manahter / ncnc Goto Github PK

Extention does not showing my printer port in ports list, but if i look into /dev - i see it's port.

I am a developer for blendercam and would like to invite you to contribute to blendercam. It would be most interesting to integrate the grbl communication to blendercam.

If this is something you would like to do, join us on matrix blendercam channel.

I and a few other developers have made the greatest changes to blendercam in 2021 and hope 2022 will be as fruitful but we need help.

Issue

• If you click on the "Connection" button and never connected,
• The problem can be this;
  • Your username is not included in the "DialOut" group

Solution

• Run this code in the terminal (for Linux):
  sudo adduser $USER dialout
• And after this, reboot your computer

References

• /dev/ttyS0: Permission denied

Help me I use linux, I can't access /dev/ttyACM0. If I run Blender from the executable it works ok, if I run Blender from the flatpak it doesn't access. Do I have to give flatpak permission? permission to blender? or is it some local variable path i should create?
Congratulations on the masterpiece!!

Even after re-configuring the parameters to be the same as the ones I use in other software, the addon does not unlock for movement. As is expected to be done "homing" but does not obey any command.
Ps .: The machine works with other controllers normally.

I use 2.92 Blender on a linux.

Görüntüleme kısmının kodlarında problem var.
Buna zaman ayırdığımda düzelteceğim...

Problem in G Code vieving codes.
I will fix it when I take the time ...

G Code:
Untitled.nc

https://www.blender.org/
Did someone test it with 2.93.1 to confirm its can be added?

https://github.com/manahter/nCNC/wiki/Installation
Its did not tell anything about version of blender and did get error if i use install to user.

windows 10 com connection blender 2.92 steam edition

not listing com ports. com3 is active over usb

"using Grbl 1.1g ['$' for help]" Arduino software connects fine

Hi,
I'm so glad as I found your AddOn and I installed it at once.
I'm a blender use for many years an dhope you can help me.
I build my own CNC with Arduino Uno as Controller where GRBL 1.1 is installed.

I got access with other programms to the machine (CNCjs) but in Blender I can't establishe a connection. I also test it with Blender 2.8.3

Uzun süre işlem yapınca veri birikiyor ve program yavaşlıyor.
Buna zaman ayırdığımda düzelteceğim...

bonjour j'ai téléchargé votre bibliothèque
j'aimerais convertir en ngc et blender m'envoi le rapport d'erreur:
.
Pouvez vous m'aider