microchip-pic-avr-examples / pic24f-hello-world-uart Goto Github PK

This is a simple Hello world application which prints the string "Hello World !!!" continuously on the serial terminal.

• PIC24FJ1024GB610 microcontroller (https://www.microchip.com/PIC24FJ1024GB610)

• MPLAB® X IDE v5.35 or newer (https://www.microchip.com/mplabx)
• MPLAB® XC16 v1.50 or newer (https://www.microchip.com/xc)
• Any of the serial terminal application. Example: Tera Term (https://ttssh2.osdn.jp/index.html.en)

• Explorer 16/32 Development Board (https://www.microchip.com/DM240001-2)
• PIC24FJ1024GB610 PIM (https://www.microchip.com/MA240023)
• Micro USB Cable

• Make sure J37 and J38 jumpers are installed.
• Connect the Micro USB Cable to the serial connector(J40) in the Explorer 16/32 Development Board.

Build the Project and program the device. Once the application code is flashed on to the device, open the serial terminal application and configure the baudrate to 9600 , No parity , 8 Data bits and 1 Stop bit and no flow control. Users will see the string "Hello World !!!" being continuously printed on the serial terminal.