manjaro-gnome / download Goto Github PK
View Code? Open in Web Editor NEWDownload Manjaro Gnome Edition - Developer Builds
Download Manjaro Gnome Edition - Developer Builds
I installed yesterday's and today's version of Manjaro (manjaro-gnome-next-21.05-development-unstable-minimal-210512-linux510). But the mouse cursor freezes instantaneously after showing the Gnome desktop. The current official version (manjaro-gnome-21.0.4-210506-linux510) does not show this problem.
Any ideas, what I could try?
INXI:
System:
Kernel: 5.13.8-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0
parameters: BOOT_IMAGE=/boot/vmlinuz-5.13-x86_64
root=UUID=e456d97d-a0b6-496d-8218-33fa1e3a30ba rw quiet
cryptdevice=UUID=79735e42-7ad3-4840-ab29-b57a2566333c:luks-79735e42-7ad3-4840-ab29-b57a2566333c
root=/dev/mapper/luks-79735e42-7ad3-4840-ab29-b57a2566333c splash apparmor=1
security=apparmor udev.log_priority=3
Desktop: GNOME 40.3 tk: GTK 3.24.30 wm: gnome-shell dm: GDM 40.1
Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Laptop System: HP product: HP EliteBook 755 G5 v: DBXEnabled
serial: <filter> Chassis: type: 10 serial: <filter>
Mobo: HP model: 83D5 v: KBC Version 08.5E.00 serial: <filter> UEFI: HP
v: Q81 Ver. 01.15.00 date: 12/29/2020
Battery:
ID-1: BAT0 charge: 42.0 Wh (100.0%) condition: 42.0/56.3 Wh (74.7%)
volts: 13.0 min: 11.6 model: Hewlett-Packard Primary type: Li-ion
serial: <filter> status: Full cycles: 197
Memory:
RAM: total: 30.31 GiB used: 2.37 GiB (7.8%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: Quad Core model: AMD Ryzen 7 PRO 2700U w/ Radeon Vega Mobile Gfx
bits: 64 type: MT MCP arch: Zen family: 17 (23) model-id: 11 (17)
stepping: 0 microcode: 8101016 cache: L2: 2 MiB bogomips: 35148
Speed: 1223 MHz min/max: 1600/2200 MHz boost: enabled Core speeds (MHz):
1: 1223 2: 1210 3: 1216 4: 1224 5: 1460 6: 1205 7: 1249 8: 1371
Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
bmi2 bpext clflush clflushopt clzero cmov cmp_legacy constant_tsc cpb cpuid
cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid f16c flushbyasid
fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb irperf lahf_lm lbrv lm mca
mce misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl
npt nrip_save nx osvw overflow_recov pae pat pausefilter pclmulqdq pdpe1gb
perfctr_core perfctr_llc perfctr_nb pfthreshold pge pni popcnt pse pse36
rdrand rdseed rdtscp rep_good sep sev sev_es sha_ni skinit smap smca sme
smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 succor svm svm_lock syscall tce
topoext tsc tsc_scale v_vmsave_vmload vgif vmcb_clean vme vmmcall wdt
xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional, STIBP:
disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Raven Ridge [Radeon Vega Series / Radeon Vega Mobile Series]
vendor: Hewlett-Packard driver: amdgpu v: kernel bus-ID: 04:00.0
chip-ID: 1002:15dd class-ID: 0300
Device-2: Chicony HP HD Camera type: USB driver: uvcvideo bus-ID: 4-2:3
chip-ID: 04f2:b5ee class-ID: 0e02
Display: wayland server: X.Org 1.21.1.2 compositor: gnome-shell driver:
loaded: amdgpu note: n/a (using device driver) - try sudo/root
display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.0x11.3")
s-diag: 583mm (23")
Monitor-1: XWAYLAND0 res: 1920x1080 hz: 60 dpi: 143
size: 340x190mm (13.4x7.5") diag: 389mm (15.3")
OpenGL: renderer: AMD Radeon Vega 10 Graphics (RAVEN DRM 3.41.0
5.13.8-1-MANJARO LLVM 12.0.1)
v: 4.6 Mesa 21.1.6 direct render: Yes
Audio:
Device-1: AMD Raven/Raven2/Fenghuang HDMI/DP Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel bus-ID: 04:00.1 chip-ID: 1002:15de
class-ID: 0403
Device-2: AMD Family 17h HD Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel bus-ID: 04:00.6 chip-ID: 1022:15e3
class-ID: 0403
Sound Server-1: ALSA v: k5.13.8-1-MANJARO running: yes
Sound Server-2: JACK v: 1.9.19 running: no
Sound Server-3: PulseAudio v: 15.0 running: yes
Sound Server-4: PipeWire v: 0.3.33 running: yes
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Hewlett-Packard driver: r8169 v: kernel modules: r8168 port: 3300
bus-ID: 01:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp1s0f0 state: down mac: <filter>
Device-2: Intel Wireless 8265 / 8275 driver: iwlwifi v: kernel port: 3000
bus-ID: 02:00.0 chip-ID: 8086:24fd class-ID: 0280
IF: wlp2s0 state: up mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global
broadcast: <filter>
IP v6: <filter> type: noprefixroute scope: link
IF-ID-1: docker0 state: down mac: <filter>
IP v4: <filter> scope: global broadcast: <filter>
WAN IP: <filter>
Bluetooth:
Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8
bus-ID: 4-1.1:4 chip-ID: 8087:0a2b class-ID: e001
Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: enabled,running
rfk-block: hardware: no software: yes address: see --recommends
Logical:
Message: No logical block device data found.
Device-1: luks-79735e42-7ad3-4840-ab29-b57a2566333c maj-min: 254:0
type: LUKS dm: dm-0 size: 931.21 GiB
Components:
p-1: nvme0n1p2 maj-min: 259:2 size: 931.22 GiB
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 931.51 GiB used: 97.7 GiB (10.5%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung
model: SSD 970 EVO Plus 1TB size: 931.51 GiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: 3B2QEXM7 temp: 38.9 C scheme: GPT
Message: No optical or floppy data found.
Partition:
ID-1: / raw-size: 931.21 GiB size: 915.52 GiB (98.32%)
used: 97.7 GiB (10.7%) fs: ext4 dev: /dev/dm-0 maj-min: 254:0
mapped: luks-79735e42-7ad3-4840-ab29-b57a2566333c label: N/A
uuid: e456d97d-a0b6-496d-8218-33fa1e3a30ba
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 440 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
label: NO_LABEL uuid: 6570-CB4E
Swap:
Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 512 MiB used: 0 KiB (0.0%) priority: -2
file: /swapfile
Unmounted:
Message: No unmounted partitions found.
USB:
Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Hub-3: 3-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Hub-4: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0
speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
Hub-5: 4-1:2 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s
power: 100mA chip-ID: 05e3:0608 class-ID: 0900
Device-1: 4-1.1:4 info: Intel Bluetooth wireless interface type: Bluetooth
driver: btusb interfaces: 2 rev: 2.0 speed: 12 Mb/s power: 100mA
chip-ID: 8087:0a2b class-ID: e001
Device-2: 4-1.3:5 info: Validity Sensors type: <vendor specific> driver: N/A
interfaces: 1 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 138a:00ab
class-ID: ff00 serial: <filter>
Device-3: 4-2:3 info: Chicony HP HD Camera type: Video driver: uvcvideo
interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 04f2:b5ee
class-ID: 0e02
Hub-6: 5-0:1 info: Full speed (or root) Hub ports: 1 rev: 3.1 speed: 10 Gb/s
chip-ID: 1d6b:0003 class-ID: 0900
Sensors:
System Temperatures: cpu: 52.8 C mobo: 30.0 C gpu: amdgpu temp: 52.0 C
Fan Speeds (RPM): N/A
Info:
Processes: 301 Uptime: 42m wakeups: 1 Init: systemd v: 248 tool: systemctl
Compilers: gcc: 11.1.0 clang: 12.0.1 Packages: 1441 pacman: 1421 lib: 337
flatpak: 6 snap: 14 Shell: Bash v: 5.1.8 running-in: tmux: inxi: 3.3.06
Starting the installer will just hang on a VM on machines with low resources.
There have been no new builds since November 1st. The automatic builds have been failing since then: https://github.com/manjaro-gnome/download/actions/workflows/iso_build.yaml
Could anyone fix it?
Thanks in advance.
There was no build today
It would be easier to log in without one as a user will not know the password is manjaro, besides there is no point for one in a live session.
It is non trivial for a new person to know which files to download from release page and
how to combine them. I had to search for few minutes before I got to correct
I used following command to combine different part and then extracted it normally.
zip -s- manjaro-gnome-next-20.2.1-unstable-minimal-210129-linux59.iso.zip manjaro-gnome-next-20.2.1-unstable-minimal-210129-linux59.iso.z01 -O output.zip
and there may be way to extract without combining first which would be nice.
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.