mccallumdillon / hackintosh-z590-vision-d Goto Github PK

Hey :D Do you have all Settings of you're BIOS? What tool did you use to create the installer? macrecovery? Please help :D

Hi,

Thanks for the project, I'm interested since I have the same motherboard with the i9-10900 (no K).

However, I cannot find (and disable) the Serial Port option in BIOS. I have the latest BIOS version (F5d). Where is the option located, please?

I have a few small bugs but it's not the point to post them here ;-)

Regards.

Hi there!

I've been playing around in optimising my z590 Vision D - i9 11900k - RX 6600 setup lately with my limited but growing knowledge of OpenCore.
The Dortania guide states that SSDT-RHUB.aml is not necessary for Gigabyte motherboards. I see you have it in your config.
Can you elaborate on why you use it?

Edit: Btw, thanks a lot for sharing your work, it has helped me immensely.

Cheers!

First off - moving away from the Olarilla stuff was huge, just seems to be like more of a headache when I've experimented.

Second - do you have any issue with your thunderbolt resetting during the apple boot? When this happens my interface seems to disconnect and lose signal clock.

Hello

I have a question

intel uhd 630 igpu headless working?

Hope this helps.

https://github.com/oobidub/CommanderProFix

Hi, May I ask about the thunderbolt, can it be hotplug?

Hello Friend, how are you?

Sorry for the contact here, but I have no way out.

I bought a z590 and the hackintosh is ok, but the mobo has been bothering me in some ways.

It takes ~45 seconds to power up and complete the POST, then it starts loading the OS (Opencore, Windows, macOS, whatever).

When I turn on the mobo after turning the PSU off and on, the board turns on, after a few seconds it turns off and on again. This only happens when I disconnect the PSU from power.

To access the BIOS (DEL) or boot menu (f12), it is extremely slow, it says "Entering boot..." or "Entering setup...". After about 8 seconds the BIOS or Boot menu opens

Enabling XMP for me is impossible, and I have good memories (Corsair 4000Mhz Dominator CL19) and they work normally in another setup.

I recorded some videos with the examples, can you tell me if this happens to you too?

Gigabyte Z590 Vision D - Power On after off/on PSU [ON,OFF,than ON again] + Completing POST - 40s
https://youtu.be/CgCR0BUwh54

Gigabyte Z590 Vision D - Power On + Entering BIOS - 27s
https://youtu.be/_iqI--xupck

Gigabyte Z590 Vision D - Power On + Entering Boot Menu - 29s
https://youtu.be/aT1z02Yktv8

Thank you very much.
Regards,
Gabriel Luchina