In version 3.0.0 the original sensor is discontinued. There are now individual entities for each piece of data. These new sensor also update every 10 minutes compared to the old sensor which updated every 30 minutes.

Before installing version 3.0.0 remove the integration from the "Device and Services" menu. Then install version 3.0.0 and restart before finally setting up the integration again.

ecowater_softener is a custom component for Home Assistant. The integration allows you to pull data from your Ecowater water softener.

1. Go to HACS -> Integrations -> Click +
2. Search for "Ecowater Softener" and add it to HACS
3. Restart Home Assistant
4. Go to Settings -> Devices & Services -> Integrations -> Click +
5. Search for "Ecowater Softener" and follow the set up instructions

Copy the custom_components/ecowater_softener folder into the config folder.

To add an Ecowater water softener, go to Configuration > Integrations in the UI. Then click the + button and from the list of integrations select Ecowater Softener. You should then see a dialog like the one below.

You then need to enter the information you use to login on https://wifi.ecowater.com/Site/Login. (Serial Number = DSN)

Then you will need to select the date format that your Ecowater device uses. You can check this under the Out of Salt Date and Last Recharge at https://wifi.ecowater.com/Site/Login.

This will then create an device name "Ecowater SERIAL_NUMBER".

This device will then have the entities show below.

• @ThePrincelle - French Translations
• @kylejohnson - Discovering and documenting the Ecowater API

MIT