A shell script to make backups using cron. The script make it possible to
- specify a backup scheduled interval
- define source of backups
- define destination of backups
- define number of copies to retain
For a description of the backup commands, please go to the Basic commands section.
This backup application is used in my docker containers to make backups of vital information, for installing the application yourself please goto the Installation section in this description. The backup is included in the following docker containers
For the schedule (cron) in backup to work the container must be started as a daemon and no new start command used. Otherwise you are responsible to start the cron daemon.
In a comming release there will be instruction who do do a multihost replication of the backup data, stay tuned
There is no need to open a shell to the container to do backup configuration, this can be done with the docker exec, starting an apache container and then enable backup for the /web/html as the application writes data inside this directory.
Begin by creating the container
~$ docker run -d --name web -P nimmis/alpine-apache
executing the backup command without parameters gives list of avaliable commands
~$ docker exec web backup
creating backupdirectory /backup/2866fd20493d/backup
/usr/local/bin/backup <command> [<parameters>]
command to controll backup of database in container
Command Information
status gives the status of backup (active/ disabled/number of backups/disk size)
disable disable backup
enable enable backup
destination <dir> set backup-file destination (default / backup/<hostname>/<cmdname>)
retain <num> set number of backup to retain
schedule <inter> set sceduled intervall between backups (hour/day/week/month)
show show currently saved backups
backup run backup now
help Show this information
list list current directories
add <src> add directory to backup
remove <src> remove directory from backup
First setup which directories to do backup of, repeat for each directory
~$ docker exec web backup add /web/html
Check which directories is listed for backup
~$ docker exec web backup list
backup of /web/html, estimated size 8.0KB
Set up a backup plan, daily and retain for 30 days
~$ docker exec web backup schedule 1d
~$ docker exec web backup retain 30
Check the setting so that they are correct
~$ docker exec web backup status
Backup is disabled
Active backups 0 of maximum 30
Backup interval 1d (cron 0 0 */1 * *)
Latest backup file
Total size of backups 4.0KB
Backup destination directory is /backup/2866fd20493d/backup
Default destination is /backup//, you can change this with
~$ docker exec web backup destination /new/directory/path
but the naming is used for the possibility to share a commong volume for all container backups, making uniq directories for earch container.
Last command to do is to activate the defined backup schema
~$ docker exec web backup enable
It is possible to add manual backups to the backup, please remember that they are counted in the number of copies to retain
~$ docker exec web backup backup
backup of /web/html, size 8.0KB compressed 4.0KB
You can always check the current status with (i have used 1m interval just to create more files)
~$ docker exec web backup status
Backup is active
Active backups 11 of maximum 30
Backup interval 1d (cron 0 0 */1 * *)
Latest backup file backup-2016_08_11_10_25.tar
Total size of backups 48.0KB
Backup destination directory is /backup/2866fd20493d/backup
and list current backups available
~$ docker exec web backup show
list of backups
-rw-r--r-- 1 3072 Aug 11 10:15 backup-2016_08_11_10_15.tar
-rw-r--r-- 1 3072 Aug 11 10:16 backup-2016_08_11_10_16.tar
-rw-r--r-- 1 3072 Aug 11 10:17 backup-2016_08_11_10_17.tar
-rw-r--r-- 1 3072 Aug 11 10:18 backup-2016_08_11_10_18.tar
-rw-r--r-- 1 3072 Aug 11 10:19 backup-2016_08_11_10_19.tar
-rw-r--r-- 1 3072 Aug 11 10:20 backup-2016_08_11_10_20.tar
-rw-r--r-- 1 3072 Aug 11 10:21 backup-2016_08_11_10_21.tar
-rw-r--r-- 1 3072 Aug 11 10:22 backup-2016_08_11_10_22.tar
-rw-r--r-- 1 3072 Aug 11 10:23 backup-2016_08_11_10_23.tar
-rw-r--r-- 1 3072 Aug 11 10:24 backup-2016_08_11_10_24.tar
-rw-r--r-- 1 3072 Aug 11 10:25 backup-2016_08_11_10_25.tar
To pause the backup do
~$ docker exec web backup disable
The following modues are included (besides the base module)
Download the scripts from the github repository either as zip or tar
Download and unpack it in /tmp,
for zip
wget https://github.com/nimmis/backup/archive/master.zip
unzip master.zip
rm master.zip
cd backup-master
and for tar
wget https://github.com/nimmis/backup/archive/master.tar.gz
tar xfz master.tar.gz
rm master.tag.gz
cd backup-master
of alternative for tar
curl --sL https://github.com/nimmis/backup/archive/master.tar.gz | tar xfz -
cd backup-master
To install the scripts an installation script is used, run
./install.sh
command to install backup program and addons
Command Information
help show this information
all Install backup and all addons
list List all addons available
backup Basic installation of backup scripts
<addon> Install <addon> addon to backup
The command backup is the basecommand for backing up directories, then additional modules are added to do backups on other types of data, databases etc. Using ./install.sh list gives a list of all currently avaliable modules
./install.sh list
Module Info
backup base module (installs always)
backup_mysql backup module for mysql/mariadb
backup_skel Skeleton layout for new backup module
Using the command ./install.sh all, all modules are installed. This command needs permission to create and write files in /etc/ and /usr/local so it has to be run as root
sudo ./install.sh all
Installing backup
Installing backup_mysql
Installing backup_skel
The command lists all modules it installes
If only one of the modules is needed, using ./install only installs that module. All backup modules need the base modules backup so it is automaticly installed
Installing the mysql bakup modules
sudo ./install.sh backup_mysql
Installing backup
Installing backup_mysql
The install files are not needed any more so they can be removed
cd ..
rm -Rf backup-master
Each backupcommand as a configuration file in the directory /usr/local/etc/backup/ with the syntax < backup command name >.conf
>backup status
Active backups 10 of maximum 10
Backup interval 1m (cron */1 * * * *)
Latest backup file backup-2016_07_29_20_24.tar
Total size of backups 2.2MB
Backup destination directory is /backup/57375490a540
>backup enable
enable activate the cronjob to do backups with the interval defined by set-interval
>backup disable
deisable the cronjob to do backups, no backupfile is removed by this command
>backup destination /backup/server1
destination defines where the backups should be stored, if the directory does not exist it will be created.
Default the backup directory will be set to the following directory path
/backup/<server host name>/<name of backup command>
So for the standard backup command backup on a machine with the follow hostname
>hostname
2932bf7bc114
will do backups to directory
/backup/2932bf7bc114/backup
The use of hostname makes it possible to use a shared volume to backup multiple hosts without overwriting other host backups
>backup retain 5
Defines how many backups to retain, when the defined number is reached the oldest will be removed.
Default setting i 5
>backup schedule 1d
This command defined the scheduled interval between the backups. The interval is defined as where units are
| unit name | description |
|---|---|
| m | m interval i minutes |
| h | h interval i hours |
| d | d interval i days |
| M | M interval i months |
>backup show
list of backups
-rw-r--r-- 1 214016 Jul 29 20:19 backup-2016_07_29_20_19.tar
-rw-r--r-- 1 214016 Jul 29 20:20 backup-2016_07_29_20_20.tar
-rw-r--r-- 1 214016 Jul 29 20:21 backup-2016_07_29_20_21.tar
-rw-r--r-- 1 214016 Jul 29 20:22 backup-2016_07_29_20_22.tar
-rw-r--r-- 1 214016 Jul 29 20:23 backup-2016_07_29_20_23.tar
-rw-r--r-- 1 214016 Jul 29 20:24 backup-2016_07_29_20_24.tar
-rw-r--r-- 1 214016 Jul 29 20:25 backup-2016_07_29_20_25.tar
-rw-r--r-- 1 214016 Jul 29 20:26 backup-2016_07_29_20_26.tar
-rw-r--r-- 1 214016 Jul 29 20:27 backup-2016_07_29_20_27.tar
-rw-r--r-- 1 214016 Jul 29 20:28 backup-2016_07_29_20_28.tar
Shows the current backups stored at the backupdirectory
>backup backup
backup of /etc, size 1.3MB compressed 192.0KB
backup of /lib, size 3.3MB compressed 1.6MB
Execute a manual backup of the selected items (directories, databases etc)
Show one line for each backuped item with uncompressed/compressed size
Lista all directories configured for backup
backup add /etc
backup add /lib
backup list
backup of /etc, estimated size 1.3MB
backup of /lib, estimated size 3.3MB
The list show the estimated uncompessed size of the backup
Removes one directory from the list, previous backups are not affected.
backup remove /lib
removning source /lib
backup remove /notinlist
directory not in source list
Add a directory to the list of directories to be backuped
backup add /lib
backup add /notadirectory
source not a directory
Check if mysql server and selected databases are accessable
This command should always be run before active backup to check that all i OK
backup_mysql check
Accessing mysql server : FAIL
This response is either because the database server is not running or the user/password selected are incorrect.
backup_mysql check
Accessing mysql server : OK
Means that the user/password is correct and the databaseserver can be accessed
If databases are specified, a check to see that they are selectable is done also
backup_mysql check
Accessing mysql server : OK
Check database information_schema : OK
Check database mysql : OK
Check database performance_schema : OK
This command shows all found databases on the database-server
backup_mysql list-db
databases available for backup
information_schema
mysql
performance_schema
This command shows all databases scheduled for backup
backup_mysql list
mysql
Output shows that the database mysql is scheduled for backup
This command defined which username should be used to connect to the database.
Default value for user name is root
After changing user name and/or password check that it is correct with the command
backup_mysql check
This command defined which password should be used to connect to the database
Default value is a blank password
To set a black password again use the command
backup_mysql password -
After changing user name and/or password check that it is correct with the command
backup_mysql check
This command adds the selected daatabase to the backup schema
This command removes the selected database from the backup schema
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent