m0th3rch1p / openss7 Goto Github PK
View Code? Open in Web Editor NEWThis project forked from openss7/openss7
openss7 STREAMS and protocol stacks
Home Page: http://www.openss7.org/
License: GNU Affero General Public License v3.0
This project forked from openss7/openss7
openss7 STREAMS and protocol stacks
Home Page: http://www.openss7.org/
License: GNU Affero General Public License v3.0
OpenSS7 -- read me first file. 2020-03-03 $Id: README,v 1.1.2.25 2011-05-10 13:45:30 brian Exp $ Copyright (c) 2008-2020 Monavacon Limited. <http://www.monavacon.com/> Copyright (c) 2001-2008 OpenSS7 Corporation. <http://www.openss7.com/> Copyright (c) 1997-2001 Brian Bidulock <[email protected]> See the end for copying conditions (for this file). OpenSS7 ======= Package openss7-1.1.8.20200303 was released under AGPLv3 2020-03-03. This is the 'OpenSS7' package. It contains all of the OpenSS7 Project release code. This is the only package released by the OpenSS7 Project. The package contains all of the former subpackages of the OpenSS7 Master Package, including: * Linux Fast-STREAMS * STREAMS Compatibility Modules * STREAMS Utilities * STREAMS Terminals * STREAMS X/Open Networking Services * STREAMS X/Open Networking XTI/TLI Library * STREAMS Sockets * STREAMS Internet Protocol Drivers * STREAMS SCTP * STREAMS Channels and Multiplexing * STREAMS X.25 and Frame Relay Stack * STREAMS Open Systems Interconnect (OSI) Stack * STREAMS ISDN Stack * STREAMS ATM Stack * STREAMS SS7 Stack * STREAMS SIGTRAN Stack * STREAMS VoiP Stack Fully deprecated by this release and no longer released by the OpenSS7 Project are the following former subpackages of the OpenSS7 Master Package:(1) * Linux Native Sockets SCTP * Internet Performance (the OpenSS7 iperf fork) * Network Performance (the OpenSS7 netperf fork) * Dialogic Open System Release 6.1 This distribution is applicable to 'Linux' 2.4, 2.6, 3.x and 4.x kernels and was targeted at 'ix86', 'x86_64', 'ppc' and 'ppc64' architectures, but should build and install for other architectures as well. Release ------- This is the 'openss7-1.1.8.20200303' package, released 2020-03-03. This '1.1.8.20200303' release, and the latest version, can be obtained from the download area (http://www.openss7.org/download.html) of The OpenSS7 Project website using a command such as: $> wget http://www.openss7.org/tarballs/openss7-1.1.8.20200303.tar.xz The release is available as an 'autoconf(1)' tarball, 'src.rpm' or 'dsc', as a set of binary 'rpm's or 'deb's, or as a 'yum(8)', 'zypper(8)' or 'apt(8)' repository. See the download page (http://www.openss7.org/download.html) for the 'autoconf(1)' tarballs, 'src.rpm's, 'dsc's, or repository access instructions. See the 'openss7' package page (http://www.openss7.org/openss7_pkg.html) for tarballs, source and binary packages. Please see the 'NEWS' file for release notes and history of user visible changes for the current version, and the 'ChangeLog' file for a more detailed history of implementation changes. The 'TODO' file lists features not yet implemented and other outstanding items. Please see the 'INSTALL', 'INSTALL-openss7' and 'README-make', files (or *note Installation::) for installation instructions. When working from 'cvs(1)' or 'git(1)', please see the 'README-cvs', file (or *note Downloading from CVS::). An abbreviated installation procedure that works for most applications appears below. This release of the package is published strictly under Version 3 of the 'Affero GNU Public License' which can be found in the file 'COPYING'. Package specific licensing terms (if any) can be found in the file 'LICENSES'. Please respect these licensing arrangements. If you are interested in different licensing terms, please contact the copyright holder, or OpenSS7 Corporation <[email protected]>. See 'README-alpha' (if it exists) for alpha release information. Repository Installation ----------------------- The simplest way of installing the package is to use the 'OpenSS7' 'repomd' or 'apt' repositories instead of attempting to build from tarball. When you already have a the repository set up, the package can be udpated simply with (one of): Fedora: $> sudo yum update openss7 CentOS: $> sudo yum update openss7 RHEL: $> sudo yum update openss7 OpenSUSE: $> sudo zypper update openss7 SLES: $> sudo zypper update openss7 Mageia: $> sudo uprmi openss7 Mandriva: $> sudo urpmi openss7 MES: $> sudo urpmi openss7 Ubuntu: $> sudo aptitude install openss7 Debian: $> sudo aptitude install openss7 If you have not yet set up an installation source for the 'OpenSS7' repositories, one of the following commands will establish repository access for RPM-based systems: $> REPO=http://www.openss7.org/repo/rpms Fedora: $> SUBDIR=fedora/15/$(uname -m)/RPMS/noarch CentOS: $> SUBDIR=centos/5.6/$(uname -m)/RPMS/noarch RHEL: $> SUBDIR=redhat/6.0/$(uname -m)/RPMS/noarch OpenSUSE: $> SUBDIR=opensuse/11.4/$(uname -m)/RPMS/noarch SUSE: $> SUBDIR=suse/11.1/$(uname -m)/RPMS/noarch Mageia: $> SUBDIR=mageia/1/$(uname -m)/RPMS/noarch Mandriva: $> SUBDIR=mandriva/2011.0/$(uname -m)/RPMS-noarch MES: $> SUBDIR=mes/5.2/$(uname -m)/RPMS/noarch $> sudo rpm -Uhv $REPO/$SUBDIR/openss7-repo.noarch.rpm For DPKG-based systems, one of the following command sequences will establish repository access for DPKG-based systems: $> REPO=http://www.openss7.org/repo/debs/ Debian: $> SUBDIR=debian/squeeze/$(dpkg-architecture -a -qDEB_HOST_ARCH)/main Ubuntu: $> SUBDIR=ubuntu/10.04/$(dpkg-architecture -a -qDEB_HOST_ARCH)/main $> wget $REPO/$SUBDIR/openss7-repo_all.deb $> dpkg -i -D010077 openss7-repo_all.deb For 'zypper(8)' based systems it may be first necessary to perform: OpenSUSE: $> sudo rpm --import https://www.openss7.org/pubkey.asc SLES: $> sudo rpm --import https://www.openss7.org/pubkey.asc For 'apt(8)' based systems it may be first necessary to perform: $> wget https://www.openss7.org/pubkey.asc Debian: $> sudo apt-key add pubkey.asc Ubuntu: $> sudo apt-key add pubkey.asc For 'yum(8)' based systems, caches should be refreshed with: Fedora: $> sudo yum makecache CentOS: $> sudo yum makecache RHEL: $> sudo yum makecache For 'zypper(8)' based systems, caches should be refreshed with: OpenSUSE: $> sudo zypper refresh-services OpenSUSE: $> sudo zypper refresh SLES: $> sudo zypper refresh-services SLES: $> sudo zypper refresh For 'urpmi(8)' based systems, caches should be refreshed with: Mageia: $> sudo urpmi.update Mandriva: $> sudo urpmi.update MES: $> sudo urpmi.update For 'apt(8)' base systems, caches should be refreshed with:(2) Debian: $> sudo aptitude update Ubuntu: $> sudo aptitude update Once the repository is set up in this fashion, it should be possible to install using (one of): Fedora: $> sudo yum install openss7 CentOS: $> sudo yum install openss7 RHEL: $> sudo yum install openss7 OpenSUSE: $> sudo zypper install openss7 SLES: $> sudo zypper install openss7 Mageia: $> sudo uprmi openss7 Mandriva: $> sudo urpmi openss7 MES: $> sudo urpmi openss7 Debian: $> aptitude install openss7 Ubuntu: $> aptitude install openss7 The entire process can be undone with: Fedora: $> sudo yum remove openss7 openss7-repo CentOS: $> sudo yum remove openss7 openss7-repo RHEL: $> sudo yum remove openss7 openss7-repo OpenSUSE: $> sudo zypper remove openss7 openss7-repo SLES: $> sudo zypper remove openss7 openss7-repo Mageia: $> sudo uprme openss7 Mandriva: $> sudo urpme openss7 MES: $> sudo urpme openss7 Debian: $> sudo aptitude remove openss7 openss7-repo Ubuntu: $> sudo aptitude remove openss7 openss7-repo Build Prerequisites ------------------- When building from source RPM or DSC, the prerequisites for building must be met. Most RPM or DEB build prerequisites are automatic; however, some prerequisites must still be met manually. When building from tarball, most prerequisites must be met manually. The 'configure' script will inform you of most missing prerequisites and the actions that must be performed to meet those prerequisites. Prerequisites for building OpenSS7 package are as follows: 1. 'Linux' distribution, somewhat 'Linux Standards Base' compliant, with a 2.4, 2.6 or 3.x kernel and the appropriate tool chain for compiling out-of-tree kernel modules. Most recent 'Linux' distributions are usable out of the box, but some development packages must be installed. For more information, see *note Compatibility::. - A fairly LSB compliant GNU/Linux distribution.(3) - Linux 2.4 kernel (2.4.10 - 2.4.27), - Linux 2.6 kernel (2.6.3 - 2.6.39), or - Linux 3.x kernel (3.0 - 3.16); - Linux 4.x kernel (4.0 - 4.10); - glibc2 or better. - GNU groff (for man pages).(4) - GNU texinfo (for info files). - GNU bison and flex (for config programs). - net-snmp (for SNMP agents).(5) - GNU gcj and classpath (for Java modules). - swig (for Java, Tcl, Perl and Ruby interfaces). The following will meet most additional prerequisites for a CentOS/RHEL 5.5 build host: #> yum install bzip2 chkconfig coreutils createrepo doxygen \ gcc-java ghostscript gjdoc glibc gnupg gnuplot \ groff gzip ImageMagick kernel-devel latex2html \ libgcj lsof module-init-tools rpm rpm-build tetex \ tetex-dvips tetex-latex transfig xz xz-lzma-compat \ zip The following will meet most additional prerequisites for a CentOS/RHEL 6.0 build host: #> yum install bzip2 chkconfig coreutils createrepo doxygen \ gcc-java ghostscript glibc gnuplot groff gzip ImageMagick \ java-1.6.0-openjdk-devel java-1.6.0-openjdk-javadoc \ kabi-whitelists kernel kernel-devel latex2html libgcj \ libgcj-devel lsof module-init-tools net-snmp-devel \ perl-devel rpm rpm-build tcl-devel texlive texlive-dvips \ texlive-latex texlive-utils transfig xz zip The following will meet most additional prerequisites for a CentOS/RHEL 7.5 build host: #> yum install \ autoconf texlive-bibtex-bin bzip2 chkconfig ImageMagick \ createrepo doxygen texlive-dvips-bin ghostscript \ texlive-epstopdf perl-devel transfig gnuplot groff-base \ gzip initscripts kernel-abi-whitelists kernel-devel \ latex2html glibc lsof man-db coreutils openssl rpm \ rpm-build swig kernel systemd tcl-devel net-snmp-devel \ xz ca-certificates filesystem kmod The following will meet most additional prerequisites for a SuSE Linux Enterprise 11 build host: #> zypper install aaa_base bzip2 coreutils createrepo doxygen \ fastjar gcc43-gij gcc-java ghostscript-library gjdoc \ glibc gnuplot gpg2 groff gzip ImageMagick inst-source-utils \ kernel-default-devel latex2html lsof module-init-tools \ rpm texlive texlive-latex transfig zip The following will meet most additional prerequisites for a Debian 6.0 build host: #> apt-get install apt-utils bzip2 coreutils createrepo doxygen \ dpkg dpkg-dev fastjar gcj-jdk gcj-jre-headless ghostscript \ gnupg gnuplot-nox gnuplot-x11 groff groff-base gzip \ imagemagick insserv latex2html libc-bin lsof lzma \ module-init-tools rpm texlive-binaries texlive-font-utils \ texlive-latex-base transfig xz-utils zip The package builds and installs kernel modules. When configuring and building the package, it is necessary to have the kernel development package installed. For the following distributions, use the following commands: Ubuntu: $> apt-get install linux-headers Debian: $> apt-get install kernel-headers Fedora: $> yum install kernel-devel CentOS: $> yum install kernel-devel You also need the same version of 'gcc(1)' compiler with which the kernel was built. If it is not the default, add 'CC=kgcc' on the line after './configure', for example: $> ../openss7-1.1.8.20200303/configure CC='gcc-3.4' The package builds and installs SNMP agents. When configuring and building the package, it is necessary to have the net-snmp development packages installed. For the following distributions, use the following commands: Ubuntu: $> apt-get install libsnmp libsnmp-perl snmp snmpd \ lm-sensors libsnmp-dev libsnmp9-dev libsensors-dev Debian: $> apt-get install libsnmp libsnmp-perl snmp snmpd \ lm-sensors libsnmp-dev libsnmp9-dev libsensors-dev Fedora: $> yum install net-snmp net-snmp-perl net-snmp-utils \ lm_sensors net-snmp-devel lm_sensors-devel CentOS: $> yum install net-snmp net-snmp-perl net-snmp-utils \ lm_sensors net-snmp-devel lm_sensors-devel The package builds and installs Java archives and compiled Java. When configuring and building the package, it is necessary to have the GNU GCJ Java Compiler front-end and GNU Classpath archives installed. For the following distributions, use the following commands: Ubuntu: $> apt-get install gcj Debian: $> apt-get install gcj Fedora: $> yum install gcc-java CendOS: $> yum install gcc-java Installation ------------ The following commands will download, configure, build, check, install, validate, uninstall and remove the package: $> wget http://www.openss7.org/tarballs/openss7-1.1.8.20200303.tar.xz $> tar -xJvf openss7-1.1.8.20200303.tar.xz $> mkdir build $> pushd build $> ../openss7-1.1.8.20200303/configure --enable-autotest --enable-silent-rules $> make V=0 $> make check $> sudo make install $> sudo make installcheck $> sudo make uninstall $> popd $> sudo rm -rf build $> rm -rf openss7-1.1.8.20200303 $> rm -f openss7-1.1.8.20200303.tar.xz If you have problems, try building with the logging targets instead. If the make of a logging target fails, an automatic problem report will be generated that can be mailed to The OpenSS7 Project <[email protected]>.(6) Installation steps using the logging targets proceed as follows: $> wget http://www.openss7.org/tarballs/openss7-1.1.8.20200303.tar.xz $> tar -xJvf openss7-1.1.8.20200303.tar.xz $> mkdir build $> pushd build $> ../openss7-1.1.8.20200303/configure --enable-autotest --enable-silent-rules $> make V=1 compile.log $> make check.log $> sudo make install.log $> sudo make installcheck.log $> sudo make uninstall.log $> popd $> sudo rm -rf build $> rm -rf openss7-1.1.8.20200303 $> rm -f openss7-1.1.8.20200303.tar.xz See 'README-make' for additional specialized make targets. For custom applications, see the 'INSTALL' and 'INSTALL-openss7' files or the see *note Installation::, as listed below. If you encounter troubles, see *note Troubleshooting::, before issuing a bug report. Brief Installation Instructions ------------------------------- The OpenSS7 package is available from the downloads area of The OpenSS7 Project website (http://www.openss7.org/download.html) using a command such as: $> wget http://www.openss7.org/tarballs/openss7-1.1.8.20200303.tar.xz Unpack the tarball using a command such as: $> tar -xJvf openss7-1.1.8.20200303.tar.xz The tarball will unpack into the relative subdirectory named after the package name: openss7-1.1.8.20200303. The package builds using the GNU 'autoconf' utilities and the 'configure' script. To build the package, we recommend using a separate 'build' directory as follows: $> mkdir build $> cd build $> ../openss7-1.1.8.20200303/configure In general, the package configures and builds without adding any special options to the 'configure' script. For general options to the 'configure' script, see the GNU 'INSTALL' file in the distribution: $> less ../openss7-1.1.8.20200303/INSTALL For specific options to the 'configure' script, see the 'INSTALL-openss7' file in the distribution, or simply execute the configure script with the '--help' option like so: $> ../openss7-1.1.8.20200303/configure --help After configuring the package, the package can be compiled simply by issuing the 'make' command: $> make V=0 Some specialized makefile targets exists, see the 'README-make' file in the distribution or simply invoke the 'help' target like so: $> make help | less After successfully building the package, the package can be checked by invoking the 'check' make target like so: $> make check After successfully checking the package, the package can be installed by invoking the 'install' make target (as root) like so: $> sudo make install The 'info' documentation is automatically installed; however, the text, html and pdf documentation must be installed separately like so: $> sudo make install-txt $> sudo make install-html $> sudo make install-pdf The test suites that ship with the package can be invoked after the package has been installed by invoking the 'installcheck' target. This target can either be invoked as root, or as a normal user, like so: $> make installcheck (Note: you must add the '--enable-autotest' flag to 'configure', above for the test suites to be invoked with 'make installcheck'.) The package can be cleanly removed (including installed documentation) by invoking the 'uninstall' target (as root): $> sudo make uninstall Then the build directory and tarball can be simply removed: $> cd .. $> rm -rf build $> rm -rf openss7-1.1.8.20200303 $> rm -f openss7-1.1.8.20200303.tar.xz Detailed Installation Instructions ---------------------------------- More detailed installation instructions can be found in the *note Installation::, contained in the distribution in 'text', 'info', 'html' and 'pdf' formats: $> cd ../openss7-1.1.8.20200303 $> less doc/manual/openss7.txt $> lynx doc/manual/openss7.html $> info doc/manual/openss7.info $> xpdf doc/manual/openss7.pdf The 'text' version of the manual is always available in the 'MANUAL' file in the release. The current manual is also always available online from 'The OpenSS7 Project' website at: $> lynx http://www.openss7.org/openss7_manual.html ---------- Footnotes ---------- (1) With the exception of Linux Native Sockets SCTP, these packages can be obtained from the projects or companies that originated them. (2) Note that the apt-transport-https package must be installed for the openss7 repositories to function correctly. Try 'sudo aptitude install apt-transport-https'. (3) See *note GNU/Linux Distributions::, for more information. (4) If you are using a Debian release, please make sure to install the groff extension package ('groff_ext'), as it contains the 'refer' or 'grefer' commands necessary for including references in the manual pages. (5) A wide range of net-snmp releases are supported, from UCD-SNMP 4.2.5 through net-snmp 5.8. (6) Please see *note Problem Reports::, or the file 'PROBLEMS' in the release directory for more information on filing a proper "Problem Report". ----- ========================================================================= Copyright (c) 2008-2011 Monavacon Limited <http://www.monavacon.com/> Copyright (c) 2001-2008 OpenSS7 Corporation <http://www.openss7.com/> Copyright (c) 1997-2001 Brian Bidulock <[email protected]> All Rights Reserved. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one Since the Linux kernel and libraries are constantly changing, this manual page may be incorrect or out-of-date. The author(s) assume no responsibility for errors or omissions, or for damages resulting from the use of the information contained herein. The author(s) may not have taken the same level of care in the production of this manual, which is licensed free of charge, as they might when working professionally. Formatted or processed versions of this manual, if unaccompanied by the source, must acknowledge the copyright and authors of this work. ------------------------------------------------------------------------- U.S. GOVERNMENT RESTRICTED RIGHTS. If you are licensing this Software on behalf of the U.S. Government ("Government"), the following provisions apply to you. If the Software is supplied by the Department of Defense ("DoD"), it is classified as "Commercial Computer Software" under paragraph 252.227-7014 of the DoD Supplement to the Federal Acquisition Regulations ("DFARS") (or any successor regulations) and the Government is acquiring only the license rights granted herein (the license rights customarily provided to non-Government users). If the Software is supplied to any unit or agency of the Government other than DoD, it is classified as "Restricted Computer Software" and the Government's rights in the Software are defined in paragraph 52.227-19 of the Federal Acquisition Regulations ("FAR") (or any successor regulations) or, in the cases of NASA, in paragraph 18.52.227-86 of the NASA Supplement to the FAR (or any successor regulations). ========================================================================= Commercial licensing and support of this software is available from OpenSS7 Corporation at a fee. See http://www.openss7.com/ ========================================================================= vim: ft=README tw=72 nocindent nosmartindent formatoptions+=tcqlorn
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.