mbtileserver
A simple Go-based server for map tiles stored in mbtiles format.
It currently provides support for png
, jpg
, webp
, and pbf
(vector tile)
tilesets according to version 1.0 of the mbtiles specification. Tiles
are served following the XYZ tile scheme, based on the Web Mercator
coordinate reference system. UTF8 Grids are no longer supported.
In addition to tile-level access, it provides:
- TileJSON 2.1.0 endpoint for each tileset, with full metadata from the mbtiles file.
- a preview map for exploring each tileset.
- a minimal ArcGIS tile map service API
We have been able to host a bunch of tilesets on an AWS t2.nano virtual machine without any issues.
Goals
- Provide a web tile API for map tiles stored in mbtiles format
- Be fast
- Run on small resource cloud hosted machines (limited memory & CPU)
- Be easy to install and operate
Supported Go versions
Requires Go 1.16+.
mbtileserver
uses go modules and follows standard practices as of Go 1.16.
Installation
You can install this project with
$ go install github.com/consbio/mbtileserver@latest
This will create and install an executable called mbtileserver
.
Usage
From within the repository root ($GOPATH/bin needs to be in your $PATH):
$ mbtileserver --help
Serve tiles from mbtiles files.
Usage:
mbtileserver [flags]
Flags:
-c, --cert string X.509 TLS certificate filename. If present, will be used to enable SSL on the server.
-d, --dir string Directory containing mbtiles files. Directory containing mbtiles files. Can be a comma-delimited list of directories. (default "./tilesets")
--disable-preview Disable map preview for each tileset (enabled by default)
--disable-svc-list Disable services list endpoint (enabled by default)
--disable-tilejson Disable TileJSON endpoint for each tileset (enabled by default)
--domain string Domain name of this server. NOTE: only used for AutoTLS.
--dsn string Sentry DSN
--enable-arcgis Enable ArcGIS Mapserver endpoints
--enable-fs-watch Enable reloading of tilesets by watching filesystem
--enable-reload-signal Enable graceful reload using HUP signal to the server process
--generate-ids Automatically generate tileset IDs instead of using relative path
-h, --help help for mbtileserver
-k, --key string TLS private key
-p, --port int Server port. Default is 443 if --cert or --tls options are used, otherwise 8000. (default -1)
-r, --redirect Redirect HTTP to HTTPS
--root-url string Root URL of services endpoint (default "/services")
-s, --secret-key string Shared secret key used for HMAC request authentication
--tiles-only Only enable tile endpoints (shortcut for --disable-svc-list --disable-tilejson --disable-preview)
-t, --tls Auto TLS via Let's Encrypt
-v, --verbose Verbose logging
So hosting tiles is as easy as putting your mbtiles files in the tilesets
directory and starting the server. Woo hoo!
You can have multiple directories in your tilesets
directory; these will be converted into appropriate URLs:
<tile_dir>/foo/bar/baz.mbtiles
will be available at /services/foo/bar/baz
.
If --generate-ids
is provided, tileset IDs are automatically generated using a SHA1 hash of the path to each tileset.
By default, tileset IDs are based on the relative path of each tileset to the base directory provided using --dir
.
When you want to remove, modify, or add new tilesets, simply restart the server process or use one of the reloading processes below.
If a valid Sentry DSN is provided, warnings, errors, fatal errors, and panics will be reported to Sentry.
If redirect
option is provided, the server also listens on port 80 and redirects to port 443.
If the --tls
option is provided, the Let's Encrypt Terms of Service are accepted automatically on your behalf. Please review them here. Certificates are cached in a .certs
folder created where you are executing mbtileserver
. Please make sure this folder can be written by the mbtileserver
process or you will get errors. Certificates are not requested until the first request is made to the server. We recommend that you initialize these after startup by making a request against https://<hostname>/services
and watching the logs from the server to make sure that certificates were processed correctly. Common errors include Let's Encrypt not being able to access your server at the domain you provided. localhost
or internal-only domains will not work.
If either --cert
or --tls
are provided, the default port is 443.
You can also use environment variables instead of flags, which may be more helpful when deploying in a docker image. Use the associated flag to determine usage. The following variables are available:
PORT
(--port
)TILE_DIR
(--dir
)GENERATE_IDS
(--generate-ids
)ROOT_URL
(--root-url
)DOMAIN
(--domain
)TLS_CERT
(--cert
)TLS_PRIVATE_KEY
(--key
)HMAC_SECRET_KEY
(--secret-key
)AUTO_TLS
(--tls
)REDIRECT
(--redirect
)DSN
(--dsn
)VERBOSE
(--verbose
)
Example:
$ PORT=7777 TILE_DIR=./path/to/your/tiles VERBOSE=true mbtileserver
In a docker-compose.yml file it will look like:
mbtileserver:
...
environment:
PORT: 7777
TILE_DIR: "./path/to/your/tiles"
VERBOSE: true
entrypoint: mbtileserver
...
Reloading
Reload using a signal
mbtileserver optionally supports graceful reload (without interrupting any in-progress requests). This functionality
must be enabled with the --enable-reload-signal
flag. When enabled, the server can be reloaded by sending it a HUP
signal:
$ kill -HUP <pid>
Reloading the server will cause it to pick up changes to the tiles directory, adding new tilesets and removing any that are no longer present.
Reload using a filesystem watcher
mbtileserver optionally supports reload of individual tilesets by watching for filesystem changes. This functionality
must be enabled with the --enable-fs-watch
flag.
All directories specified by -d
/ --dir
and any subdirectories that exist at the time the server is started
will be watched for changes to the tilesets.
An existing tileset that is being updated will be locked while the file on disk is being updated. This will cause incoming requests to that tileset to stall for up to 30 seconds and will return as soon as the tileset is completely updated and unlocked. If it takes longer than 30 seconds for the tileset to be updated, HTTP 503 errors will be returned for that tileset until the tileset is completely updated and unlocked.
Under very high request volumes, requests that come in between when the file is first modified and when that modification is first detected (and tileset locked) may encounter errors.
WARNING: Do not remove the top-level watched directories while the server is running.
WARNING: Do not create or delete subdirectories within the watched directories while the server is running.
WARNING: do not generate tiles directly in the watched directories. Instead, create them in separate directories and copy them into the watched directories when complete.
Using with a reverse proxy
You can use a reverse proxy in front of mbtileserver
to intercept incoming requests, provide TLS, etc.
We have used both Caddy
and NGINX
for our production setups in various projects,
usually when we need to proxy to additional backend services.
To make sure that the correct request URL is passed to mbtileserver
so that TileJSON and map preview endpoints work correctly,
make sure to have your reverse proxy send the following headers:
Scheme (HTTP vs HTTPS):
one of X-Forwarded-Proto
, X-Forwarded-Protocol
, X-Url-Scheme
to set the scheme of the request.
OR
X-Forwarded-Ssl
to automatically set the scheme to HTTPS.
Host:
Set X-Forwarded-Host
to the correct host for the request.
Caddy v2 Example:
For mbtileserver
running on port 8000 locally, add the following to the block for your domain name:
<domain_name> {
route /services* {
reverse_proxy localhost:8000
}
}
You may want to consider adding cache control headers within the route
block
depending on how often the contents of your tilesets change. For instance,
to prevent clients from caching tiles longer than 1 hour:
route /services* {
header Cache-Control "public, max-age=3600, must-revalidate"
localhost mbtileserver:8000
}
NGINX Example:
For mbtileserver
running on port 8000 locally, add the following to your server
block:
server {
<other config options>
location /services {
proxy_set_header Host $host;
proxy_set_header X-Forwarded-Host $server_name;
proxy_set_header X-Real-IP $remote_addr;
proxy_pass http://localhost:8000;
}
}
Docker
Pull the latest image from Docker Hub:
$ docker pull consbio/mbtileserver:latest
To build the Docker image locally (named mbtileserver
):
$ docker build -t mbtileserver -f Dockerfile .
To run the Docker container on port 8080 with your tilesets in <host tile dir>
.
Note that by default, mbtileserver
runs on port 8000 in the container.
$ docker run --rm -p 8080:8000 -v <host tile dir>:/tilesets consbio/mbtileserver
You can pass in additional command-line arguments to mbtileserver
, for example, to use
certificates and files in <host cert dir>
so that you can access the server via HTTPS. The example below uses self-signed certificates generated using
mkcert
. This example uses automatic redirects, which causes mbtileserver
to also listen on port 80 and automatically redirect to 443.
$ docker run --rm -p 80:80 443:443 -v <host tile dir>:/tilesets -v <host cert dir>:/certs/ consbio/mbtileserver -c /certs/localhost.pem -k /certs/localhost-key.pem -p 443 --redirect
Alternately, use docker-compose
to run:
$ docker-compose up -d
The default docker-compose.yml
configures mbtileserver
to connect to port 8080 on the host, and uses the ./mbtiles/testdata
folder for tilesets. You can use your own docker-compose.override.yml
or environment specific files to set these how you like.
To reload the server:
$ docker exec -it mbtileserver sh -c "kill -HUP 1"
Specifications
- expects mbtiles files to follow version 1.0 of the mbtiles specification. Version 1.1 is preferred.
- implements TileJSON 2.1.0
Creating Tiles
You can create mbtiles files using a variety of tools. We have created tiles for use with mbtileserver using:
- TileMill (image tiles)
- tippecanoe (vector tiles)
- pymbtiles (tiles created using Python)
- tpkutils (image tiles from ArcGIS tile packages)
The root name of each mbtiles file becomes the "tileset_id" as used below.
XYZ Tile API
The primary use of mbtileserver
is as a host for XYZ tiles.
These are provided at:
/services/<tileset_id>/tiles/{z}/{x}/{y}.<format>
where <format>
is one of png
, jpg
, webp
, pbf
depending on the type of data in the tileset.
TileJSON API
mbtileserver
automatically creates a TileJSON endpoint for each service at /services/<tileset_id>
.
The TileJSON uses the same scheme and domain name as is used for the incoming request; the --domain
setting does not
affect auto-generated URLs.
This API provides most elements of the metadata
table in the mbtiles file as well as others that are
automatically inferred from tile data.
For example,
http://localhost/services/states_outline
returns something like this:
{
"bounds": [
-179.23108,
-14.601813,
179.85968,
71.441055
],
"center": [
0.314297,
28.419622,
1
],
"credits": "US Census Bureau",
"description": "States",
"format": "png",
"id": "states_outline",
"legend": "[{\"elements\": [{\"label\": \"\", \"imageData\": \"data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAABQAAAAUCAYAAACNiR0NAAAAAXNSR0IB2cksfwAAAAlwSFlzAAAOxAAADsQBlSsOGwAAAGFJREFUOI3tlDEOgEAIBClI5kF+w0fxwXvQdjZywcZEtDI31YaQgWrdPsYzAPFGJCmmEAhJGzCash0wSVE/HHnlKcDMfrPXYgmXcAl/JswK6lCrz89BdGVm1+qrH0bbWDgA3WwmgzD8ueEAAAAASUVORK5CYII=\"}], \"name\": \"tl_2015_us_state\"}]",
"map": "http://localhost/services/states_outline/map",
"maxzoom": 4,
"minzoom": 0,
"name": "states_outline",
"scheme": "xyz",
"tags": "states",
"tilejson": "2.1.0",
"tiles": [
"http://localhost/services/states_outline/tiles/{z}/{x}/{y}.png"
],
"type": "overlay",
"version": "1.0.0"
}
Map preview
mbtileserver
automatically creates a map preview page for each tileset at /services/<tileset_id>/map
.
This currently uses Leaflet
for image tiles and Mapbox GL JS
for vector tiles.
ArcGIS API
This project currently provides a minimal ArcGIS tiled map service API for tiles stored in an mbtiles file.
This is enabled with the --enable-arcgis
flag.
This should be sufficient for use with online platforms such as Data Basin. Because the ArcGIS API relies on a number of properties that are not commonly available within an mbtiles file, so certain aspects are stubbed out with minimal information.
This API is not intended for use with more full-featured ArcGIS applications such as ArcGIS Desktop.
Available endpoints:
- Service info:
http://localhost:8000/arcgis/rest/services/<tileset_id>/MapServer
- Layer info:
http://localhost:8000/arcgis/rest/services/<tileset_id>/MapServer/layers
- Tiles:
http://localhost:8000/arcgis/rest/services/<tileset_id>/MapServer/tile/0/0/0
Request authorization
Providing a secret key with -s/--secret-key
or by setting the HMAC_SECRET_KEY
environment variable will
restrict access to all server endpoints and tile requests. Requests will only be served if they provide a cryptographic
signature created using the same secret key. This allows, for example, an application server to provide authorized
clients a short-lived token with which the clients can access tiles for a specific service.
Signatures expire 15 minutes from their creation date to prevent exposed or leaked signatures from being useful past a small time window.
Creating signatures
A signature is a URL-safe, base64 encoded HMAC hash using the SHA1
algorithm. The hash key is an SHA1
key created
from a randomly generated salt, and the secret key string. The hash payload is a combination of the ISO-formatted
date when the hash was created, and the authorized service id.
The following is an example signature, created in Go for the service id test
, the date
2019-03-08T19:31:12.213831+00:00
, the salt 0EvkK316T-sBLA
, and the secret key
YMIVXikJWAiiR3q-JMz1v2Mfmx3gTXJVNqme5kyaqrY
Create the SHA1 key:
serviceId := "test"
date := "2019-03-08T19:31:12.213831+00:00"
salt := "0EvkK316T-sBLA"
secretKey := "YMIVXikJWAiiR3q-JMz1v2Mfmx3gTXJVNqme5kyaqrY"
key := sha1.New()
key.Write([]byte(salt + secretKey))
Create the signature hash:
hash := hmac.New(sha1.New, key.Sum(nil))
message := fmt.Sprintf("%s:%s", date, serviceId)
hash.Write([]byte(message))
Finally, base64-encode the hash:
b64hash := base64.RawURLEncoding.EncodeToString(hash.Sum(nil))
fmt.Println(b64hash) // Should output: 2y8vHb9xK6RSxN8EXMeAEUiYtZk
Making request
Authenticated requests must include the ISO-fromatted date, and a salt-signature combination in the form of:
<salt>:<signature>
. These can be provided as query parameters:
?date=2019-03-08T19:31:12.213831%2B00:00&signature=0EvkK316T-sBLA:YMIVXikJWAiiR3q-JMz1v2Mfmx3gTXJVNqme5kyaqrY
Or they can be provided as request headers:
X-Signature-Date: 2019-03-08T19:31:12.213831+00:00
X-Signature: 0EvkK316T-sBLA:YMIVXikJWAiiR3q-JMz1v2Mfmx3gTXJVNqme5kyaqrY
Development
Dependencies are managed using go modules. Vendored dependencies are stored in vendor
folder by using go mod vendor
.
On Windows, it is necessary to install gcc
in order to compile mattn/go-sqlite3
.
MinGW or TDM-GCC should work fine.
If you experience very slow builds each time, it may be that you need to first run
$ go build -a .
to make subsequent builds much faster.
Development of the templates and static assets likely requires using
node
and npm
. Install these tools in the normal way.
From the handlers/templates/static
folder, run
$ npm install
to pull in the static dependencies. These are referenced in the
package.json
file.
Then to build the minified version, run:
$ npm run build
Built static assets are saved to handlers/templates/static/dist
and included
via go:embed
into the final executable.
Modifying the .go
files or anything under handlers/templates
always requires
re-running go build .
.
Changes
See CHANGELOG.
โจ
Contributors Thanks goes to these wonderful people (emoji key):
This project follows the all-contributors specification. Contributions of any kind welcome!