IR Rotatron MK2 wrong direction after time warp about infernalrobotics HOT 9 OPEN

from infernalrobotics.

Only with OPT 1.9.2 Parts.... please

Prototype.zip

from infernalrobotics.

Can you try replacing your current InfernalRobotics.dll with this one:
https://drive.google.com/open?id=0B9f5PHcywXQIQXJ0RHdaZWJQQWM

It is a minor change, but it solves couple issues. Also with this dll I could not reproduce your problem.

from infernalrobotics.

The problem still exists. But it is only present when the rotor is not in the zero position during the time warp. Have you tested it with my Craft-File?

from infernalrobotics.

I did, though not extensively. Will do more tests tomorrow.

from infernalrobotics.

I've found the problem is not the rotor, but the angle of the rotor base is changing. The IR Rotatron MK2 has an arrow or nose that change position abruptly.

from infernalrobotics.

Did you try the dll I posted, it should fix the rotating base issue with timewarp.

from infernalrobotics.

I replaced the DLL with yours. Problem still exists. I think that after the Timewarp the base to the last rotor position is set to zero. Thus, although the rotor is still the base at the adjusted angle, the base is rotated as if the rotor were in the zero position. If you want I can make you again a video in which you can see it exactly.

from infernalrobotics.

I tested again today. The problem is solved with the new DLL. No idea why the error was active again this week.

from infernalrobotics.