homeassistant-wallpannel-v2's Introduction

Homeassistant-wallpannel-V2

Touch Screen

This is my (22nd) attempt of home control panel

Used Hardware:

How-To

use raspberry pi imager
select os in my case Raspberry PI OS (Legacy, 64bit) Bullseye
shift+ctl+x
check diasble overscan
set hostname
enable ssh
enable vnc
(optional) configure WIFI
set locale settings
Flash

install rasbian bullseye

sudo apt update && sudo apt upgrade -y

sudo nano /etc/xdg/lxsession/LXDE-pi/autostart

@lxpanel --profile LXDE-pi
@pcmanfm --desktop --profile LXDE-pi
@xscreensaver -no-splash
@xrandr --output HDMI-1 --rotate right
@chromium-browser --start-fullscreen --start-maximized --kiosk --noerrdialogs --disable-default-apps --disable-single-click-autofill --disable-translate-new-ux --disable-translate --disable-cache --disk-cache-dir=/dev/null --disk-cache-size=1 --reduce-security-for-testing --enable-features=OverlayScrollbar --touch-events --noerrdialogs --disable-infobars --kiosk http://ha-main.local:8123/kiosk-tablet/home?BrowserID=Kiosk

sudo nano /etc/lightdm/lightdm.conf

add under seat section

[Seat:*]
xserver-command=X -s 0 dpms
xserver-command=X -nocursor

Rotate Touch digitalizer

Navigate to sudo nano /usr/share/X11/xorg.conf.d/40-libinput.conf

Find the

Section "InputClass"
        Identifier "libinput touchpad catchall"
        .......

And replace with

Section "InputClass"
        Identifier "libinput touchpad catchall"
        MatchIsTouchscreen "on"
        Option "CalibrationMatrix" "0 1 0 -1 0 1 0 0 1"
        MatchDevicePath "/dev/input/event*"
        Driver "libinput"
EndSection