A handy installation script that makes installing Klipper (and more) a breeze!

For downloading this script it is necessary to have git installed.
If you haven't, please run sudo apt-get install git -y to install git first.
After git is installed, use the following commands in the given order to download and execute the script:

cd ~

git clone https://github.com/th33xitus/kiauh.git

./kiauh/kiauh.sh

📢 Disclaimer: Usage of this script happens at your own risk!

📋 Please see the Changelog for possible important changes!

• Tested only on Raspberry Pi OS Lite (Debian 10 Buster)
  • Other Debian based distributions can work
  • Reported to work on Armbian too
• During the use of this script you might be asked for your sudo password. There are several functions involved which need sudo privileges.

Klipper	Moonraker	Mainsail
by KevinOConnor	by Arksine	by mainsail-crew
Fluidd	KlipperScreen	OctoPrint
by fluidd-core	by jordanruthe	by OctoPrint
Moonraker-Telegram-Bot	PrettyGCode for Klipper	Obico for Klipper
by nlef	by Kragrathea	by Obico

• A big thank you to lixxbox for that awesome KIAUH-Logo!
• Also a big thank you to everyone who supported my work with a Ko-fi !
• Last but not least: Thank you to all contributors and members of the Klipper Community who like and share this project!