Join the community on https://community.rpisurv.net.
Follow us on facebook https://www.facebook.com/rpisurv.
Have a chat on https://gitter.im/rpisurv/general.
If you like this software please consider donating:
See RELEASE_NOTES
Rpisurv is designed to be simple to use (no need to fiddle with coordinates or detailed layout configs) and to be able to run unattended for long periods of time. Therefore watchdogs and autohealing logic have been implemented. Version 2 adds functionality to define multiple screens which can be cycled between.
You can think of rpisurv as a wrapper for omxplayer with following features (Rpisurv uses omxplayer to fully make use of the GPU of the raspberry pi).
- Rpisurv implements a watchdog for every stream displayed, if the process gets killed somehow. It will try to restart the stream/process. This gives you a very robust surveillance screen.
- Autocalculcate coordinates for every stream displayed. The last stream defined will be stretched to make use of the complete screen but only if some pixels are unused (if autostretch option is True).
- Stream up/down detection and autorearrange of the screen layout (if disable_probing_for_all_streams is False). So for example if you stop a camera (or just stop the server on the camera), rpisurv will detect this and will recalculate/redraw the screen with the still available cameras. The same is true if a previous unconnectable rtsp stream becomes connectable. All without any user interaction.
- All this behaviour is available per screen, but as of version 2 you can configure multiple screens and cycle between them in an automated way or via the keyboard.
In short: The idea is to connect your raspberry pi to a monitor and tell rpisurv which stream(s) and screen(s) it should display or cycle between. Rpisurv will autocalculate all the rest.
- Get a monitor or a TV
- Get a raspberry pi dedicated for rpisurv, and install raspbian on it. Make sure your monitor is operating at the correct resolution
- If you are going to have multiple streams, add gpu_mem=512 to your /boot/config.txt
- git clone this repository:
git clone https://github.com/SvenVD/rpisurv
- move into folder
cd rpisurv
- OPTIONAL: checkout a specific branch, for example
git checkout v2_latest
, if you want to override the default version on master - run
sudo ./install.sh
- Get the correct stream url for your ip camera(s), there are some examples in /etc/rpisurv.conf
- configure your screen(s) and stream(s) in /etc/rpisurv.conf.
- OPTIONAL: configure optional options per screen or per camera stream in /etc/rpisurv.conf, the example config file file explains them all
- reboot
cd rpisurv; git pull
- OPTIONAL: checkout a specific branch, for example
git checkout v2_latest
, if you want to override the default version on master - run
sudo ./install.sh
(The installer will ask if you want to preserve your current config file) systemctl restart rpisurv
After installation you may change the placeholder images to something you like.
- /usr/local/bin/rpisurv/images/connecting.png is shown when a camera stream is starting up
- /usr/local/bin/rpisurv/images/placeholder.png is shown on empty squares
- /usr/local/bin/rpisurv/images/noconnectable.png is shown full screen when no connectable streams are detected for the current active screen in case multiple are cycled between
systemctl restart rpisurv
If you used the install.sh script, you can configure your streams in /etc/rpisurv.conf. Do not forget to reboot afterwards.
If you are connected via keyboard/keypad, you can force the next screen by pressing and holding n or space (or keypad "+") for some seconds in case multiple screens were defined (this takes longer depending on amount of unconnectable streams and they thus need to wait for timeout, keep holding until screen changes. Note, you can change probe_timeout per camera stream if needed).
Keys F1 to F12 (or keypad 0 to 9), will force the equal numbered screen to be shown onscreen (this takes longer depending on amount of unconnectable streams and they thus need to wait for timeout, keep holding until screen changes. Note, you can change probe_timeout per camera stream if needed).
Disable rotation (as in pause rotation, as in fix the current displayed screen) dynamically during runtime. By pressing "p" (or keypad "*") to pause or "r" (or keypad ".")' to resume/rotate. This overrides the disable_autorotation option if this has been set in the config file.
-
I advise you to test your urls in vlc or omxplayer (command line) first. It should work in these applications before attempting to use them in rpisurv
-
If you used the install.sh script, logs are created at /usr/local/bin/rpisurv/logs/. You can use them for troubleshooting. Enable DEBUG logging for very detailed output of what is going on. see logging_config
-
If you are connected via keyboard/keypad, you can stop rpisurv by pressing and holding q (or keypad "/") (this can take some seconds) .
-
To manage the screen without rebooting use systemctl
sudo systemctl stop rpisurv
to stop the screensudo systemctl start rpisurv
to start the screensudo systemctl status rpisurv
to see last log and status of service
-
If you want to stream rtsp over tcp please add
rtsp_over_tcp: true
to the stream in /etc/rpisurv.conf. See example config file for an example. If you have a "smearing" effect this option may resolve it. Note that you need a version of omxplayer older then 14 March 2016 (popcornmix/omxplayer#433) to do this. -
On a raspberry pi 3 it seems the default overscan settings are not good. If full screen is not used, if you have an unused bar in the bottom -> try to set
disable_overscan=1
in /boot/config.txt
Feature requests are tracked on https://community.rpisurv.net. If you would like to have a feature implemented on rpisurv, please check that this is not already been requested on https://community.rpisurv.net. If it is then add your vote to it, if it is not then request it as a new feature. The votes give us an indication on how feature requests compare to each other regarding popularity.