- This library must work with newest Heltec_ESP32 development framework
- For now, new features still not included in the release version, must install this framework via Git.
- This library is make LoRaWAN 1.0.2 protocol running with ESP32. Only support the ESP32 + LoRa series products made by HelTec Automation(TM), and a LoRa gateway is must needed;
- LoRaWAN relevant parameters are defined in the .ino file;
- This library is transplanted form https://github.com/Lora-net/LoRaMac-node;
- Use RTC and deep sleep mode supported, only few millisecond wake up in a cycle;
- Heltec LoRa Node Family.
To install this library:
- install it using the Arduino Library manager ("Sketch" -> "Include Library" -> "Manage Libraries..."), or
- download a zip file from GitHub using the "Download ZIP" button and install it using the IDE ("Sketch" -> "Include Library" -> "Add .ZIP Library..."
- clone this git repository into your sketchbook/libraries folder.
For more info, see https://www.arduino.cc/en/Guide/Libraries
The ESP32_LoRaWAN library provides a fairly complete LoRaWAN Class A and Class C implementation, the newest updated February 10th, 2020 already have full region support (KR920, AS923, US915 etc.).
The following functions included:
- LoRaWAN protocol V1.0.2 Class A and Class C;
- Use ESP32's internal RTC(15KHz);
- All ESP32 + LoRa boards made by Heltec Automation(TM) can use this library;
- Support deep sleep and stop mode;
- Receive and print downlink payload;
- Print and OLED show downlink data length and RSSI;
- An unique license relate to Chip ID is needed, you can check your license here: http://www.heltec.cn/search/
- Gateway: HT-M01 Mini LoRa Gateway + Raspberry Pi Zero W
- Node: WIFI LoRa 32 V2, Wireless Stick, Wireless Stick Lite
- LoRaServer:
- Aliyun ECS + Ubuntu 16.04 + loraserver.io;
- TTN
- Arudino 1.8.10
working band | status |
---|---|
EU433 | not test |
CN470 | work well |
EU863 | work well |
US915 | work well |
AU916 | not test |
CN779 | not test |
AS923 | not test |
KR920 | not test |
IN865 | not test |
US915_HYBRID | not test |
What certainly works:
- Sending payload to a LoRa gateway via LoRaWAN protocol;
- Encryption and message integrity checking;
- Over-the-air activation (OTAA / joining);
- Deep sleep and wake up;
- Class A operation;
- Class C operation;
- ABP mode.
What has not been tested:
- Receiving downlink packets in the RX2 window.
The only different with a common Arduino library is need a unique license. It's relate to ESP32 Chip ID.
- Use this simple example to read your Chip ID: https://github.com/Heltec-Aaron-Lee/WiFi_Kit_series/tree/master/esp32/libraries/ESP32/examples/ChipID/GetChipID
- http://www.heltec.cn/search/ Open this page and input your ChipID
Only the boards made after August 2018 can be checked from this page, if you have a former version, you can mail to [email protected] and improve you already have a Heltec Automation made board.
Choose working band you need In the Arduino tools menu:
For more details about how to use this library, please refer to this document:
- Website:https://heltec.org
- Document Page: https://docs.heltec.cn
- Forum: http://community.heltec.cn/
- Twitter: https://twitter.com/HeltecOrg
- Face Book: https://www.facebook.com/heltec.automation.5
Before reporting an issue, make sure you've searched for similar one that was already created. Also make sure to go through all the issues labelled as for reference.
Also you can talk in our forum: http://community.heltec.cn/