mattwestb / efr32-fw Goto Github PK

Hi,
I should flash your firmware on moes gateway that have the ZS3L zigbee module, how can I flash it?
Through serial?

Hi, thanks a lot for providing updated firmwares for these devices!

Just to let you know, the latest version of the firmware for TUYA TYGWZ01 in this repo does not seem to work properly.
When trying to pair devices (only tried with IKEA remotes), the handshake is not successful. The device is detected, but pairing ultimately fails.

The previous firmware version (6.10.0.0) you also provided seems to work fine.

Hello,
First of all i would like to say thank you for your commitment and effort on this!
I recently bought Tuya Smart Gateway model GW-018 (wifi + ble + zigbee) (https://a.aliexpress.com/_EjwjehJ)
My hope is to use it as "open" zigbee Gateway bridge detaching it from Tuya Cloud.
From PCB I see the well known ZS3L plus wifi+ble on separate WBRG1.

Do you have any suggestion? Do you think something feasible?
Thanks!
Luca

Hi @MattWestb could you share the app.c used with your Billy router FW? I'm attempting to make router fw for the mgm12 and 21 modules and not having much luck.

Thanks!

Have you figured out how to define the manufacturer and board name in the project before compiling the fw?

it looks like these are the keys:

I tried setting like this but it doesn't work:

Hello,

Can you please check if the pinout below is correct.
Also it seems that this module has different pad numbers as per table 2-1 from Tuya V2.0.0.
Can you also provide connections between TYZS4 pads and RTL8196E CPU.

Thank you.