Disable AP about wican-fw HOT 5 OPEN

@meatpiHQ could this logic work?

Mode 1: AP only, no station (default)

Mode 2:

Leave station mode on constantly.

When device is first plugged in enable AP for 5 mins. If nothing connects in those 5 mins it just turns off.

That way if someone needs to update details, they can unplug it, then plug it back in to enable the AP and connect to it. Could also then add an option on web UI to reboot without AP to disable again after your done.

Would let the AP be off 99% of the time, and easy enough to enable it by unplugging and replugging when needed

from wican-fw.

Yes please!

I would rather not go round advertising that I have a WiCAN device in my car.

from wican-fw.

Ok looks like this is the most popular feature request, I'll add this in the next update. But the problem is that when you're on the road away from your wifi it will still be broadcasting. I did solve this by adding a button on WiCAN Pro but unfortunately WiCAN doesn't have a button.

from wican-fw.

@jay-oswald I like that idea. Is it standard that OBD-II ports are always powered, even if ignition is off?

from wican-fw.

@njh yes there are constant power pins on obd2 port. Which im pretty sure wican already uses

from wican-fw.