Package lorawan provides structures and tools to read and write LoraWAN messages from and to a slice of bytes.

The following structures are implemented (+ fields):

* PHYPayload    (MHDR | MACPayload | MIC)
* MACPayload    (FHDR | FPort | FRMPayload)
* FHDR          (DevAddr | FCtrl | FCnt | FOpts)

The Following message types (MType) are implemented:

* JoinRequest
* JoinAccept
* UnconfirmedDataUp
* UnconfirmedDataDown
* ConfirmedDataUp
* ConfirmedDataDown
* Proprietary (todo: add pluggable function for MIC calculation / validation)

The following MAC commands (and their optional payloads) are implemented:

* LinkCheckReq
* LinkCheckAns
* LinkADRReq
* LinkADRAns
* DutyCycleReq
* DutyCycleAns
* RXParamSetupReq
* RXParamSetupAns
* DevStatusReq
* DevStatusAns
* NewChannelReq
* NewChannelAns
* RXTimingSetupReq
* RXTimingSetupAns
* Proprietary commands (0x80 - 0xFF) can be registered with RegisterProprietaryMACCommand

Support for calculating and setting the MIC is done by calling SetMIC():

err := phyPayload.SetMIC(key)

Validating the MIC is done by calling ValidateMIC():

valid, err := phyPayload.ValidateMIC(key)

Encryption and decryption of the MACPayload (for join-accept) is done by calling EncryptJoinAcceptPayload() and DecryptJoinAcceptPayload(). Note that you need to call SetMIC BEFORE encryption.

err := phyPayload.EncryptJoinAcceptPayload(key)
err := phyPayload.DecryptJoinAcceptPayload(key)

Encryption and decryption of the FRMPayload is done by calling EncryptFRMPayload() and DecryptFRMPayload(). After encryption (and thus before decryption), the bytes are stored in the DataPayload struct.

err := phyPayload.EncryptFRMPayload(key)
err := phyPayload.DecryptFRMPayload(key)

All payloads implement the Payload interface. Based on the MIC value, you should be able to know to which type to cast the Payload value, so you will be able to access its fields.

See the examples section of the documentation for more usage examples of this package.

When using this package, knowledge about the LoRaWAN specification is needed. You can request the LoRaWAN specification here: https://www.lora-alliance.org/For-Developers/LoRaWANDevelopers

The LoRaWAN specification defines various region specific defaults and configuration. These can be found in the band sub-package.

See https://godoc.org/github.com/brocaar/lorawan. There is also an examples section with usage examples.

For questions, feedback or support, please refer to the LoRa Server project forum: https://forum.loraserver.io.

This package is distributed under the MIT license which can be found in LICENSE. LoRaWAN is a trademark of the LoRa Alliance Inc. (https://www.lora-alliance.org/).