#Introduction The structure of this program is based on the guides for IOT Hub found on GitHub and in the documentation of Azure docs.
#Guides Get started: https://docs.microsoft.com/en-us/azure/iot-hub/iot-hub-node-node-getstarted#create-a-simulated-device-app Connect Device: https://docs.microsoft.com/en-us/azure/iot-hub/iot-hub-node-node-getstarted#create-a-simulated-device-app Device Managment: https://docs.microsoft.com/en-us/azure/iot-hub/iot-hub-node-node-getstarted#create-a-simulated-device-app
#Connect to CHIP To connect the C.H.I.P that Mathias had shown me use the following commands while connected to it via serial on 115200 baud. The below will allow you to connect to WiFi. I suggest creating an autoscript for this so that onPower it will connect to WiFi.
SSH COM# Serial: 115200 User: chip Pass: chip
nmcli device wifi list Sudo nmcli device wifi connect '(name/SSID)' ifname wlan0 Sudo nmcli device wifi connect '(name/SSID)' password '(wifi password)' ifname wlan0
If itβs a BSSID Sudo nmcli device wifi connect '(name/SSID)' password '(wifi password)' ifname wlan0 hidden yes