Toyota Rav4 SoC setup about wican-fw HOT 5 CLOSED

@phanja alright try this please, update the firmware then in the Automate tab,

1- click on choose file and select wican_vehicle_profiles_v142.json
2- click update "Car Data"
3- Refresh the page
4- enable "car specific"
5- Select Rav4
6- Set your Destination Topic and Time, then click store
7- Reboot

wican-fw_v322_hv300.zip
wican_vehicle_profiles_v142.json

from wican-fw.

Thanks I now get the SoC readings. Any resources on home assistant discovery? I'm gonna go ahead and add it through the config yaml

from wican-fw.

@phanja the discovery feature is not yet functional, I will release this firmware later this week with this feature enabled.

from wican-fw.

@phanja I assume you clicked on the SoC sensor and the repeating PID request is the SoC ?

What was the SoC at the time of the log. It will also be helpful if you make another log with different SoC value.

>015B2
7EB03415BE0
7EA03415BE0

>015B2
7EA03415BE0
7EB03415BE0

from wican-fw.

it was either 87.8 or 87.05. I'll get more logs of lower values as it depletes this week.

here it is at 83.14:
log 83.txt

not sure if this is any help but I saw others using "A*20 / 51" to get it to work with torque pro

from wican-fw.