manna-harbour / miryoku Goto Github PK
View Code? Open in Web Editor NEWMiryoku is an ergonomic, minimal, orthogonal, and universal keyboard layout.
Miryoku is an ergonomic, minimal, orthogonal, and universal keyboard layout.
Update with recent changes.
Normal GitHub Actions workflow builds are working fine for me. But if I try to use the NOREVERSEANGLE option, I receive a parse error from kmonad when I try to run it:
kmonad: Parse error at 15:3:
|
15 | tap q w e r i o p [ ]
| ^
unexpected 't'
expecting ')'
For context, here are more of the lines around this:
(defsrc
grv 1 2 3 4 8 9 0 - =
tap q w e r i o p [ ]
caps a s d f k l ; ' ent
z x c , . /
)
I'm not up to speed on the syntax, but it doesn't like the t
in tap
.
If you want to repro it, these are the parameters for the workflow I'm using:
MIRYOKU_CLIPBOARD=MAC
MIRYOKU_MAPPING=NOREVERSEANGLE
MIRYOKU_KMONAD_OS=MAC
This is needed in QWERTY for changing layouts on the host, and would also simplify the lite
mappings on 60_ansi
/ Miryoku KMonad.
Replace both with macros and add option to swap definitions.
Managed to get keebio/iris6a to compile with miryoku by using CONSOLE_ENABLE=off to get around it being 384 bytes too large.
However, it's not recognized by VIA. The default layout is. Not sure if it has to do something with console_enable.
Unsuccessfully tried c2json (no idea why it fails), and QMK2Via (which fails specifically on the Keebio folder with an unexpected error).
Also tried building in the dev branch, which segfaults.
I think I could've just manually built this into VIA in the same amount of time I've spent :)
Any help would be appreciated. Sorry for the weird post, I swapped my space and enter keys.
I was using QMK for a while and after I built my 2nd board with nice-nanos I realized that Miryoku ZMK doesn't seems to work the same as miryouku qmk - for example I can't move my mouse pointer with zmk (there is no such issues with qmk). Also karabiner keybindings doesn't work with miryoku zmk (everything is ok with qmk).
All settings just default (only vi mode). Am I doing something wrong? I think miryouku zmk/qmk should have same behavior with same workflow settings?
Here is a testing branch: https://github.com/manna-harbour/qmk_firmware/blob/miryoku-ergotravel-test/users/manna-harbour_miryoku/miryoku.org#ergotravel
Let me know when it's been tested and I'll add it to the miryoku
branch.
MIRYOKU_LAYERS=FLIP
: https://github.com/manna-harbour/qmk_firmware/blob/miryoku-flip-test/users/manna-harbour_miryoku/miryoku.org#flipMIRYOKU_NAV=INVERTEDT
: https://github.com/manna-harbour/qmk_firmware/blob/miryoku-flip-test/users/manna-harbour_miryoku/miryoku.org#inverted-tSupport various mods customisations. E.g.
Fix mods issues:
Miscellaneous small issues:
#define LAYER_STATE_16BIT
miryoku
branch with upstream QMK master: cherry pick instead, or drop [local]
commits firstset_single_persistent_default_layer()
)Miscellaneous small issues:
,
, .
, and /
to get <
, >
, and ?
#error
if no match,
, .
, and /
to get <
, >
, and ?
#error
if no matchlayers
enum to manna-harbour_miryoku.h
#define LAYER_STATE_16BIT
miryoku
branch with upstream QMK master: cherry pick instead, or drop [local]
commits firstset_single_persistent_default_layer()
)-
in Caps Word #202defsrc
in custom_config.h
miryoku_layer_selection.h
or replace with makeSteps to reproduce:
-Open miryoku.org in emacs
-Run org-babel-tangle with C-c C-v t
Operating Systems:
-Arch Linux
-Mac 10.14
When generating with babel tangle, many files have an empty main function appended.
For example, the file /layouts/community/split_3x6_3/manna-harbour_miryoku/config.h:
int main() {
// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*-
#pragma once
#define LAYOUT_miryoku(\
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\
N30, N31, K32, K33, K34, K35, K36, K37, N38, N39\
)\
LAYOUT_split_3x6_3(\
KC_NO, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, KC_NO,\
KC_NO, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, KC_NO,\
KC_NO, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, KC_NO,\
K32, K33, K34, K35, K36, K37\
)
return 0;
}
This is a list of the files that have this appended to it:
keyboards/atreus/keymaps/manna-harbour_miryoku/config.h
keyboards/atreus/keymaps/manna-harbour_miryoku/keymap.c
keyboards/for_science/keymaps/manna-harbour_miryoku/config.h
keyboards/for_science/keymaps/manna-harbour_miryoku/keymap.c
keyboards/gergo/keymaps/manna-harbour_miryoku/config.h
keyboards/gergo/keymaps/manna-harbour_miryoku/keymap.c
keyboards/keebio/iris/keymaps/manna-harbour_miryoku/config.h
keyboards/keebio/iris/keymaps/manna-harbour_miryoku/keymap.c
keyboards/kyria/keymaps/manna-harbour_miryoku/config.h
keyboards/kyria/keymaps/manna-harbour_miryoku/keymap.c
keyboards/lily58/keymaps/manna-harbour_miryoku/config.h
keyboards/lily58/keymaps/manna-harbour_miryoku/keymap.c
keyboards/moonlander/keymaps/manna-harbour_miryoku/config.h
keyboards/moonlander/keymaps/manna-harbour_miryoku/keymap.c
keyboards/redox_w/keymaps/manna-harbour_miryoku/config.h
keyboards/redox_w/keymaps/manna-harbour_miryoku/keymap.c
layouts/community/60_ansi/manna-harbour_miryoku/config.h
layouts/community/60_ansi/manna-harbour_miryoku/keymap.c
layouts/community/ergodox/manna-harbour_miryoku/config.h
layouts/community/ergodox/manna-harbour_miryoku/keymap.c
layouts/community/ortho_4x12/manna-harbour_miryoku/config.h
layouts/community/ortho_4x12/manna-harbour_miryoku/keymap.c
layouts/community/ortho_5x15/manna-harbour_miryoku/config.h
layouts/community/ortho_5x15/manna-harbour_miryoku/keymap.c
layouts/community/planck_mit/manna-harbour_miryoku/config.h
layouts/community/planck_mit/manna-harbour_miryoku/keymap.c
layouts/community/split_3x5_3/manna-harbour_miryoku/config.h
layouts/community/split_3x5_3/manna-harbour_miryoku/keymap.c
layouts/community/split_3x6_3/manna-harbour_miryoku/config.h
layouts/community/split_3x6_3/manna-harbour_miryoku/keymap.c
users/manna-harbour_miryoku/config.h
users/manna-harbour_miryoku/manna-harbour_miryoku.c
users/manna-harbour_miryoku/manna-harbour_miryoku.h
Support easy customising of layers by allowing substitute layer data to be defined outside the keymap.
Support easy addition of custom layers by allowing them to be defined outside the keymap.
There are some options described in #17 and an implementation in manna-harbour/qmk_firmware#32.
I would like to use Miryoku on my Keyboardio Atreus, which is supported by QMK since a while. I am happy to do the porting and testing, but I have no experience with QMK, so I would be glad about some pointers to get started and general support as needed.
Create a Miryoku implementation for ZMK.
Add options to emulate the tertiary thumb keys with a combos of primary and secondary, the inner index column keys with combos of index and middle, and the pinkie column keys with combos of middle and ring. This would be an alternative to stretching and would support boards that have eliminated some of those keys.
Currently RGB, bluetooth, etc. are on Media but there is not enough space for all keyboard control keycodes. Add a new layer or layers for keyboard control.
The Miryoku documentation should be updated to reflect the current layout definitions on the Colemak-DH website.
"Colemak-DHm" (the variant with M in the middle row) is now the default, recommended layout, so the Miryoku default can be renamed simply "Colemak-DH".
Miryoku also provides an alternative layout called "Colemak-DH" (with K in the middle row). This variant is now semi-deprecated on the DH website, but is still used by some and is known as "Colemak-DHk" to avoid confusion. Suggest either removing this variant or renaming it to "Colemak-DHk".
custom_keymap.c
/ custom_keymap.dtsi
for custom code / behaviours.See #15 for the original discussion.
Hi,
I am new to miryoku and I am trying to do a very basic vanilla build for mty new Kyria keyboard.
If I read the instructions correctly I would have to merge QMK and miryoku_qmk branches together with:
git clone [email protected]:qmk/qmk_firmware.git
cd qmk_firmware
git remote add miryoku_qmk [email protected]:manna-harbour/miryoku_qmk.git
git fetch miryoku_qmk
git checkout --track miryoku_qmk/miryoku
make git-submodule
git checkout -b miryoku-merge-master
git revert --no-edit `git log --grep='^\[miryoku-github\]' --pretty='format:%H' | tr '\n' ' '`
git fetch origin # Maybe not even needed, as I just did a checkout
git merge origin/master
But when I try it on a brand new directory, I get the following error after the last command:
Auto-merging users/manna-harbour_miryoku/manna-harbour_miryoku.c
CONFLICT (content): Merge conflict in users/manna-harbour_miryoku/manna-harbour_miryoku.c
Automatic merge failed; fix conflicts and then commit the result.
Checking the differences I see:
diff --cc users/manna-harbour_miryoku/manna-harbour_miryoku.c
index 5de5d9b129,389580759b..0000000000
--- a/users/manna-harbour_miryoku/manna-harbour_miryoku.c
+++ b/users/manna-harbour_miryoku/manna-harbour_miryoku.c
@@@ -17,14 -17,14 +17,22 @@@ MIRYOKU_LAYER_LIS
#undef MIRYOKU_X
};
++<<<<<<< HEAD
+void u_td_fn_boot(qk_tap_dance_state_t *state, void *user_data) { \
++=======
+ void u_td_fn_boot(tap_dance_state_t *state, void *user_data) {
++>>>>>>> origin/master
if (state->count == 2) {
reset_keyboard();
}
}
#define MIRYOKU_X(LAYER, STRING) \
++<<<<<<< HEAD
+void u_td_fn_U_##LAYER(qk_tap_dance_state_t *state, void *user_data) { \
++=======
+ void u_td_fn_U_##LAYER(tap_dance_state_t *state, void *user_data) { \
++>>>>>>> origin/master
if (state->count == 2) { \
default_layer_set((layer_state_t)1 << U_##LAYER); \
} \
@@@ -32,7 -32,7 +40,11 @@@
MIRYOKU_LAYER_LIST
#undef MIRYOKU_X
++<<<<<<< HEAD
+qk_tap_dance_action_t tap_dance_actions[] = {
++=======
+ tap_dance_action_t tap_dance_actions[] = {
++>>>>>>> origin/master
[U_TD_BOOT] = ACTION_TAP_DANCE_FN(u_td_fn_boot),
#define MIRYOKU_X(LAYER, STRING) [U_TD_U_##LAYER] = ACTION_TAP_DANCE_FN(u_td_fn_U_##LAYER),
MIRYOKU_LAYER_LIST
(END)
Am I doing something wrong? Is something broken?
Full list of the commands executed from above:
stratos@iocaine
/mnt/projects/sources
❯ git clone [email protected]:qmk/qmk_firmware.git
Cloning into 'qmk_firmware'...
remote: Enumerating objects: 512800, done.
remote: Counting objects: 100% (24/24), done.
remote: Compressing objects: 100% (19/19), done.
remote: Total 512800 (delta 10), reused 14 (delta 5), pack-reused 512776
Receiving objects: 100% (512800/512800), 258.03 MiB | 13.04 MiB/s, done.
Resolving deltas: 100% (287377/287377), done.
Updating files: 100% (39069/39069), done.
stratos@iocaine
/mnt/projects/sources
➜ cd qmk_firmware
stratos@iocaine
…/qmk_firmware [ master] [🐍 v3.10.10] [⍱ v2.3.4]
✦ ➜ git remote add miryoku_qmk [email protected]:manna-harbour/miryoku_qmk.git
stratos@iocaine
…/qmk_firmware [ master] [🐍 v3.10.10] [⍱ v2.3.4]
➜ git fetch miryoku_qmk
remote: Enumerating objects: 1583, done.
remote: Counting objects: 100% (630/630), done.
remote: Compressing objects: 100% (5/5), done.
remote: Total 1583 (delta 625), reused 625 (delta 625), pack-reused 953
Receiving objects: 100% (1583/1583), 371.29 KiB | 1.23 MiB/s, done.
Resolving deltas: 100% (1100/1100), completed with 153 local objects.
From github.com:manna-harbour/miryoku_qmk
* [new branch] fingerpunch-test -> miryoku_qmk/fingerpunch-test
* [new branch] keyboardio-model01-no-leds-test -> miryoku_qmk/keyboardio-model01-no-leds-test
* [new branch] klor-keyboard-test -> miryoku_qmk/klor-keyboard-test
* [new branch] klor-test -> miryoku_qmk/klor-test
* [new branch] miryoku -> miryoku_qmk/miryoku
* [new branch] miryoku-20200608 -> miryoku_qmk/miryoku-20200608
* [new branch] miryoku-20210703 -> miryoku_qmk/miryoku-20210703
* [new branch] miryoku-20211015 -> miryoku_qmk/miryoku-20211015
* [new branch] miryoku-20220227 -> miryoku_qmk/miryoku-20220227
* [new branch] miryoku-20220706 -> miryoku_qmk/miryoku-20220706
* [new branch] miryoku-20220926 -> miryoku_qmk/miryoku-20220926
* [new branch] miryoku-20221121 -> miryoku_qmk/miryoku-20221121
* [new branch] miryoku-mousebuttons-tmp -> miryoku_qmk/miryoku-mousebuttons-tmp
* [new branch] rollow-test -> miryoku_qmk/rollow-test
* [new branch] split_3x5_2-test -> miryoku_qmk/split_3x5_2-test
* [new branch] yunomi-test -> miryoku_qmk/yunomi-test
stratos@iocaine
…/qmk_firmware [ master] [🐍 v3.10.10] [⍱ v2.3.4] [⏱ 3s ]
➜ git checkout --track miryoku_qmk/miryoku
branch 'miryoku' set up to track 'miryoku_qmk/miryoku'.
Switched to a new branch 'miryoku'
stratos@iocaine
…/qmk_firmware [ miryoku] [🐍 v3.10.10] [⍱ v2.3.4]
➜ make git-submodule
QMK Firmware 0.19.0
Submodule 'lib/chibios' (https://github.com/qmk/ChibiOS) registered for path 'lib/chibios'
Submodule 'lib/chibios-contrib' (https://github.com/qmk/ChibiOS-Contrib) registered for path 'lib/chibios-contrib'
Submodule 'lib/googletest' (https://github.com/qmk/googletest) registered for path 'lib/googletest'
Submodule 'lib/lufa' (https://github.com/qmk/lufa) registered for path 'lib/lufa'
Submodule 'lib/pico-sdk' (https://github.com/qmk/pico-sdk.git) registered for path 'lib/pico-sdk'
Submodule 'lib/printf' (https://github.com/qmk/printf) registered for path 'lib/printf'
Submodule 'lib/vusb' (https://github.com/qmk/v-usb) registered for path 'lib/vusb'
Cloning into '/mnt/projects/sources/qmk_firmware/lib/chibios'...
remote: Enumerating objects: 255179, done.
remote: Counting objects: 100% (13923/13923), done.
remote: Compressing objects: 100% (5224/5224), done.
remote: Total 255179 (delta 9299), reused 12477 (delta 8354), pack-reused 241256
Receiving objects: 100% (255179/255179), 169.54 MiB | 11.19 MiB/s, done.
Resolving deltas: 100% (193342/193342), done.
Cloning into '/mnt/projects/sources/qmk_firmware/lib/chibios-contrib'...
remote: Enumerating objects: 23254, done.
remote: Counting objects: 100% (270/270), done.
remote: Compressing objects: 100% (160/160), done.
remote: Total 23254 (delta 125), reused 232 (delta 107), pack-reused 22984
Receiving objects: 100% (23254/23254), 9.72 MiB | 3.61 MiB/s, done.
Resolving deltas: 100% (14837/14837), done.
Cloning into '/mnt/projects/sources/qmk_firmware/lib/googletest'...
remote: Enumerating objects: 22998, done.
remote: Total 22998 (delta 0), reused 0 (delta 0), pack-reused 22998
Receiving objects: 100% (22998/22998), 8.96 MiB | 12.49 MiB/s, done.
Resolving deltas: 100% (16989/16989), done.
Cloning into '/mnt/projects/sources/qmk_firmware/lib/lufa'...
remote: Enumerating objects: 76748, done.
remote: Counting objects: 100% (3098/3098), done.
remote: Compressing objects: 100% (73/73), done.
remote: Total 76748 (delta 3049), reused 3031 (delta 3025), pack-reused 73650
Receiving objects: 100% (76748/76748), 18.93 MiB | 3.80 MiB/s, done.
Resolving deltas: 100% (61670/61670), done.
Cloning into '/mnt/projects/sources/qmk_firmware/lib/pico-sdk'...
remote: Enumerating objects: 6628, done.
remote: Total 6628 (delta 0), reused 0 (delta 0), pack-reused 6628
Receiving objects: 100% (6628/6628), 2.57 MiB | 6.35 MiB/s, done.
Resolving deltas: 100% (3469/3469), done.
Cloning into '/mnt/projects/sources/qmk_firmware/lib/printf'...
remote: Enumerating objects: 1578, done.
remote: Counting objects: 100% (627/627), done.
remote: Compressing objects: 100% (100/100), done.
remote: Total 1578 (delta 568), reused 538 (delta 522), pack-reused 951
Receiving objects: 100% (1578/1578), 793.98 KiB | 4.59 MiB/s, done.
Resolving deltas: 100% (979/979), done.
Cloning into '/mnt/projects/sources/qmk_firmware/lib/vusb'...
remote: Enumerating objects: 1372, done.
remote: Counting objects: 100% (73/73), done.
remote: Compressing objects: 100% (50/50), done.
remote: Total 1372 (delta 32), reused 46 (delta 18), pack-reused 1299
Receiving objects: 100% (1372/1372), 476.46 KiB | 2.92 MiB/s, done.
Resolving deltas: 100% (832/832), done.
Submodule path 'lib/chibios': checked out '0e9d558b525a8f28285f3bb509fd48a897c43151'
Submodule path 'lib/chibios-contrib': checked out 'bb8356fb5a3a9bbc1561826f174a9a631c614546'
Submodule 'ext/mcux-sdk' (https://github.com/NXPmicro/mcux-sdk) registered for path 'lib/chibios-contrib/ext/mcux-sdk'
Cloning into '/mnt/projects/sources/qmk_firmware/lib/chibios-contrib/ext/mcux-sdk'...
remote: Enumerating objects: 43478, done.
remote: Counting objects: 100% (8345/8345), done.
remote: Compressing objects: 100% (2770/2770), done.
remote: Total 43478 (delta 5515), reused 8229 (delta 5489), pack-reused 35133
Receiving objects: 100% (43478/43478), 98.27 MiB | 26.47 MiB/s, done.
Resolving deltas: 100% (29935/29935), done.
Submodule path 'lib/chibios-contrib/ext/mcux-sdk': checked out '102c27d7cc2aaac87c133702e7829a105e0cb433'
Submodule path 'lib/googletest': checked out 'e2239ee6043f73722e7aa812a459f54a28552929'
Submodule path 'lib/lufa': checked out '549b97320d515bfca2f95c145a67bd13be968faa'
Submodule path 'lib/pico-sdk': checked out '8d56ea332b3734cef0a8e61f7d61f2422bd539b1'
Submodule path 'lib/printf': checked out 'c2e3b4e10d281e7f0f694d3ecbd9f320977288cc'
Submodule path 'lib/vusb': checked out '819dbc1e5d5926b17e27e00ca6d3d2988adae04e'
stratos@iocaine
…/qmk_firmware [ miryoku] [🐍 v3.10.10] [⍱ v2.3.4] [⏱ 48s ]
➜ git checkout -b miryoku-merge-master
Switched to a new branch 'miryoku-merge-master'
stratos@iocaine
…/qmk_firmware [ miryoku-merge-master] [🐍 v3.10.10] [⍱ v2.3.4]
❯ git revert --no-edit `git log --grep='^\[miryoku-github\]' --pretty='format:%H' | tr '\n' ' '`
[miryoku-merge-master b8957d0bbf] Revert "[miryoku-github] Fix merge in workflow (#16)"
Date: Fri Apr 7 17:58:59 2023 +0200
1 file changed, 1 deletion(-)
[miryoku-merge-master b8a18ead90] Revert "[miryoku-github] Fix make git-submodule in workflow"
Date: Fri Apr 7 17:58:59 2023 +0200
1 file changed, 1 insertion(+), 3 deletions(-)
[miryoku-merge-master 60a7a0c6cc] Revert "[miryoku-github] Add choice to Build Inputs workflow for alternative layout options"
Date: Fri Apr 7 17:58:59 2023 +0200
2 files changed, 113 deletions(-)
delete mode 100644 .github/workflows/test-inputs.yml
[miryoku-merge-master 8834067176] Revert "[miryoku-github] Update actions/upload-artifact in workflow"
Date: Fri Apr 7 17:58:59 2023 +0200
1 file changed, 1 insertion(+), 1 deletion(-)
[miryoku-merge-master 4fd34a5160] Revert "[miryoku-github] Squashed local commits from previous miryoku branch"
Date: Fri Apr 7 17:58:59 2023 +0200
13 files changed, 362 deletions(-)
delete mode 100644 .github/FUNDING.yml
delete mode 100644 .github/workflows/build-example-contra.yml
delete mode 100644 .github/workflows/build-example-crkbd.yml
delete mode 100644 .github/workflows/build-example-ergodox_ez.yml
delete mode 100644 .github/workflows/build-example-keebio_levinson.yml
delete mode 100644 .github/workflows/build-example-planck_rev6.yml
delete mode 100644 .github/workflows/build-example-xmk.yml
delete mode 100644 .github/workflows/build-inputs.yml
delete mode 100644 .github/workflows/main.yml
delete mode 100644 .github/workflows/test-all-configs.yml
delete mode 100644 .github/workflows/test-build.yml
delete mode 100644 .github/workflows/test-merge.yml
delete mode 100644 readme.org
[miryoku-merge-master d648132511] Revert "[miryoku-github] Delete upstream github files"
Date: Fri Apr 7 17:58:59 2023 +0200
22 files changed, 731 insertions(+)
create mode 100644 .github/ISSUE_TEMPLATE/bug_report.yml
create mode 100644 .github/ISSUE_TEMPLATE/config.yml
create mode 100644 .github/ISSUE_TEMPLATE/feature_request.yml
create mode 100644 .github/ISSUE_TEMPLATE/other_issues.yml
create mode 100644 .github/ISSUE_TEMPLATE/zzz_blank.md
create mode 100644 .github/PULL_REQUEST_TEMPLATE.md
create mode 100644 .github/dependabot.yml
create mode 100644 .github/labeler.yml
create mode 100644 .github/workflows/api.yml
create mode 100644 .github/workflows/auto_approve.yml
create mode 100644 .github/workflows/auto_tag.yml
create mode 100644 .github/workflows/cli.yml
create mode 100644 .github/workflows/develop_update.yml
create mode 100644 .github/workflows/docs.yml
create mode 100644 .github/workflows/feature_branch_update.yml
create mode 100644 .github/workflows/format.yml
create mode 100644 .github/workflows/format_push.yml
create mode 100644 .github/workflows/labeler.yml
create mode 100644 .github/workflows/lint.yml
create mode 100644 .github/workflows/stale.yml
create mode 100644 .github/workflows/unit_test.yml
create mode 100644 readme.md
stratos@iocaine
…/qmk_firmware [ miryoku-merge-master] [🐍 v3.10.10] [⍱ v2.3.4]
➜ git fetch origin
stratos@iocaine
…/qmk_firmware [ miryoku-merge-master] [🐍 v3.10.10] [⍱ v2.3.4] [⏱ 2s ]
➜ git merge origin/master
Auto-merging users/manna-harbour_miryoku/manna-harbour_miryoku.c
CONFLICT (content): Merge conflict in users/manna-harbour_miryoku/manna-harbour_miryoku.c
Automatic merge failed; fix conflicts and then commit the result.
Auto shift can be implemented via tap hold in ZMK and KMonad where there is no native feature,
Add a toggleable copy of the base layer without dual function keys for use with games (and applications with similar needs such as KMonad).
KC_ASON
/ KC_ASOFF
/ KC_ASTG
and no AUTO_SHIFT_NO_SETUP
. Should add to keyboard control layer anyway.Currently, there is support for the Dactyl Manuform 4x5. I tried flashing my DM 5x6, which technically works but the keys are all over the place (or missing). I'm guessing the subset mapping in the config.h
file is just not compatible with the 5x6.
Most grid keyboards like planck and preonic have USB cables located on top which is a big obstacle working with laptops resulting you to push the screen further away. Rotating the keyboard 180 degrees clears the wire obstacle allowing the keyboard to touch the laptop for more stable support. I have successfully rotated the keyboard by editing the layout map and typing experience is much better actually. A rotation define statement will allow this feature much quicker.
Is there a simple way to add a variation to the NAVR layer like with the base layers? I'd prefer VI style mapping of the arrow keys (to HJKL).
Originally posted by raviolispy February 24, 2023
Using the below command, I can successfully compile for my iris rev7 (although curiously, I had to remove some things from the default version so the hex file was small enough). The other options I specified such as the QWERTY layout all work but the MIRYOKU_NAV=vi doesn't appear to shift the navigation keys to hjkl. Can anyone help please?
qmk compile -c -kb keebio/iris/rev7 -km manna-harbour_miryoku -e MIRYOKU_ALPHAS=QWERTY -e MIRYOKU_CLIPBOARD=WIN -e MIRYOKU_TAP=QWERTY -e MIRYOKU_NAV=vi
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.