lobocobra / sonoff-shutter Goto Github PK

I have Sonoff 4CH Pro R2
1- Does your firmware work with Sonoff 4CH Pro R2?
2-Which of these patterns can you use with your firmware?
3- Do you have the firmware in the bin format?

Hi @lobocobra,
So I compiled and uploaded your fork by OTA on a Dual R2, after altering Platformio.ini and user_config.h to suit my needs.
No issue, I have access to the webserver and the main screen shows 6.1.1i as intended. But I lost the config and it defaults now to a Sonoff Basic.
Once configured in Dual R2 with :

• GPIO0=switch 1
• GPIO1=DS18B20
• GPIO3=none
• GPIO9=switch 2
  I made some UP/DN test with the shutter and it seems less reactive than Tasmota, but I have to follow up with the settings... latter.

(to be cont'd...)

Edit:
Regarding responsiveness, it's normal as my MQTT broker is down and the sonoff keep polling as I still didn't disable the dialog.

Lobocobra, thanks a lot for your excellent mod of the tasmota firmware. It is exactly what I was looking for.

However, what I would like to have is that on button press, the shutters only move, while the buttons are held down. It somewhat works when pressed for a longer time. However, a single short press on the buttons always drives the shutter the full way.

I reduced the pulsetime to some small value, however, it always seems to be reset to a higher value (seems to be ShutterMaxDSec + 5). Is it possible maintain a custom pulsetime?

Thanks for your support.

PS: I am running the firmware on a 4CH Pro.

PPS: I just read through #1 and understand the logic behind it. However, I would still be interested whether there is a solution or work-around.

Dear all,
First, thanks a lot for doing this custom firmaware. I think this should be a standard feature of the Tasmota firmware by the way, I am surprised that it is not done yet.

I've built the standard Tasmota 6.3 in my environment (ubuntu running PlatformIO) without any issues, but when I try to build this branch I get a:

Environment sonoff [ERROR]

I am 100% new to Tasmota, I've done some arduino coding but far more basic than this. To be honest I am just compiling because there is not a binary release of the project, otherwise I would use that instead.

Any idea why it could be firing the error?

Alfonso.

Make sure these boxes are checked [x] before submitting your issue - Thank you!

• [ x] Searched the problem in issues (https://github.com/arendst/Sonoff-Tasmota/issues)
• Searched the problem in the wiki (https://github.com/arendst/Sonoff-Tasmota/wiki/Troubleshooting)
• [ x] Searched the problem in the forum (https://groups.google.com/d/forum/sonoffusers)
• [x ] Searched the problem in the chat (https://discord.gg/Ks2Kzd4)
• [x ] Hardware used :
• Provide the output of command status 0 :

STATUS 0 OUTPUT HERE

(Please, remember to close the issue when the problem has been addressed)

Enable code to run it on a DUAL SONOFF.