Aircrack-gui is a python gui for aircrack-ng using gtk3.0.

The priority was to make every step intuitive and easy)

You must use aircrack-gui only on networks you have permission to.

• Python3
• termcolor, PyGObject
• aircrack-ng

Install:

pip3 install aircrack-gui

Run: (anywhere)

aircrack-gui.py

Install:

git clone https://github.com/Cod3dDOT/aircrack-gui
cd aircrack-gui
pip install -r requirements.txt

Run: (make sure you are in right directory)

python3 aircrack-gui.py

If any interface will be found, a window will open with the option to choose an interface, scan, start airmon-ng or open aircrack-ng.

Step 1: Set path (default: /home/SUDO_USER/Desktop/aircrack-ng/wifi/)

Step 2: Press 'Scan for networks', wait for ~5 seconds (the main window can become unresponsive, that's normal). A new window will show up with a network list. Choose desired network, check that it has WPA2 encryption (right now WEP/WPA1 are not implemented), hit 'Start Airmon-ng on BSSID: NETWORK_BSSID'.

Step 3: Aireplay-ng window will show up. Set amount of deauth packets to send (default: 10) and wait for station to appear (you can choose if several are found or type in a station mac address manually (format: xx-xx, xx:xx, xxxx)). Hit 'Run deauth (aireplay-ng)'. If you see 'Success' on top of the window, then a handshake was received successfully. If not, try changing the station or amount of packets.

P.S: If no stations are found, your signal strength is probably too low. Signal strength can be checked when you select your network in Step 2 and is measured from 0 to 100, higher being better.

Step 4: Now, you can close aireplay-ng window. In the main window, press 'Open aircrack-ng', select .cap file (capture file located wherever you set it to in Step 1). Select a wordlist, hit 'Start aircrack-ng / hashcat' and hope for the best ;)

P.S If you want to convert your .cap to .22000 manually, visit official hashcat conversion website. Or, you can install hcxtools and .22000 files will be generated automatically.

Can be found by typing python3 aircrack-gui.py -h.

Application Options:
  --nokill                   Do not run 'airmon-ng check kill'. Will retain internet connection on other devices, but is probably a bad idea.
  --noclean                  Do not clean .csv files generated by airodump-ng when scanning for clients.
  --nolog                    Do not print anything to console.
  --display=DISPLAY          X display to use

• Change network scanning from nmcli to airmon-ng