the communication with the device via PWM module and using Sound library.

Key functions :

• buzz_gpioDriverInit( (T_BUZZ_P)&_MIKROBUS1_GPIO ) - Function initializes GPIO driver for the desired MIKROBUS1.

Examples Description

The application is composed of three sections :

• System Initialization - Initializes GPIO and LOG structures, set PWM pin as ouput and start write log.
• Application Initialization - Initialization driver enable's - GPIO and configures the appropriate MCU pin for sound generation.
• Application Task - (code snippet) This is an example which demonstrates the use of BUZZ Click board, which plays Imperial March using Sound library.

void applicationTask()
{
    mikrobus_logWrite( " Play the music ", _LOG_LINE );
    buzz_melody();
    Delay_ms( 1000 );
    mikrobus_logWrite( "----------------", _LOG_LINE );
}

Additional Functions :

• buzz_soundInit() - Configures the appropriate MCU pin for sound generation.
• buzz_melody() - Demo melody - plays Imperial March using Sound library.

The full application code, and ready to use projects can be found on our LibStock page.

Other mikroE Libraries used in the example:

• Sound
• UART

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.