Read the articles...
This repo depends on...
To add this repo to your NuttX project...
cd nuttx/apps/examples
git submodule add https://github.com/lupyuen/tinycbor_test
Then update the NuttX Build Config...
## TODO: Change this to the path of our "incubator-nuttx" folder
cd nuttx/nuttx
## Preserve the Build Config
cp .config ../config
## Erase the Build Config
make distclean
## For BL602: Configure the build for BL602
./tools/configure.sh bl602evb:nsh
## For ESP32: Configure the build for ESP32.
## TODO: Change "esp32-devkitc" to our ESP32 board.
./tools/configure.sh esp32-devkitc:nsh
## Restore the Build Config
cp ../config .config
## Edit the Build Config
make menuconfig
In menuconfig, enable the TinyCBOR Test App under "Application Configuration" โ "Examples".
In NuttX Shell, enter this to run the app...
tinycbor_test
nsh> tinycbor_test
test_cbor: Encoding { "t": 1234 }
CBOR Output: 6 bytes
0xa1
0x61
0x74
0x19
0x04
0xd2
test_cbor2: Encoding { "t": 1234, "l": 2345 }
CBOR Output: 11 bytes
0xa2
0x61
0x74
0x19
0x04
0xd2
0x61
0x6c
0x19
0x09
0x29